© 1999 CANON INC. CANON BJC-6000 SE 0199 0.30-0 PRINTED IN JAPAN (IMPRIME AU JAPON)
0199 SE 0.30-0
This manual is published by Canon Inc. for qualified persons and contains the necessary technical
information for technical theory, installation, maintenance, and repair of products. This manual
covers all localities where the products are sold. For this reason, it may contain information that
does not apply to your locality.
This manual may include technical inaccuracies or typographical errors due to improvements or
changes in the products. When amendments are made to the content of this manual, Canon will issue
technical information as the need arises. In the event of major alterations to the content of this
manual over a long or short period, Canon will publish a revised version of the manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
The product names and company names appearing in this manual are the registered trademarks or
trademarks of the individual companies.
This manual is copyrighted and all rights reserved. Under the copyright laws, this manual may not
be copied, reproduced, or translated into other languages, in whole or in part, without the express
written consent of Canon Inc. except in the case of internal business use.
© 1999 by Canon Inc.
BJ Products Quality Support Dept.
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213, Japan
This manual was produced on an Apple Macintosh
TM Power Mac 9600/233 personal computer and
TM II NTX-J laser beam printer; final pages were printed on VarityperTM 5300 with
4000-J RIP. A Canon mo-5001S Magneto-Optical Storage Subsystem with mo-502M Magneto-Optical
Storage Disk Cartridge and mo-IF2 interface kit were used for storing large volumes of page layout
and graphic data for this manual.
All graphics were produced with MACROMEDIA FREEHAND
All documents and all page layouts were created with QuarkXPress
I. ABOUT THIS MANUAL
This manual is divided into five parts containing the information required for
servicing the BJC-6000 printer.
Part 1: Safety and Precautions
This part contains information on how to service the unit safety. It is very
important, and must be read.
Part 2: Product Specifications
This part outlines the product and its specifications.
Part 3: Operating Instructions
This part explains how to operate the unit properly, how it is installed, and how
to use the service mode.
Part 4: Technical Reference
This part outlines the unit operation giving a technically.
Part 5: Maintenance
This part explains maintenance of the unit. It includes details of disassembly /
assembly, adjustments required when assembling, troubleshooting procedures, and
wiring / circuit diagrams, etc.
This manual does not contain complete information required for
disassembling and assembling the BJC-6000 printer. Please also refer
to the separate Parts Catalog.