background image
SERVICE MANUAL
DIGITAL COLOR PRINTER
AEP Model
UK Model
SPECIFICATIONS
FVP-1E
9-928-114-31
Printing system
Sublimation dye transfer printing
(Yellow/Magenta/Cyan 3 pass)
Effective pixels
1,376 (H)
× 1,024 (V) dot
Printing size
114 (H)
× 85 (V) mm (maximum)
(41/
2 × 3
3/
8 inches)
Gradations
256 levels (8 bits), per color (24 bits)
Approx. 16,770,000 colors
Printing time (excluding data transmission time)
Approx. 100 seconds per sheet
Input/output connectors
VIDEO INPUT connector (phono jack
× 1)
1 Vp-p, 75 ohms (unbalanced),
sync nagative
S VIDEO INPUT connector
(4-pin mini-DIN
× 1)
Y: 1 Vp-p, 75 ohms (unbalanced),
sync negative
C: 0.286 Vp-p (color burst),
75-ohms (unbalanced)
VIDEO OUTPUT connector
(phono jack
× 1)
1 Vp-p, 75 ohms (unbalanced),
sync negative
3.5" Floppy disk drive
Print cartridge and Print paper (100
× 140 mm (4 × 55/
8inches))
VPM-P50STB (Standard papers)
VPM-P200STB (Standard papers)
VPM-P50WTB (Adhesive-label sheets
for sticker)
VPM-P50S04B (4-cut adhesive-label
sheets for sticker)
VPM-P50S16B (16-cut adhesive-label
sheets for sticker)
Power requirements
220 ­ 240 V AC
Power consumption
72 W (printing)
13 W (stand by mode)
Operating temperature
5
°C to 35 °C (41 °F to 95 °F)
Operating humidity
20% to 80%
Dimensions
Approx. 301
× 83 × 246 mm
(w/h/d, excluding protruding parts)
(12
× 33/
8 × 9
7/
8 inches)
Mass
Approx. 3 kg (6 lb 10 oz)
Supplied accessories
AC power cord (1)
Video connecting cable (1)
CD-ROM (for Microsoft Windows®
95/98/NT4.0) (1)
Instruction Manual (1)
User's guide for the printer utility (1)
Warranty (1)
Design and specifications are subject to change without notice.


background image
­ 2 ­
TABLE OF CONTENTS
1.
GENERAL
Identifying the parts ..................................................... 1-1
Setting Up .................................................................... 1-1
Printing ......................................................................... 1-4
Making Various Prints .................................................. 1-5
2.
DISASSEMBLY ...................................................... 2-1
3.
MECHANICAL ADJUSTMENTS .................... 3-1
4.
ELECTRICAL ADJUSTMENTS ...................... 4-1
5.
DIAGRAMS
5-1.
Block Diagram ­ VIDEO Section ­ ........................... 5-1
5-2.
Block Diagram ­ MAIN Section ­ .............................. 5-5
5-3.
Frame Schematic Diagram .......................................... 5-9
5-4.
Notes for Printed Wiring Board and
Schematic Diagram ...................................................... 5-12
5-5.
Printed Wiring Board ­ VS-39 Board ­ ..................... 5-13
5-6.
Schematic Diagram ­ VS-39 Board ­ ......................... 5-13
5-7.
Printed Wiring Board ­ FE-39 Board ­ ....................... 5-14
5-8.
Schematic Diagram ­ FE-39 Board ­ .......................... 5-14
5-9.
Printed Wiring Board ­ VI-39 Board ­ ...................... 5-15
5-10. Schematic Diagram ­ VI-39 Board ­ .......................... 5-17
5-11. Printed Wiring Board ­ DK-39 Board ­ ..................... 5-23
5-12. Schematic Diagram ­ DK-39 Board (1/3) ­ ............... 5-25
5-13. Schematic Diagram ­ DK-39 Board (2/3) ­ ............... 5-30
5-14. Schematic Diagram ­ DK-39 Board (3/3) ­ ............... 5-35
5-15. Printed Wiring Board ­ SW-39 Board ­ ..................... 5-37
5-16. Schematic Diagram ­ SW-39 Board ­ ........................ 5-39
5-17. Printed Wiring Boards
­ MD-39/JD-39/RD-39/HP-39 Boards ­ .................... 5-41
5-18. Schematic Diagram
­ MD-39/JD-39/RD-39/HP-39 Boards ­ .................... 5-43
5-19. IC Pin Function Description ........................................ 5-51
6.
EXPLODED VIEWS ............................................. 6-1
7.
ELECTRICAL PARTS LIST ............................ 7-1
Flexible Circuit Board Repairing
· Keep the temperature of the soldering iron around 270 °C dur-
ing repairing.
· Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
· Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
· Never reuse a disconnected chip component.
· Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
ADVARSEL
Eksplosjonsfare ved feilaktig skifte av batteri.
Benytt samme batteritype eller en tilsvarende type
anbefalt av apparatfabrikanten.
Brukte batterier kasseres i henhold til fabrikantens
instruksjoner.
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en likvärdig typ som
rekommenderas av apparattillverkaren.
Kassera använt batteri enligt gällande föreskrifter.
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin.
Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
ADVARSEL!
Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandøren.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the manufacturer.
Discard used batteries according to the manufacturer's instructions.
· Microsoft, MS, MS-DOS and Windows® are registered
trademarks of Microsoft Corporation in the United States
and other countries.
· IBM PC/AT is a registered trademarks of IBM Corporation
of the U.S.A.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
! OR DOTTED
LINE WITH MARK
! ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.


background image
1-1
SECTION 1
GENERAL
This section is extracted from
instruction manual.


background image
1-2


background image
1-3