background image
COMPONENT MODEL NAME FOR LBT-DR4/DR5/DR6/DR440/W300/W5000/
XB500
LBT-DR4/DR5/DR6/DR440/
W300/W5000/XB500
US Model
LBT-W300/W5000
Canadian Model
LBT-W300
AEP Model
UK Model
LBT-XB500
E Model
LBT-DR4/DR5/DR6/DR440
Australian Model
LBT-DR4
SERVICE MANUAL
MICROFILM
COMPACT Hi-Fi STEREO SYSTEM
· LBT-DR4/DR5/DR6/DR440/W300/W5000/XB500 is composed
following models.
As for the service manual, it is issued for each component model,
then, please refer to it.
General
Power requirements
North American model:
120 V AC, 60 Hz
European model:
230 V AC, 50 / 60 Hz
Mexican model:
120 V AC, 50 / 60 Hz
Australian models:
230 - 240 V AC, 50 / 60 Hz
Other models:
120 V, 220V, or 230 - 240 V AC, 50 / 60 Hz
Adjustable with voltage selector
Power consumption
(LBT-DR6)
220 watts
(LBT-DR5)
200 watts
(LBT-DR440/DR4)
170 watts
(LBT-W5000/W300)
U.S.A. model:
300 watts
Canadian model:
300 VA
(LBT-XB500)
180 watts
SPECIFICATIONS
LBT-DR4
LBT-DR5
LBT-DR6
LBT-DR440 LBT-W300 LBT-W5000 LBT-XB500
COMPACT DISC
DECK RECEIVER
HCD-DR4 HCD-DR5 HCD-DR6 HCD-DR440HCD-W300 HCD-W5000 HCD-XB500
SYSTEM
SPEAKER SYSTEM SS-DR4
SS-DR5
SS-DR6
SS-XB500
Supplied accessories
AM loop antenna (1)
Remote RM-SR5 (1)
R6 (size AA) batteries (2)
FM wire antenna (1)
Speaker cords (2)
Design and specifications are subject to change without notice.


background image
Sony Corporation
Home A&V Products Company
PARTS LIST
Ref. No. Part No.
Description
Remark
ACCESSORIES & PACKING MATERIALS
********************************
1-475-572-41 COMMANDER, STANDARD (RM-SR5B)
1-501-374-11 ANTENNA, LOOP
1-501-659-41 ANTENNA (FM) (EXCEPT AEP, UK)
1-501-804-11 ANTENNA (FM) (AEP, UK)
1-775-512-21 CORD, SPEAKER
3-865-548-11 MANUAL, INSTRUCTION (ENGLISH)
3-865-548-21 MANUAL, INSTRUCTION (FRENCH) (CND, EA)
3-865-548-31 MANUAL, INSTRUCTION (SPANISH) (AR,MX)
3-865-548-41 MANUAL, INSTRUCTION (FRENCH, SPANISH)
(E,SP, MY)
3-865-548-51 MANUAL, INSTRUCTION (CHINESE) (SP, MY)
3-865-548-61 MANUAL, INSTRUCTION (ARABIC) (EA)
3-865-548-71 MANUAL, INSTRUCTION (GERMAN) (AEP)
3-865-548-81 MANUAL, INSTRUCTION (DUTCH, ITALIAN,
PORTUGUESE, SWEDISH) (AEP)
3-865-548-91 MANUAL, INSTRUCTION (POLISH,RUSSIAN)
(AEP)
3-865-549-11 MANUAL, INSTRUCTION (CZECH) (AEP)
3-865-549-21 MANUAL, INSTRUCTION (HUNGARIAN) (AEP)
3-865-549-31 MANUAL, INSTRUCTION (TURKISH) (AEP)
3-865-549-41 MANUAL, INSTRUCTION (GREEK) (AEP)
3-865-550-31 MANUAL, INSTRUCTION (GREEK/THAI) (TH)
3-866-372-11 MANUAL, INSTRUCTION
(ENGLISH, FRENCH,GERMAN, SPANISH,
DUTCH, SWEDISH, ITALIAN, PORTUGUESE,
POLISH,RUSSIAN, DANISH, FINNISH,
HUNGARIAN, CZECH, GREEK, TURKISH)
(SS-XB500)
4-210-254-01 CUSHION (FOOT)
4-998-173-01 COVER, BATTERY (FOR RM-SR5B)
99B001689-1
Printed in Japan ©1999.2
Published by Quality Assurance Dept.
(Shinagawa)
9-928-826-11
- 2 -
· Abbreviation
CND : Canadian model
MX : Mexican model
EA : Saudi Araboa model
AR : Argemtome model
SP : Singapore model
TH : Thai model
MY : Malaysia model


background image
­ 1 ­
HCD-DR4/DR5/DR6/DR440/
W300/W5000/XB500
US Model
HCD-W300/W5000
Canadian Model
HCD-W300
AEP Model
UK Model
HCD-XB500
E Model
HCD-DR4/DR5/DR6/DR440
Australian Model
HCD-DR4
SPECIFICATIONS
Photo: HCD-DR6
COMPACT DISC DECK RECEIVER
-- Continued on next page --
Model Name Using Similar Mechanism
HCD-D290/G3300/XB3
CD Mechanism Type
CDM37M-5BD32L
Base Unit Type
BU-5BD32L
Optical Pick-up Type
KSS-213D/Q-N
Model Name Using Similar Mechanism
NEW
Tape Transport Mechanism Type
TCM-230AWR2/230PWR2
CD
SECTION
TAPE DECK
SECTION
MICROFILM
SERVICE MANUAL
HCD-DR4/DR5/DR6/DR440/W300/W5000/
XB500 is the tuner, deck, CD and amplifier
section in LBT-DR4/DR5/DR6/DR440/W300/
W5000/XB500.


background image
­ 2 ­


background image
­ 3 ­
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
Notes on chip component replacement
· Never reuse a disconnected chip component.
· Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
· Keep the temperature of soldering iron around 270°C
during repairing.
· Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
· Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY MARK
! OR DOTTED LINE
WITH MARK
! ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
!SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS
SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
This appliance is classified as
a CLASS 1 LASER product.
The CLASS 1 LASER PROD-
UCT MARKING is located on
the rear exterior.
This caution
label is located
inside the unit.
SAFETY CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety checks before releasing the set to the customer:
Check the antenna terminals, metal trim, "metallized" knobs, screws,
and all other exposed metal parts for AC leakage. Check leakage as
described below.
LEAKAGE
The AC leakage from any exposed metal part to earth Ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microampers). Leak-
age current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers' instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM
or battery-operated AC voltmeter. The "limit" indication is 0.75
V, so analog meters must have an accurate low-voltage scale.
The Simpson 250 and Sanwa SH-63Trd are examples of a pas-
sive VOM that is suitable. Nearly all battery operated digital
multimeters that have a 2V AC range are suitable. (See Fig. A)
Fig. A. Using an AC voltmeter to check AC leakage.
0.15
µF
To Exposed Metal
Parts on Set
1.5k
AC
voltmeter
(0.75V)
Earth Ground