background image
ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
PIONEER ELECTRONIC CORPORATION 1998
RRV2018
T-ZZW SEPT. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cosmetic baffle assy is attached to the cabinet by 4 external
screws. To detach the cosmetic baffle assy, loosen these
screws. Then carefully disconnect the wires of the woofer,
mid-range and tweeter mounted on the cosmetic baffle assy. To
attach the cosmetic baffle assy, replace it on the cabinet cor-
rectly and secure with 4 screws.
The woofer is attached to the cosmetic baffle assy together with
the woofer ring assy by 4 internal screws. To detach the woofer
(woofer ring assy), loosen these screws. To attach the woofer
ring assy, fit the boss of the woofer ring to the hollow of the
cosmetic baffle assy. To attach the woofer, face its terminal up-
ward, and fit the boss of the cosmetic baffle to the hollow of the
flame. To attach the woofer ring assy and the woofer, replace it
on the cosmetic baffle assy correctly and secure with 4 screws.
SPEAKER SYSTEM
S-A880V
XJI/E
S-A880V XJI/NC
This product is component of system.
For the operating instructions, refer to the service manual RRV2008 for XR-A880.
The mid-range is attached to the cosmetic baffle by 3 internal
screws. To detach it, unfasten those screws. When attaching it,
face its terminal downward.
The tweeter is attached to the cosmetic baffle by 2 internal
screws. To detach it, unfasten those screws. When attaching it,
face its terminal downward.
The network assy is connected to the input terminal. To detach
the network assy, disconnect the wire from the input terminal.
To attach the network assy connect the wire of the network
assy to the input terminal correctly.


background image
2
NSP
Cabinet
SMM1808
Network ASSY
SWN1586
Input Terminal
KKX1014
Non Skid Pad
SEC1374
Gasket (for width)
SEC1359
Gasket (for height)
SEC1390
NSP
Acoustic Absorbent
SMV1886
Woofer Ring ASSY
SXB1323
NSP
Woofer Ring
SNK2293
NSP
Cosmetic Ring ASSY
SXB1324
NSP
Punching Net
SNC1160
NSP
Cosmetic Ring
SNK2292
Baffle ASSY (L)
SXB1331
NSP
Punching Net (L)
SNC1163
NSP
Cosmetic Baffle (L)
SNK2309
NSP
Duct
SNK2311
Baffle ASSY (R)
SXB1332
NSP
Punching Net (R)
SNC1164
NSP
Cosmetic Baffle (R)
SNK2310
NSP
Duct
SNK2311
Mark No.
Description
Part No.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
S-A880V
( XJI/E Type )
NSP
Stamped Model Label (L)
SME2772
NSP
Model Label (L)
SAN2571
NSP
Stamped Model Label (R)
SME2773
NSP
Model Label (R)
SAN2572
( XJI/NC Type )
NSP
Stamped Model Label (L)
SME2832
NSP
Model Label (L)
SAN2605
NSP
Stamped Model Label (R)
SME2833
NSP
Model Label (R)
SAN2606
Speaker (Woofer)
P16EN79-51F
Speaker (Mid-range)
FD87CC50-51F
Speaker (Tweeter)
E52AP39-55F
Screw (for Tweeter)
BPZ30P080FMC
Screw (for Mid-range)
BPZ40P100FMC
Screw (for Woofer Ring ASSY)
BPZ40P300FMC
Tapping Screw (for Baffle)
SBA1162
Speaker Wire
SDS1057
Top Protector
SHA2116
Bottom Protector
SHA2117
NSP
Polyethylene Bag S5
SHL1212
Packing Case ( XJI/E Type)
SHG2101
Packing Case ( XJI/NC Type)
SHG2142
SCHEMATIC DIAGRAM
For Packing
Network ASSY (SWN1586)
Woofer
Mid-range
I N
Red
Green
White
Blue
White
White
Tweeter
1.0
µF
4.7
µF
Blue
White