© 1998 CANON INC. CANON BJC-2000 1098 SC 0.40-0 PRINTED IN JAPAN (IMPRIME AU JAPON)
1098 SC 0.40-0
This manual has been issued by Canon Inc. for qualified persons to lear n technical theory,
installation, maintenance, and repair of products.
This manual covers all localities where the
products are sold. For this reason, there may be information in this manual that does not apply to
This manual could include technical inaccuracies or typographical errors due to improvements or
changes in the products.
When changes occur in applicable products or in the content of this
manual, Canon will release technical information as the need arises. In the event of major changes in
the contents of this manual over a long or short period, Canon will issue a new editions of this
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
The product names and company names described in this manual are the registered trademarks of
the individual companies.
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not
be copied, reproduced or translated into another language, in whole or in part, without the written
consent of Canon Inc., except in the case of internal business use.
© 1998 by Canon Inc.
BJ Products Technical Support Dept
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213, Japan
This manual was produced on an Apple Macintosh
TM Power Mac 8500/180 personal computer and
TM 16/600PS-J laser beam printer; final pages were printed on VarityperTM 5300 with
4000-J RIP. All graphics were produced with MACROMEDIA
® FREEHAND® 7.0J.
All documents and all page layouts were created with QuarkXPress
I. ABOUT THIS MANUAL
This manual is divided into four sections, and contains information required for servicing
Part 1: Safety and Precautions
This section tells you how to service the unit safely. It is very important, so please read
Part 2: Product Specifications
This section outlines and specification.
Part 3: Operating Instructions
This section explains how to operate the unit properly. Information required about
installation and service made.
Part 4: Technical Reference
This section outlines the way the unit operates so you can understand it technically.
Part 5: Maintenance
This section explains how to maintain the unit. Descriptions of assembly/disassembly,
adjustment for assembly, troubleshooting procedures, and wiring/circuit diagrams are
Procedures for assembly/disassembly are not given in this manual.
See the illustrations in the separate Parts Catalog.