DCR-HC1000
US Model
Canadian Model
Korea Model
Japanese Model
DCR-HC1000E
AEP Model
UK Model
East European Model
Australian Model
Chinese Model
DCR-HC1000/
HC1000E
E Model
Tourist Model
SERVICE MANUAL
DIGITAL VIDEO CAMERA RECORDER
· For MECHANISM ADJUSTMENTS, refer to the "DV MECHANICAL ADJUSTMENT MANUAL
Z (Z200) MECHANISM " (EXCEPT J: 9-876-724-11) (J: 9-876-724-01).
· Reference number search on printed wiring boards is available.
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
Ver 1.0 2004. 06
On the DB-017 board and VC-366 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the DB-017 board and VC-366 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the DB-017
board and VC-366 board are not shown.
The following pages are not shown.
Mounted parts location .......................... Pages 4-117 to 4-119
Electrical parts list ................................ Pages 5-25 to 5-36
Photo : DCR-HC1000
How to use
Acrobat Reader
How to use
Acrobat Reader
Schematic diagram ............................. Pages 4-37 to 4-78
Printed wiring board ............................ Pages 4-107 to 4-114
Sony EMCS Co.
2004F1600-1
©2004.6
Published by DI Technical Support Section
9-876-752-31
DCR-HC1000/HC1000E
DCR-HC1000/HC1000E
RMT-831
Z (Z200) MECHANISM
-- 2 --
DCR-HC1000/HC1000E
SPECIFICATIONS
ENGLISH
JAPANESE
ENGLISH
JAPANESE
System
Video recording system
2 rotary heads, Helical scanning system
Still image recording system
Exif Ver. 2.2 *1
*1 "Exif" is a file format for still images,
established by the JEITA (Japan Electronics
and Information Technology Industries
Association). Files in this format can have
additional information such as your
camcorder's setting information at the time of
recording.
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kH z, stereo 1,
stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
Usable cassette
Mini DV cassette with the
mark
printed
Tape speed
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time (using a DVM60
cassette)
SP: 60 min
LP: 90 min
Fast forward/rewind time (using a DVM60
cassette)
Approx. 2 min 40 s
Viewfinder
Electric viewfinder (color)
Image device
3.8 mm (1/4.7 type) 3CCD (Charge Coupled
Device)
Gross: Approx. 1 070 000 pixels
Effective (still): Approx. 1 000 000 pixels
Effective (movie): Approx. 690 000 pixels
Lens
Carl Zeiss Vario-Sonnar T*
Combined power zoom lens
Filter diameter: 37 mm (1 1/2 in.)
12
× (Optical), 150 × (Digital)
F = 1.6 ~ 2.8
Focal length
3.6 - 43.2 mm (5/32 - 1 3/4 in.)
When converted to a 35 mm still camera
In CAMERA-TAPE:
49 - 588 mm (1 15/16 - 23 1/4 in.)
In CAMERA-MEMORY:
41 - 492 mm (1 5/8 - 19 3/8 in.)
Color temperature
[AUTO], [ONE PUSH], [INDOOR] (3 200
K), [OUTDOOR] (5 800 K)
Minimum illumination
5 1x (lux) (F 1.6)
Input/Output connectors
Audio/Video input/output
10-pin connector
Input/output auto switch
Video signal: 1 Vp-p, 75
(ohms), unbalanced
Luminance signal: 1 Vp-p, 75
(ohms),
unbalanced
Audio signal: 327 mV (at output impedance
more than 47 k
(kilohms)), Input impedance
more than 47 k
(kilohms), Output impedance
with less than 2.2 k
(kilohms)
DV input/output
4-pin connector
LANC jack
Stereo mini-minijack (
2.5 mm)
USB jack
mini-B
MIC jack (FRONT/REAR)
Minijack, 0.388 mV low impedance with DC
2.5 to 3.0 V, output impedance 6.8 k
(kilohms) (
3.5 mm), Stereo type
LCD screen
Picture
6.2 cm (2.5 type)
Total dot number
211 200 (960 22 0)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption (when using the
battery pack)
During camera recording using the viewfinder
4.6 W
During camera recording using the LCD
5.1 W
AC Adaptor AC-L25A/L25B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V, 1.5 A
Operating temperature
0
° C to 40° C (32° F to 104° F)
Storage temperature
20
° C to +60° C (4° F to +140° F)
Dimensions (approx.)
56
× 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.)
(w/h/d) excluding the projecting parts
Mass (approx.)
190 g (6.7 oz) excluding the power cord
Rechargeable battery pack (NP-FF71)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
11.2 Wh (1 560 mAh)
Dimensions (approx.)
40.8
× 24.1 × 49.1 mm
(1 5/8
× 31/32 × 1 15/16 in.) (w/h/d)
Mass (approx.)
90 g (3.2 oz)
Operating temperature
0
° C to 40° C (32° F to 104° F)
Type
Lithium ion
Design and specifications are subject to change
without notice.
PAL color, CCIR standards
NTSC color,
DCR-HC1000:
DCR-HC1000E:
EIA standards
Chrominance signal: 0.3 Vp-p, 75
(ohms),
unbalanced
DCR-HC1000:
DCR-HC1000E:
Chrominance signal: 0.286 Vp-p, 75
(ohms), unbalanced
DCR-HC1000:
During camera recording using the viewfinder
4.3 W
During camera recording using the LCD
4.8 W
Operating temperature
0
° C to 40° C (32° F to 104° F)
Storage temperature
20
° C to +60° C (4° F to +140° F)
Dimensions (approx.)
101
× 78 × 158 mm (4 × 31/8 × 61/4 in.)
(w/h/d)
Mass (approx.)
780 g (1 lb 11 oz) main unit only
890 g (1 lb 15 oz) including the NP-FF71
rechargeable battery pack, DVM60 cassette
and lens cap.
Supplied accessories
See page 5-17.
DCR-HC1000E:
-- 3 --
DCR-HC1000/HC1000E
ENGLISH
JAPANESE
ENGLISH
JAPANESE
5-18
-- 4 --
DCR-HC1000/HC1000E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
· Keep the temperature of the soldering iron around 270°C
during repairing.
· Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
· Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
· Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
· Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
· Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ENGLISH
JAPANESE
ENGLISH
JAPANESE
-- 5 --
DCR-HC1000/HC1000E
ENGLISH
JAPANESE
ENGLISH
JAPANESE