SERVICE MANUAL
HVL-HIRL
VIDEO IR LIGHT
SPECIFICATIONS
PARTS LIST
Ref. No.
Part No.
Description
1
A-1104-722-A FRONT ASSY
2
A-1099-823-A LAMP (SERVICE USE), XENON
3
A-1104-723-A MAIN ASSY
4
3-082-390-01 POUCH
5
2-591-309-01 LABEL, TEMPERATURE CAUTION
(EXCEPT CH)
5
not supplied
LABEL, TEMPERATURE CAUTION (CH)
2-588-493-01 MANUAL, INSTRUCTION (JAPANESE,
ENGLISH, FRENCH, SPANISH,
SIMPLIFIED CHINESE) (US, CND, AEP, CH)
2-588-493-11 MANUAL, INSTRUCTION (GERMAN, DUTCH,
ITALIAN, TRADITIONAL CHINESE, KOREAN)
(AEP)
2-588-493-21 MANUAL, INSTRUCTION (SWEDISH,
PORTUGUESE, RUSSIAN, ARABIC) (AEP)
· Abbreviation
CH: Chinese model
CND: Canadian model
Sony EMCS Co.
2005B0500-1
© 2005.2
Published by DI Technical Support Section
9-876-860-11
US Model
Canadian Model
AEP Model
Chinese Model
Ver 1.0 2005.02
HVL-HIRL
1
3
2
xenon lamp
(not supplied)
exchange jig
(not supplied)
5
4
IR light segment
Power requirements
7.2 V DC
Power consumption
Approx. 2.6 W
Recording distance of the IR light Approx. 7 m (23 ft) (NightShot (plus))
(when the zoom is in the tele end Approx. 20 m (65 ft) (Super NightShot
position)
(plus))
Continuous lighting time
Lighting duration
Type of battery pack
Used with camcorder (DCR-HC90)*
NP-FA50
45 (40)
NP-FA70
90 (80)
(Approx. minutes using fully-charged battery pack)
* When used with the LCD panel closed. Duration with the LCD panel
open is shown in parentheses.
Video light segment
Power requirements
7.2 V
Power consumption
Approx. 3.6 W
Halogen lamp
6 V DC/3 W
Maximum luminous intensity Approx. 100 cd
Lighting direction
Horizontal
Lighting angle
Approx. 15 degrees
Continuous lighting time
Lighting duration
Type of battery pack
Used with camcorder (DCR-HC90)*
NP-FA50
35 (30)
NP-FA70
70 (60)
(Approx. minutes using fully-charged battery pack)
* When used with the LCD panel closed. Duration with the LCD panel
open is shown in parentheses.
Illumination range
Approx. 1 m (3 1/5 ft) (100 lux),
Approx. 2 m (6 1/2 ft) (25 lux),
Approx. 3 m (9 4/5 ft) (11 lux)
Colour temperature
Approx. 3,000 °K
Average life of bulb
Approx. 100 hours
Dimensions
Approx. 38.5
× 60.5 × 40.5 mm
(1 9/16
× 2 1/2 × 1 5/8 in.) (w/h/d)
Mass
Approx. 40 g (1.5 oz.)
Included items
Video IR light (1)
Pouch (1)
Set of printed documentation
Design and specifications are subject to change without notice.
Replacing the lamp
Use the Sony XB-3L xenon lamp. Consult your Sony dealer or local
authorized Sony service facility for replacement of xenon lamp XB-3L.
Order the following parts number when purchasing the xenon lamp : A-
1099-823-
s.
The lamp is hot when it has just burned out. Wait until the lamp cools
down before removing it.
1 Remove the front cover by inserting something like a coin after
making sure that the unit is cool enough to handle.
2Replace the lamp.
1 Cover the old lamp with the tube supplied with the new
lamp for replacement and pull the tube out to replace the old
lamp.
2 Insert the new lamp into the socket straightly.
*Do not tilt the lamp.
3Insert the pawls on the front cover and attach it.
Notes
· The lamp is hot when it has just burned out. Make sure that the lamp is
cool enough to handle.
· To prevent the lamp from being smudged with fingerprints, handle it
with a dry cloth. If the lamp is smudged, wipe it completely clean.
12
3
Revision History
Reverse
Ver.
1.0
Date
2005.02
History
Official Release
Contents
--
S.M. Rev.
issued
--
987686011.pdf
HVL-HIRL