PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2003
PFS-SDC September 2003 Printed in Belgium
FOR PRECAUTION OF REASSEMBLY AND
The cloth grille is attached to the front baffle by plastic
catchers. Detach the grille by pulling it toward you.
Woofers are attached to the baffle board by 8 internal screws
(rear side). To detach them, unfasten those screws.
Both tweeter and network assembly are attached to the baffle
board by 2 internal screws. To detach them, unfasten those
The cabinet is attached to the baffle board by 8 external screws.
To detach it, unfasten those screws.
Even though the suffix is different between /XDCN and /SXTW/EW5,
both models are completely same product.
Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List.
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Aluminium front baffle
Red input terminal
Black input terminal
Grille Assy for Centre Speaker
Grille Assy for Rear Speaker
Screw for Woofer
Screw for Tweeter
Screw for Cabinet
Speaker Stand Assy
Mounting Panel Assy
White Grille for Centre Speaker
White Grille for Rear Speaker
NETWORK ASSY (FRWN-180)