background image
Cat. No. 000762
MD 441 U
Microphones | Dynamic Microphone
General Description
The MD 441 U is a microphone of exceptional quality: its acoustic proper-
ties come as close as possible to those of a condenser microphone. Accu-
rate signal response and low distortion are ensured, even with the high-
est sound pressure levels. Surface: all metal body with black leatherette
finish, sound inlet basket: nickel plated.
Features
j Excellent feedback rejection
j Excellent sound quality
j Spring capsule mounting provides low sensitivity to handling noise
j Hum compensating coil
j Five position bass roll-off switch
j Brilliance (treble boost) switch
j Integral pop filter
j Delivery includes: 1 MD 441 U
1 microphone clamp MZA 441
Recommended Accessories
j MZT 100 table stand
Cat. No. 001883
j MZT 441 table stand
Cat. No. 000799
j MZT 14 mounting bolt
Cat. No. 001895
j MZW 40 foam windshield
Cat. No. 001794
j MZW 441 foam windshield
Cat. No. 000976
Technical Data
Pick-up pattern ...........................................................super-cardioid
Frequency response ................................................. 30 ­ 20,000 Hz
Sensitivity (free field, no load, 1 kHz).............. 1.8 mV/Pa ± 2 dB
Nominal impedance ................................................................. 200
Min. terminating impedance ..................................................... 1 k
Dimensions ...........................................................270 x 33 x 36 mm
Weight ...........................................................................approx. 450 g
Cable pictured is an accessory not supplied with the microphone
Profile
Super-cardioid studio microphone, hum compensating coil,
five position bass control, brilliance switch, integral pop filter,
frequency response 30 ­ 20,000 Hz, sensitivity (free field, no
load) 1.8 mV/Pa ± 2 dB at 1 kHz, nominal impedance 200
,
min. terminating impedance 1 k
, dimensions 270 x 33 x 36 mm,
weight approx. 450 g.
Switch set to "brilliance"
Dip resulting from bass control