PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
T ZZS SEPT. 2006 Printed in Japan
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
· The grille is attached to the baffle by its bosses and press-
fitting. To detach it, pry it open by inserting a flat blade tool
between the grille and the cabinet. Be careful not to
damage the grille or the cabinet.
· Woofer units are attached together to the baffle by
8 external screws. To detach them, unfasten those screws.
· Tweeter is attached to the baffle by 3 external screws.
To detach it, unfasten those screws.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
2. EXPLODED VIEWS AND PARTS LIST
Input Terminal (Red)
Input Terminal (Black)
(to fasten the stand or security line to cabinet)
(to fasten Hook to cabinet)
(to fasten WF & TW speakers to front panel)
(to fasten front panel to cabinet)
(to fasten top plate or bottom plate to cabinet)
(between security line and cabinet)
Owner's Manual (Chinese)
3. SCHEMATIC DIAGRAM
PACKING Parts List
There is no drawing
Network Assy (SWN6018)
SPEAKER SYSTM Parts List