background image
SYSTEM 2013 PLL
GEBRAUCHSANLEITUNG
INSTRUCTIONS FOR USE
INSTRUCTIONS POUR L`USAGE
ISTRUZIONI PER L`USO
MODO DE EMPLEO
GEBRUIKSAANWIJZING
BRUKSANVISNING


background image
EK 2013 PLL
1
2.1
BUILT-IN
MICROPHONE
INTERCHANGEABLE
STANDARD OR
RECHARGEABLE
BATTERY PACK
CHANNEL
SELECTOR SWITCH
FOR UP TO 16
FREELY-SELECTABLE
FREQUENCIES
RECEPTION AND
BATTERY INDICATOR LAMP
CHARGING CONTACT FOR CHARGING
IN CHARGING UNIT L 2013 (ONLY ON
RECHARGEABLE BATTERY PACK)
OUTPUT JACK
FOR CONNECTION
TO HEARING AID
TRANSMISSION
INDICATOR LAMP
LOCKABLE
COVER
HEADPHONE
OUTPUT JACK


background image
SK 2013 PLL
Input
BATTERY INDICATOR LAMP
2.2
LOCKABLE
COVER
CHANNEL
SELECTOR SWITCH
FOR UP TO 16
FREELY-SELECTABLE
FREQUENCIES
INTERCHANGEABLE
STANDARD OR
RECHARGEABLE
BATTERY PACK
BUILT-IN
MICROPHONE
CONNECTION FOR
ADDITIONAL DEVICES,
E.G. CASSETTE
RECORDER
CHARGING CONTACT FOR CHARGING
IN CHARGING UNIT L 2013 (ONLY ON
RECHARGEABLE BATTERY PACK)
CONNECTION
FOR ADDITIONAL
MICROPHONE
MKE 2013


background image
2.3
System description
2.4
Units
2.4
Operating principle
2.5
Common characteristics
2.6
Initial operation
2.6
Inserting battery pack
2.6
Operation with rechargeable batteries
2.6
Switching on / Securing on clothing
2.6
List of available transmission/reception ranges
2.7
Frequency selection
2.7
Setting channels on transmitter and receiver
Receiver EK 2013 PLL
2.8
Connection possibilities on receiver
2.8
Integrated antenna
2.8
Operation on hearing aid with audio input
2.8
Operation on hearing aid without audio input
2.8
Operation with headphones
2.9
Lockable cover
2.9
Automatic fade-in and microphone adjustment on receiver
2.10
Setting automatic fade-in
2.10
Switching automatic fade-in and built-in microphone on/off
2.11
Indicator lamps on receiver EK 2013 PLL
2.11
Automatic fade-in, green LED
2.11
Squelch and battery check, red LED
Transmitter SK 2013 PLL
2.12
Connection possibilities
2.12
Indicator lamps
2.13
Setting microphone sensitivity
2.10
Accessories
2.14
Cables
2.15
Technical data - SK 2013 PLL
2.16
Technical data - EK 2013 PLL


background image
2.4
The System 2013 PLL enables the successful integration of people with hearing problems
in schools and universities, at the workplace and during leisure activities.
The design and control details have been optimally adapted to this target group.
Operation is simple and easy to learn. The units are small, light-weight and inconspicuous.
Units
·
Transmitter SK 2013 PLL for the speaker
·
Receiver EK 2013 PLL for the hearing impaired
Operating principle
The speaker, e.g. the instructor, wears the Transmitter SK 2013 PLL. The hearing
impaired person wears the Receiver EK 2013 PLL. Headphones or a connecting cable to
hearing aids can be connected to the EK 2013 PLL. The student can now hear the
instructor as if he/she were sitting directly next to him/her - without wires and with
retained freedom of movement. For the time during which the instructor speaks, the
surrounding noises are considerably reduced. If the instructor is not speaking, the hearing
aid or the microphone built into the EK 2013 PLL is completely effective; now fellow
students can be heard. Yet the dialogue between the instructor and the student is always
given priority.
The System 2013 PLL also remains a dependable aid under difficult conditions. The
transmitting output reaches over great distances. Loud secondary noises and poor room
acoustics can be faded out with the use of the additional microphone MKE 2013 on the
Transmitter SK 2013 PLL. The wide range of accessories allows connection of the
receiver to nearly any type of hearing aid; the connection to the hearing aid can be either
electrical or inductive.
System 2013