background image
Vi
deo
Pr
oject
or
VPL-HS3
4-099-552-11 (1)
Video Projector
Operating Instructions
__________________________________ GB
Mode d'emploi
________________________________________ FR
Manual de instrucciones
_________________________________ ES
© 2003 Sony Corporation
VPL-HS3


background image
GB
2
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
For the customers in the USA
If you have any questions about this product, you may
contact:
Sony Electronics Inc.
Attn: Business Information Center (BIC)
12451 Gateway Boulevard
Ft. Myers, Florida 33913
Telephone No.: 800-686-7669
The number below is for FCC related matters only.
Declaration of Conformity
Trade Name: SONY
Model No.: VPL-HS3
Responsible Party: Sony Electronics Inc.
Address: 680 Kinderkamack Road, Oradell
NJ 07649 U.S.A.
Telephone No.: 201-930-6972
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
For the customers in Canada
This Class B digital apparatus complies with Canadian
ICES-003.
Voor de klanten in Nederland
Dit apparaat bevat een vast ingebouwde batterij die niet
vervangen hoeft te worden tijdens de levensduur van het
apparaat.
Raadpleeg uw leverancier indien de batterij toch
vervangen moet worden. De batterij mag alleen
vervangen worden door vakbekwaam servicepersoneel.
Gooi de batterij niet weg maar lever deze in als klein
chemisch afval (KCA).
Lever het apparaat aan het einde van de levensduur in
voor recycling, de batterij zal dan op correcte wijze
verwerkt worden.
WARNING
This symbol is intended to alert the user to
the presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the
appliance.
The socket-outlet should be installed near the
equipment and be easily accessible.


background image
3 GB
Table of Contents
Precautions ............................................. 4
Connections and Preparations
Unpacking ............................................... 5
Step 1: Installing the Projector .............. 6
Before Setting Up the Projector ..................... 6
Installing the Projector and a Screen.............. 7
Step 2:
Connecting the Projector ....................... 9
Connecting to a DVD Player/Digital Tuner . 10
Connecting to Video Equipment .................. 11
Connecting to an AV Amplifier ................... 11
Connecting to "PlayStation 2," etc............... 12
Connecting to a Computer ........................... 13
Connecting to Vavious Equipment using the
Optional Interface Unit............................ 14
Step 3: Adjusting the Picture Size and
Position .................................................. 15
Step 4:
Selecting the Menu Language ............. 20
Projecting
Projecting the Picture on the Screen .. 22
Selecting the Wide Screen Mode ........ 24
Selecting the Picture Viewing Mode ... 26
Using the Menus
Operation through the Menus ..............27
Menu Lists .............................................29
Menu Configurations ....................................... 29
Menu Items ................................................... 29
About the Preset Memory No. ...................... 32
Adjusting Picture Quality of a Signal from the
Computer.................................................. 33
Others
Troubleshooting .......................................34
Replacing the Lamp .................................36
Replacing the Air Filter ............................38
Specifications ...........................................39
Location of Controls ................................45
Front.............................................................. 45
Rear ............................................................... 46
Bottom .......................................................... 46
Remote Control ................................................ 47
Index ..........................................................48


background image
GB
4 Precautions
On safety
· Check that the operating voltage of your unit is
identical with the voltage of your local power
supply.
· Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it further.
· Unplug the unit from the wall outlet if it is not to be
used for several days.
· To disconnect the cord, pull it out by the plug. Never
pull the cord itself.
· The wall outlet should be near the unit and easily
accessible.
· The unit is not disconnected to the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
· Do not look into the lens while the lamp is on.
· Do not place your hand or objects near the
ventilation holes. The air coming out is hot.
On preventing internal heat build-up
After you turn off the power with the I / 1 (on/
standby) switch, do not disconnect the unit from the
wall outlet while the cooling fan is still running.
Caution
The projector is equipped with ventilation holes
(intake) and ventilation holes (exhaust). Do not block
or place anything near these holes, or internal heat
build-up may occur, causing picture degradation or
damage to the projector.
On repacking
Save the original shipping carton and packing
material; they will come in handy if you ever have to
ship your unit. For maximum protection, repack your
unit as it was originally packed at the factory.
Precautions


background image
Con
n
ect
ions
a
n
d
P
repar
ati
o
n
s
5 GB
Unpacking
Connections
and
Preparations
Check the carton to make sure it contains the
following items:
AC power cord (1)
Operating Instructions (this manual) (1)
Inserting the batteries into the remote
control
This section describes how to install the
projector and screen, how to connect the
equipment from which you want to project
the picture, etc.
Unpacking
Remote control (1),
Size AA (R6)
batteries (2)
Signal interface
cable (1)
Air filter (for
replacement) (1)
Adjuster spacers (2)
Insert the batteries E side first as shown
in the illustration.
Inserting them forcibly or with the
polarities reversed may cause a short
circuit and may generate heat.