background image
SERVICE MANUAL
· INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.0 2003. 02
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
DIGITAL VIDEO CAMERA RECORDER
Z MECHANISM
Photo : DCR-TRV33
DCR-TRV33/TRV33E
RMT-814
US Model
Canadian Model
Korea Model
DCR-TRV33
AEP Model
UK Model
North European Model
East European Model
Chinese Model
Australian Model
DCR-TRV33E
E Model
Hong Kong Model
Tourist Model
DCR-TRV33/TRV33E


background image
-- 2 --
DCR-TRV33/TRV33E
SPECIFICATIONS
COVER
COVER
Video camera
recorder
System
Video recording system
2 rotary heads
Helical scanning system
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz,
stereo 1, stereo 2), 16 bits
(Fs 48 kHz, stereo)
Video signal
PAL colour, CCIR standards
Usable cassette
Mini DV cassette with the
mark printed
Tape speed
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time
(using cassette DVM60)
SP: 1 hour
LP: 1.5 hours
Fastforward/rewind time
(using cassette DVM60)
Approx. 2 min. and 40 seconds
Viewfinder
Electric viewfinder (colour)
Image device
3.8 mm (1/4.7 type)
CCD (Charge Coupled Device)
Gross: Approx. 1 070 000 pixels
Effective (still):
Approx. 1 000 000 pixels
Effective (moving):
Approx. 690 000 pixels
Lens
Carl Zeiss Vario-Sonnar
Combined power zoom lens
Filter diameter: 30 mm
(1 3/16 in)
10
× (Optical), 120× (Digital)
F = 1.8 ­ 2.0
Focal length
3.7 ­ 37 mm (5/32 ­ 1 1/2 in.)1)
50 ­ 500 mm (2 ­ 19 3/4 in.)2)
42 ­ 420 mm (1 11/16 ­ 16 5/8
in.)3)
1) When converted to a 35 mm still
camera
2) In CAMERA mode
3) In MEMORY mode
Colour temperature
Auto, HOLD, INDOOR (3 200 K),
OUTDOOR (5 800 K)
Minimum illumination
7 lx (lux) (F 1.8)
0 lx (lux) (in the NightShot
mode)*
* Objects unable to be seen due to
the dark can be shot with
infrared lighting.
Input/Output connectors
S video input /output
4-pin mini DIN
Luminance signal: 1 Vp-p,
75
(ohms), unbalanced
Chrominance signal:
75
(ohms), unbalanced
Audio/Video input /output
AV MINI JACK, 1 Vp-p,
75
(ohms), unbalanced
327 mV, (at output impedance
more than 47 k
(kilohms))
Output impedance with less than
2.2 k
(kilohms)/Stereo minijack
(ø 3.5 mm)
Input impedance more than
47 k
(kilohms)
DV input/output
4-pin connector
Headphone jack
Stereo minijack (ø 3.5 mm)
LANC jack
Stereo mini-minijack (ø 2.5 mm)
USB jack
mini-B
MIC jack
Minijack, 0.388 mV low impedance
with 2.5 to 3.0 V DC, output
impedance 6.8 k
(kilohms)
(ø 3.5 mm)
Stereo type
LCD screen
Picture
6.2 cm (2.5 type)
50.3
× 37.4 mm (2 ×1 1/2 in.)
Total dot number
123 200 (560
× 220)
NTSC color, EIA standards
DCR-TRV33:
DCR-TRV33E:
DCR-TRV33: 0.286 Vp-p,
DCR-TRV33E: 0.3 Vp-p,
General
Power requirements
7.2 V (battery pack)
8.4 V (AC Adaptor)
Average power consumption
(when using the battery pack)
DCR- TRV33 : 4.1 W 1)
DCR- TRV33E: 4.0 W 1)
DCR- TRV33 : 3.3 W 2)
DCR- TRV33E: 3.2 W 2)
1) During camera recording using
LCD
2) Viewfinder
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
­20
°C to + 60°C
(­4
°F to + 140°F)
Dimensions (approx.)
71
× 90 × 112 mm
(2 7/8
× 3 5/8 × 4 1/2 in.) (w/h/d)
Mass (approx.)
Main unit only
540 g (1 lb 2 oz)
Including the rechargeable battery
pack NP-FM30, cassette DVM60
and lens cap
630 g (1 lb 5 oz)
Supplied accessories
See page 3.
AC Adaptor
AC-L15A/L15B
Power requirements
100 ­ 240 V AC, 50/60 Hz
Current consumption
0.35 ­ 0.18 A
Power consumption
18 W
Output voltage
DC OUT: 8.4 V, 1.5 A
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
­20
°C to + 60°C
(­4
°F to + 140°F)
Dimensions (approx.)
56
× 31 × 100 mm
(2 1/4
× 1 1/4 × 4 in.) (w/h/d)
excluding projecting parts
Mass (approx.)
190 g (6.7 oz)
excluding power cord
Rechargeable
battery pack
NP-FM30
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
5.0 Wh (700 mAh)
Dimensions (approx.)
38.2
× 20.5 × 55.6 mm
(1 9/16
× 13/16 × 2 1/4 in.)
(w/h/d)
Mass (approx.)
65 g (2.3 oz)
Operating temperature
0
°C to 40°C (32°F to 104°F)
Type
Lithium ion
"Memory Stick"
Memory
Flash memory
8MB: MSA-8A
Operating voltage
2.7 ­ 3.6 V
Power consumption
Approx. 45 mA during operation
mode
Approx. 130
µA during tape
recording standby
Dimensions (approx.)
50
× 2.8 × 21.5 mm
(2
× 1/8 × 7/8 in.) (w/h/d)
Mass (approx.)
4 g (0.14 oz)
Design and specifications are
subject to change without notice.


