PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
T ZZM MAY. 2004 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cloth grille is attached to the front baffle by plastic catchers.
Detach the grille by pulling it toward you.
Woofers are attached to the baffle board by 8 internal screws
(rear side). To detach them, unfasten those screws.
Both tweeter and network assembly are attached to the baffle
board by 2 internal screws. To detach them, unfasten those
When attaching the network assembly, attach the network cable
to the baffle board by applying adhesive (6 points).
The cabinet is attached to the baffle board by 8 external screws.
To detach it, unfasten those screws.
This service manual is intended for qualified service technicians; it is not meant
for the casual do-it-yourselfer. Qualified technicians have the necessary test
equipment and tools, and have been trained to properly and safely repair complex
products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to perform the
repair of this product properly and safely, you should not risk trying to do so and
refer the repair to a qualified service technician.
This product contains lead in solder and certain electrical parts contain chemicals
which are known to the state of California to cause cancer, birth defects or other
Health & Safety Code Section 25249.6 Proposition 65
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Grille Assy (for Center SP)
Grille Assy (for Rear SP)
Input Terminal (Red)
Input Terminal (Black)
Screw (for Speaker Stand)
Screw (for Nut)
Screw (for Tweeter)
Screw (for Cabinet)
Screw (for Woofer)
NETWORK ASSY (FRWN-180)
Speaker Stand Assy
Hung On Wl.Unit Assy
Polyethylene Bag S2