background image
SKP 100
Instruction manual


background image
1
Contents
Contents
Important safety instructions .......................................................................... 2
The SKP 100 G3 plug-on transmitter .............................................................. 3
Areas of application ........................................................................................ 3
The frequency bank system .......................................................................... 3
Delivery includes .................................................................................................. 4
Product overview ................................................................................................. 5
Overview of the SKP 100 G3 plug-on transmitter .................................... 5
Overview of the displays ................................................................................ 5
Putting the plug-on transmitter into operation .......................................... 6
Inserting the batteries/accupack ................................................................. 6
Charging the accupack .................................................................................... 6
Plugging the plug-on transmitter onto a microphone ............................. 6
Using the plug-on transmitter ......................................................................... 7
Switching the plug-on transmitter on/off ................................................. 7
Deactivating the lock mode temporarily .................................................... 8
Muting the audio signal or deactivating the RF signal ............................ 8
Selecting a standard display ......................................................................... 9
Using the operating menu ............................................................................. 10
The buttons .................................................................................................... 10
Overview of the operating menu ............................................................... 10
Working with the operating menu .......................................................... 11
Adjusting settings via the operating menu ............................................... 13
The main menu "Menu" .............................................................................. 13
The extended menu "Advanced Menu" ................................................... 15
Synchronizing the plug-on transmitter with a receiver .......................... 17
Synchronizing the plug-on transmitter with the receiver ­
individual operation ..................................................................................... 17
Synchronizing plug-on transmitters with receivers ­
multi-channel operation .............................................................................. 17
Cleaning the plug-on transmitter ................................................................. 18
Recommendations and tips ........................................................................... 18
If a problem occurs ... ....................................................................................... 19
Accessories ......................................................................................................... 20
Specifications .................................................................................................... 21
Manufacturer Declarations ............................................................................. 22
Index .................................................................................................................... 23
Supplementary
information
can
be
found
on
the
SKP 100 G3
product
page
on
our
website
at
www.sennheiser.com.


background image
2
Important safety instructions
Important safety instructions
· Read this instruction manual.
· Keep this instruction manual. Always include this instruction manual
when passing the product on to third parties.
· Heed all warnings and follow all instructions in this instruction manual.
· Use only a cloth for cleaning the product.
· Do not place the product near any heat sources such as radiators, stoves,
or other devices (including amplifiers) that produce heat.
· Only use attachments/accessories specified by Sennheiser.
· Refer all servicing to qualified service personnel.
Servicing is required if the product has been damaged in any way, liquid
has been spilled, objects have fallen inside, the product has been
exposed to rain or moisture, does not operate properly or has been
dropped.
· WARNING: To reduce the risk of short circuits, do not use the product
near water and do not expose it to rain or moisture.
Replacement parts
When replacement parts are required, be sure the service technician uses
replacement parts specified by Sennheiser or those having the same
characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
Intended use
Intended use of the ew 100 G3 series products includes:
· having read these instructions, especially the chapter "Important safety
instructions",
· using the products within the operating conditions and limitations
described in this instruction manual.
"Improper use" means using the products other than as described in these
instructions, or under operating conditions which differ from those
described herein.


background image
3
The SKP 100 G3 plug-on transmitter
The SKP 100 G3 plug-on transmitter
This plug-on transmitter is part of the evolution wireless series
generation 3 (ew G3). With this series, Sennheiser offers high-quality
state-of-the-art RF transmission systems with a high level of operational
reliability and ease of use. Transmitters and receivers permit wireless
transmission with studio-quality sound.
Features of the evolution wireless 100 G3 series:
· Optimized PLL synthesizer and microprocessor technology
· HDX noise reduction system
·Pilot tone squelch control
· Switching bandwidth of 42 MHz
· Increased immunity to intermodulation and interferences in
multi-channel operation
Areas of application
The plug-on transmitter can be combined with the EK 100 G3 diversity
receiver and the EM 100 G3 stationary receiver. These receivers are
available in the same UHF frequency ranges and are equipped with the
same frequency bank system. This has the advantage that
· a transmission system is ready for immediate use after switch-on,
· several transmission systems can be operated simultaneously on the
preset frequencies without causing intermodulation interference.
The frequency bank system
The plug-on transmitter is available in 6 UHF frequency ranges with 1,680
transmission frequencies per frequency range:
Each frequency range (A­E, G) offers 21 frequency banks with up to 12
channels each:
Each of the channels in the frequency banks "1" to "20" has been factory-
preset to a fixed frequency (frequency preset).
Transmitter
Combinable with ... Receivers
SKP 100 G3
all dynamic
microphones
We recommend
using dynamic
Sennheiser
microphones
EK 100 G3 diversity receiver
EM 100 G3 stationary receiver
condenser
microphones that
are not phantom-
powered, e.g.
the Sennheiser
K6 system
533.875
EM 100
20.12
PEAK
MUTE
P
-10
0
40
25
10 -20
-30
AF
RF
MHz
516 ­ 558
566 ­ 608
626 ­ 668
734 ­ 776
780 ­ 822
823 ­ 865
Range A:
Range G:
Range B:
Range C:
Range D:
Range E:
Frequency bank
1 ... 20
Frequency bank
U
Channel
12 ­ frequency preset
Channel
1 ­ frequency preset
Channel
2 ­ frequency preset
Channel
12 ­ freely selectable frequency
Channel
1 ­ freely selectable frequency
Channel
2 ­ freely selectable frequency


background image
4
Delivery includes
The
factory-preset
frequencies
within
one
frequency
bank
are
intermodulation-free. These frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied
frequency information sheet. Updated versions of the frequency
information sheet can be downloaded from the SKP 100 G3 product page
on our website at www.sennheiser.com.
The frequency bank "U" allows you to freely select and store transmission
frequencies. It might be that these transmission frequencies are not
intermodulation-free.
Delivery includes
The packaging contains the following items:
1 SKP 100 G3 plug-on transmitter
2 AA size batteries, 1.5 V
1 instruction manual
1 frequency information sheet
1 RF power information sheet