background image
-- 3 --
DCR-TRV33/TRV33E
Checking supplied accessories.
Other accessories
3-080-369-11 MANUAL, INSTRUCTION (ENGLISH)
(TRV33:US,CND,E,HK,JE)
3-080-369-21 MANUAL, INSTRUCTION (FRENCH)(TRV33:CND)
3-080-369-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(TRV33:E,JE)
3-080-369-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(TRV33:E,HK)
3-080-369-51 MANUAL, INSTRUCTION (KOREAN) (TRV33:JE,KR)
3-080-369-61 MANUAL, INSTRUCTION (ARABIC) (TRV33:E)
3-080-368-11 MANUAL, INSTRUCTION (ENGLISH/FRENCH)
(TRV33E:AEP,UK,AUS,CH,HK,JE)
3-080-368-21 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(TRV33E:AEP)
3-080-368-31 MANUAL, INSTRUCTION (ITALIAN/GREEK) (TRV33E:AEP)
3-080-368-41 MANUAL, INSTRUCTION (GERMAN/DUTCH)
(TRV33E:AEP)
Make sure that the following accessories are supplied with your camcorder.
Power cord (Main lead)(1)
(AUS model)
0 1-696-819-21
Power cord (Main lead)(1)
(AEP, E, EE, NE model)
0 1-769-608-11
Power cord (Main lead)(1)
(CH model)
0 1-782-476-11
Power cord (Main lead)(1)
(UK, HK model)
0 1-783-374-11
Power cord (Main lead)(1)
(US, CND model)
0 1-790-107-22
Power cord (Main lead)(1)
(JE model)
0 1-790-732-11
Power cord (Main lead)(1)
(KR model)
0 1-776-985-11
AC power adaptor (1) (AC-L15A)
(US,CND,AEP,UK,EE,NE,E,
AUS,HK,KR,JE model)
0 1-477-533-31
AC power adaptor (1) (AC-L15B)
(CH model)
0 1-477-533-41
R6 (size AA) batteries
for the Remote
Commander (2)
(not supplied)
21-pin adaptor (1)
(AEP, UK, EE, NE
model)
1-770-783-21
Shoulder strap (1)
3-987-015-01
A/V connecting cable
(1.5m) (1)
1-824-097-11
NP-FM30 battery
pack (1)
(not supplied)
Wireless Remote Commander (1)
(RMT-814E)
1-475-141-61
CD-ROM
(SPVD-008 USB Driver) (1)
(AEP, UK, EE, NE, E, HK, AUS,
JE, KR, CH model)
3-078-942-01
CD-ROM
(SPVD-008(I) USB Driver) (1)
(US,CND model)
3-078-943-01
2-pin conversion adaptor (1)
(TRV33:JE/TRV33E:JE
only)
1-569-007-12
2-pin conversion adaptor (1)
(TRV33:E,HK/TRV33E:E,HK
only)
1-569-008-12
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Lens cap (1)
X-3953-088-1
Lid Battery
Case
(3-742-854-01)
Shoe cover (1)
3-080-571-01
"Memory Stick" (1)
(MSA-8A)
A-7024-735-A
Cleaning cloth (1)
3-073-861-01
USB cable (1)
1-823-931-11
· Abbreviation
CND : Canadian model
EE
: East European model
NE
: North European model
HK
: Hong Kong model
AUS : Australian model
CH
: Chinese model
JE
: Tourist model
KR
: Korea model
3-080-368-51 MANUAL, INSTRUCTION (SWEDISH/RUSSIAN)
(TRV33E:NE,E,JE)
3-080-368-61 MANUAL, INSTRUCTION (DANISH/FINNISH)
(TRV33E:NE)
3-080-368-71 MANUAL, INSTRUCTION (ARABIC/PERSIAN)
(TRV33E:E)
3-080-368-81 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(TRV33E:HK)
3-080-368-91 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE)
(TRV33E:E,CH,JE)


background image
-- 4 --
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
· Keep the temperature of the soldering iron around 270°C
during repairing.
· Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
· Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
DCR-TRV33/TRV33E
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.


background image
-- 5 --
DCR-TRV33/TRV33E
1.
SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder, or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2.
SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen consists of an alphabet and 4-digit number,
which blinks at 3.2Hz. This 5-character display indicates the
"repaired by:", "block" in which the problem occurred, and "detailed
code" of the problem.
1 1
3 1
C
Repaired by:
Refer to page 6.
Self-diagnosis Code Table.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
SELF-DIAGNOSIS FUNCTION
COVER
COVER
Note: The "self-diagnosis display" data will be kept even if the lithium battery (BT5201 of CK-129 board) is removed.