background image
4-097-129-11(1)
© 2003 Sony Corporation
TFT LCD Color
Computer Display
Quick Setup Guide
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (US)
Troubleshooting / Specifications . . . . . . . . . . . . . . . . . . . . . . . 4 (US)
Guide de configuration rapide
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (FR)
Dépannage / Spécifications . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (FR)
Guía de instalación rápida
Instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (ES)
Resolución de problemas / Especificaciones . . . . . . . . . . . . . 4 (ES)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (CS)
. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (CS)
US
FR
ES
SDM-HX73
SDM-HX93
CS
DO NOT RETURN TO PLACE OF PURCHASE
NE PAS RETOURNER AU MAGASIN
If you believe the product purchased in the U.S. is
defective, call Sony for assistance or Advance Exchange.
For assistance in the U.S. call: 1-866-357-SONY (7669)
For assistance in Canada call: 1-800-961-SONY (7669)
Si vous croyez que le produit achete aux E.-U. est defectueux, communiquer
avec Sony pour obtenir de lfaide ou un remplacement.
Pour obtenir de lfaide aux E.-U., composer le : 1-866-357-SONY (7669)
Pour obtenir de lfaide au Canada, composer le :1-800-961-SONY (7669)
http://www.sony.com/displays/support


background image
2 (US)
D:\##SAGYO\0710\to maruyamasama QSG-UC\823972S SDM-HX73 QSG UC\823972S SDM-
HX73 QSG UC\4097129111 SDM-HX73-HX93-UC QSG\02GB02BAS-UC.fm
masterpage:Left
SDM-HX73/HX93
4-097-129-11(1)
WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
Precautions
Warning on power connections
· Use the supplied power cord. If you use a different power cord,
be sure that it is compatible with your local power supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will not
conform to mandatory FCC standards.
For the customers in the UK
If you use the monitor in the UK, be sure to use the appropriate
UK power cord.
Installation
Do not install or leave the monitor:
· In places subject to extreme temperatures, for example near a
radiator, heating vent, or in direct sunlight. Subjecting the
monitor to extreme temperatures, such as in an automobile
parked in direct sunlight or near a heating vent, could cause
deformations of the casing or malfunctions.
· In places subject to mechanical vibration or shock.
· Near any equipment that generates a strong magnetic field,
such as a TV or various other household appliances.
· In places subject to inordinate amounts of dust, dirt, or sand, for
example near an open window or an outdoor exit. If setting up
temporarily in an outdoor environment, be sure to take
adequate precautions against airborne dust and dirt. Otherwise
irreparable malfunctions could occur.
Note on the LCD (Liquid Crystal Display)
Please note that the LCD screen is made with high-precision
technology. However, black points or bright points of light (red,
blue, or green) may appear constantly on the LCD screen, and
irregular colored stripes or brightness may appear on the LCD
screen. This is not malfunction.
(Effective dots: more than 99.99%)
About the built-in stereo speakers
Be sure to keep magnetic recording equipment, tapes, and floppy
discs away from the speaker's opening as the speakers generate a
magnetic field. This magnetic field may affect data stored on
magnetic tapes and discs.
Transportation
· Disconnect all cables from the monitor, and grasp both side of
the LCD display firmly taking care not to scratch the screen
when transporting. If you drop the monitor, you may be injured
or the monitor may be damaged.
· When you transport this monitor for repair or shipment, use the
original carton and packing materials.
To view the Operating Instructions
on the CD-ROM
Note
To view the Operating Instructions on the CD-ROM, Macromedia
Shockwave Player and Adobe Acrobat Reader (version 4.0 or later) must
be installed on your computer. The "installs" folder on the CD-ROM
contains the installation programs for them (for Windows only).
To view the Operating Instructions
Load the supplied CD-ROM into the CD-ROM drive of your computer.
After a while, the introductory page of the CD-ROM will open
automatically. Then follow the instructions below, according to the area
you live in.
For customers in the USA
1
Click "North America" on the introductory page.
The model page appears.
2
Point to "HX MODELS" and click the model name of the unit you
have purchased on the drop-down list.
The page for the model you have selected appears.
3
Click "USER MANUAL:ADOBE.PDF."
The language options appear.
4
Click the desired language.
The Operating Instruction file opens.
To exit the procedure
Click "EXIT/CD.ROM."
For customers in Asia
1
Click "Asia" on the introductory page.
2
Click the "HX" folder.
3
Double-click on "index.html."
The Operating Instruction file opens.
To open the Operating Instructions file directly
Click the folders and the file in the following order.
CD-ROM
t "manuals" t desired language folder t "*****.pdf "
(***** is the name of the model you have purchased.)
If the introductory page does not appear
automatically
Follow the instructions below to open that page.
If you are using Windows:
Double-click on the CD-ROM icon.
If you are using a Macintosh computer:
Double-click on the CD-ROM icon to open the window, then double-click
on the "MONITOR" icon.
The equipment should be installed near an easily accessible outlet.
Example of plug types
for 100 to 120 V AC
for 200 to 240 V AC
for 240 V AC only


