background image
S_LX70W_En.book 1


background image
D3-4-2-1-1_En-A
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
Thank you for buying this PIONEER product. Please read
through these operating instructions so you will know
how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power
plug and power outlet may sometimes differ from that
shown in the explanatory drawings. However, the
method of connecting and operating the unit is the same.
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filled
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture.
D3-4-2-1-3_A_En
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment.
D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 25 cm at top, 15 cm at rear, and
10 cm at each side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
WARNING
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the rear panel.
D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
WARNING:
Do not climb or sit on this unit. Be especially
careful when children are around. The unit may be
damaged, or may fall over causing injury.
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-1a_A_En
CAUTION
The POWER switch on this unit will not completely
shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for
the unit, you will need to unplug it from the AC outlet
to shut down all power. Therefore, make sure the
unit has been installed so that the power cord can
be easily unplugged from the AC outlet in case of an
accident. To avoid fire hazard, the power cord should
also be unplugged from the AC outlet when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-2a_A_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c_A_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002_En
S_LX70W_En.book 2


background image
[Not applicable to the Taiwanese model]
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
D3-4-2-1-2-2_B_En
IMPORTANT: THE MOULDED PLUG
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Should
the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug
must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.
If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of
safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows ;
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter
N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter
L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
S_LX70W_En.book 3


background image
4
En
CONTENTS
ACCESSORY ITEMS ............................ 4
FEATURES .......................................... 4
IN COMBINATION WITH
SPEAKERS .......................................... 4
INSTALLATION................................... 5
Speaker Installation ............................ 5
Installation Precautions ..................... 5
PANEL FACILITIES .............................. 6
FRONT PANEL..................................... 6
REAR PANEL....................................... 6
CONNECTIONS................................... 7
LINE LEVEL CONNECTION................. 7
OPERATION ....................................... 7
TROUBLESHOOTING ......................... 8
SPECIFICATIONS ................................ 8
ACCESSORY ITEMS
RCA plug cord x 1
Power cable x 1
Polishing cloth x 1
Warranty card x 1
Operating instructions
FEATURES
300 W (RMS) power with D class amplifier that serves
audio and video software playback such as Dolby*
Digital with a wide dynamic range.
Equipped with 30 cm driver
Crossover frequency can be set to 50 Hz, 60 Hz, 70 Hz,
80 Hz, 100 Hz, 120 Hz, 160 Hz, 200 Hz.
Equipped with Bass Mode selector (Music/Cinema
mode).
* Maunfactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
IN COMBINATION WITH
SPEAKERS
The frequency characteristics of the S-LX70W combined
with small-size speakers are shown below. As shown in
these figures, the low frequency range is improved.
· These special characteristics are obtained in an
echoless chamber. The effect of an additional S-LX70W
in an ordinary listening room is better than the chart
indicates when positioned adequately.
· With playback of Dolby* Digital, establishment of a
special channel for the subwoofer is recommended;
and with playback of LFE (Low Frequency Effect: sound
effect like the rumbling of the earth, whose purpose is
to intensify the force of the video), the S-LX70W is
especially effective.
Dolby* Digital
Dolby Digital is the name of the Dolby Surround multi-
channel digital system that was developed from Dolby
Surround, as a continuation of Dolby Pro Logic Surround.
Dolby Digital is also referred to as a 5.1 channel system.
This is because it has 5 channels in the 20 Hz to 20 kHz
frequency range (front left and right, center, and rear left
and right) and an independent channel for the
subwoofer. The subwoofer channel is also referred to as
LFE (Low Frequency Effect).
The LFE channel is used according to individual tastes to
enhance the bass effect.
Small-size speakers + S-LX70W
Small-size speaker
FREQUENCY (Hz)
RESPONCE
(dB)
S_LX70W_En.book 4


background image
5
En
INSTALLATION
Speaker Installation
· Subwoofer Installation Criteria
1 Left speaker
2 Right speaker
3 Recommended installation range for the
subwoofer
4 Listening position
The subwoofer plays back the bass in monaural, making
use of the fact that the human ear is not very sensitive to
the direction of low-pitched sound. Because of this, the
subwoofer can be installed almost anywhere. If it is
installed too far away, however, the sound from the other
speakers may become unnatural.
· An example of speaker positioning
1 Front left speaker
2 Center speaker
3 Front right speaker
4 Subwoofer
5 Listening area
6 Rear left speaker
7 Rear right speaker
NOTES:
· To avoid interference with the picture on a nearby TV
set, use magnetically shielded speaker systems. This
is particularly important for the center speaker since it
is usually located closest to the TV.
· Position the left and right channel speakers at equal
distances from the TV set and approximately 1.8 meters
from each other.
· Install the center speaker above or below the TV so that
the sound of the center channel is localized at the TV
screen.
· The rear (surround) speakers are most effective when
installed in parallel locations directly to the side, or
slightly behind, the listener, at a level about 1 meter
above the listener's ears.
Installation Precautions
· Install the unit in a well-ventilated location where it will
not be exposed to high temperatures and high
humidity.
· Do not place the unit near stoves or other heating
equipment or at locations exposed to direct sunlight,
as these can have an adverse effect on the cabinet and
internal components. Also, do not install the unit
where there is too much dust or high humidity, as
these can cause malfunctioning or breakdowns.
(Avoid cooking tables and other locations where the
unit would be exposed to heat, steam and soot.)
· Do not place heavy or large objects on top of the
speaker. Doing so could provoke the speaker to fall,
causing damages or bodily injury. If speakers fall from
their installation locations, they may suffer irreparable
cracks in their finish.
· Keep the unit away from devices such as cassette
decks which are sensitive to magnetic fields.
· Do not place the speaker on an unstable surface, as
doing so may cause the speaker to fall and cause
damage or bodily injury.
· Do not place cups, glasses, or other containers with
fluids on top of the units, since the units may be
damaged if the liquid spills.
3
4
12
1
4
2
3
67
5
CAUTION:
When installing the center speaker on top of the TV,
be sure to secure it with tape or some other suitable
means.
Otherwise, the speaker may fall from the TV due to
external shocks such as earthquakes, and it may lead
to endangering those nearby or damaging the
speaker.
This speaker system is magnetically shielded.
However, depending on the installation location,
color distortion may occur if the speaker system is
installed extremely close to the screen of a television
set.
If this happens, turn off the power switch of the
television set, and turn it on after 15 to 30 minutes.
If the problem persists, place the speaker system
away from the television set.
S_LX70W_En.book 5