background image
3 (US)
US
Setup
Unpacking
Make sure your carton contains everything listed below.
· LCD display
·Power cord
· HD15-HD15 video signal cable (analog RGB)
· DVI-D video signal cable (digital RGB)
· Audio cord (stereo miniplug)
· CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
· Warranty card
· This Quick Setup Guide
Connecting your monitor
Connect your monitor to a computer or other equipment.
1 Slide up the back cover.
2 Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
3 Connect the supplied power cord securely to the
monitor's AC IN connector.
4 Connect the other end securely to a power outlet.
Note
For bundling the cords and cables, refer to the Operating Instructions on
the supplied CD-ROM.
Turning on the monitor and
computer
Turn on your monitor first, then a computer.
1 Press the 1 (power) switch on the front of the
monitor.
The 1 (power) indicator lights up in green.
2 Turn on the computer.
· Turn off the monitor, computer, and any other
equipment before connecting them.
· Do not touch the pins of the video signal cable plug.
back cover
1
HD-15
AUDIO
IN
DVI-D
AUDIO IN
AUDIO IN
HD-15
INPUT 1
INPUT 2
INPUT 3
to the DVI-D input
connector (digital RGB)
to the HD15 input
connector (analog RGB)
audio cord
(supplied)
DVI-D video
signal cable
(digital RGB)
(supplied)
4
power cord (supplied)
3
to AC IN
to power outlet
HD15-HD15 video signal
cable (analog RGB)
(supplied)
2
OK
INPUT
MENU
1
lights in green


background image
4 (US)
Troubleshooting
Trouble symptoms and remedies (If no picture appears on the screen)
If no picture appears on the screen, check the following table for possible solutions. Then, if the problem persists, use the self-diagnosis
function (page 5 (US)). If you are experiencing difficulties not listed below, refer to the Operating Instructions on the supplied CD-ROM.
For problems caused by a computer or other equipment, refer to the user's manuals supplied with the respective items.
Symptom
Check these items
If the 1 (power) indicator is not lit,
or if the 1 (power) indicator will not
light up when the 1 (power) switch
is pressed,
· Check that the power cord is properly connected.
If the 1 (power) indicator is green,
· Use the self-diagnosis function (page 5 (US)).
If "CABLE DISCONNECTED"
appears on the screen,
· Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets (page 3 (US)).
· Check that the video input connector's pins are not bent or pushed in.
· Check that the input select setting is correct (For details, refer to the Operating
Instructions on the supplied CD-ROM).
· A non-supplied video signal cable is connected. If you connect a non-supplied video
signal cable, "CABLE DISCONNECTED" may appear on the screen. This is not a
malfunction.
If "NO INPUT SIGNAL" appears on
the screen, or the 1 (power)
indicator is orange,
· Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets (page 3 (US)).
· Check that the video input connector's pins are not bent or pushed in.
· Check that the input select setting is correct (For details, refer to the Operating
Instructions on the supplied CD-ROM).
x Problem caused by a computer or other equipment connected, and not
caused by the monitor
· The computer is in the power saving mode. Try pressing any key on the keyboard or
moving the mouse.
· Check that your graphics board is installed properly.
· Check that the computer's power is on.
· Restart the computer.
If "OUT OF RANGE" appears on
the screen,
x Problem caused by a computer or other equipment connected, and not
caused by the monitor
· Check that the video frequency range is within that specified for the monitor. If you
replaced an old monitor with this monitor, reconnect the old monitor and adjust the
computer's graphics board within the following ranges:
Horizontal frequency: 28­80 kHz (Analog RGB), 28­64 kHz (Digital RGB)
Vertical frequency: 48­75 Hz (Analog RGB), 60 Hz (Digital RGB)
Resolution: 1280
× 1024 or less
If you are using Windows and
replaced an old monitor with this
monitor,
· If you replaced an old monitor with this monitor, reconnect the old monitor and do the
following. Select "SONY" from the "Manufacturers" list and select "SDM-HX73 or
SDM-HX93" from the "Models" list in the Windows device selection screen. If "SDM-
HX73 or SDM-HX93" does not appear in the "Models" list, try "Plug & Play."
If using a Macintosh system,
· When connecting a Macintosh computer, use an adapter (not supplied) if necessary.
Connect the adapter to the computer before connecting the video signal cable.


background image
5 (US)
US
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1 Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2 Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor's
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
If any problem persists, call your authorized Sony dealer and give
the following information:
· Model name: SDM-HX73 or SDM-HX93
· Serial number
· Detailed description of the problem
· Date of purchase
· Name and specifications of your computer and graphics board
· Type of input signals (analog RGB/digital RGB)
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:
17 inch (43 cm) (SDM-HX73)
19 inch (48 cm) (SDM-HX93)
Input signal format
RGB operating frequency*
Horizontal
× Vertical:
28­80 kHz
× 48-75 Hz (analog RGB)
28­64 kHz
× 60 Hz (digital RGB)
Resolution
Horizontal
× Vertical: Max.
1280 dots
× 1024 lines
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75
, positive
SYNC signal:
TTL level, 2.2 k
, positive or negative
(Separatehorizontal and vertical, or composite sync)
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms
Speaker output
3 W
× 2
Headphones jack
Stereo minijack
Power requirements
SDM-HX73
100 ­ 240 V, 50 ­ 60 Hz, Max. 1.0 A
SDM-HX93
100 ­ 240 V, 50 ­ 60 Hz, Max. 1.1 A
Power consumption
Max. 50 W (SDM-HX73)
Max. 60 W (SDM-HX93)
Operating temperature
5 ­ 35°C
Dimensions (width/height/depth)
Display (upright):
SDM-HX73
Approx. 414
× 418.5 × 232 mm
(16 3/8
× 16 1/2 × 9 1/4 inches)
SDM-HX93
Approx. 466.5
× 468 × 265 mm
(18 3/8
× 18 1/2 × 10 1/2 inches)
Mass
SDM-HX73
Approx. 6.5 kg (14 lb 5 oz)
SDM-HX93
Approx. 8.5 kg (18 lb 12 oz)
Plug & Play
DDC2B
Included items
See "Setup."
* Recommended horizontal and vertical timing condition
· Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec, whichever is larger.
· Horizontal blanking width should be more than 2.5 µsec.
· Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
MENU
Example
Model name
Serial number
INFORMATION
MODEL : SDM-HX93
SER. NO : 1234567
MANUFACTURED : 2003-40
Week and
year of
manufacturee