background image
ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
ARP3377
T ­ ZZY JULY 2006 Printed in Japan
PDP-R06XE
MEDIA RECEIVER
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
Power Requirement
Serial No. (Please comfirm the figures)
PDP-R06XE
WYVIXK51
AC220 to 240V
PDP-R06FE
WYVI51
AC220 to 240V
&&&&500000&&
PDP-R06FE
WYVIXK51
AC220 to 240V
¶ This service manual should be used together with the following manual(s):
Model No.
Order No.
Remarks
PDP-R06XE/WYVIXK5
ARP3275
SAFETY INFORMATION, EXPLODED VIEWS AND PARTS LIST, BLOCK DIAGRAM,
PCB PARTS LIST, ADJUSTMENT, IC INFORMATION etc.
ARP3276
SCHEMATIC DIAGRAM and PCB CONNECTION DIAGRAM
Narrow pitch connectors on that model are changed due to change of connector material.
Therefore there is no interchangeable to original parts.
Using incorrect parts to this model will cause some malfunction by Whisker.
PDP-R06FE


background image
2
A
B
C
D
1
23
4
12
3
4
PDP-R06XE
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to
mark on product are used for disassembly.
Reference Nos. indicate the pages and Nos. in the service manual for the base model.
NOTES:
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
561
473
R50
1R0
5621
560
47k
0.5
1
RD1/4PU
J
RD1/4PU
J
RN2H
K
RS1P
K
56 x 101
47 x 103
R50
1R0
561
473
5.62k
RN1/4PC
F
562 x 101
5621
PDP-R06XE/WYVIXK51 and PDP-R06XE/WYVIXK5 are constructed the same except for the following :
PCB ASSEMBLIES
P11 - 1
R06 D-TUNER Assy
AWE1304
Not used
P11 - 1
R06 DT Assy
Not used
AWE1308
P11 - 2
MR MAIN Assy
AWV2219
AWV2336
NSP
1..MR FUKUGO Assy
AWV2220
AWV2337
P11 - 5
2..FRONT ASSY
AWW1038
AWW1170
CHASSIS SECTION (1)
P11 - 9
Flexible Cable (J201)
ADD1305
ADD1416
P11 - 10
Flexible Cable (J202)
ADD1306
ADD1417
P11 - 11
Flexible Cable (J205)
ADD1307
ADD1418
CONTRAST TABLE
Part No.
PDP-R06XE
WYVIXK5
Ref. No.
Symbol and Description
Remarks
Mark
PDP-R06XE
WYVIXK51
1. CONTRAST OF MISCELLANEOUS PARTS
CONTRAST OF PCB ASSEMBLIES
· R06 D-T ASSY
AWE1308 and AWE1304 are constructed the same except for the following :
Mark
Symbol and Description
Part No.
AWE1304
AWE1308
Remarks
[AV BLOCK]
CN4000
AKM1217
AKM1348
[POWER BLOCK]
R6206, R6209
RS1/16S0R0J
Not used
R6207, R6208
Not used
RS1/16S0R0J
CN6003
AKM1236
AKM1349
· MR MAIN ASSY
Mark
Symbol and Description
Part No.
AWV2219
AWV2336
Remarks
[BOARD IF BLOCK]
CN4001
AKM1236
AKM1349
CN4004
AKM1201
AKM1353
CN4005
AKM1303
AKM1354
AWV2336 and AWV2219 are constructed the same except for the following :
Note : For PCB ASSEMBLIES, Refer to " CONTRAST OF PCB ASSEMBLIES ".
· FRONT ASSY
Mark
Symbol and Description
Part No.
AWW1038
AWW1170
Remarks
CN7804
AKM1236
AKM1349
AWW1170 and AWW1038 are constructed the same except for the following :


background image
3
A
B
C
D
5
67
8
5
6
7
8
PDP-R06XE
PDP-R06FE/WYVI51 and PDP-R06FE/WYVI5 are constructed the same except for the following :
PCB ASSEMBLIES
P11 - 2
MR MAIN Assy
AWV2221
AWV2338
NSP
1..MR FUKUGO Assy
AWV2222
AWV2339
P11 - 5
2..FRONT ASSY
AWW1042
AWW1171
CHASSIS SECTION (1)
P11 - 9
Flexible Cable (J201)
ADD1305
ADD1416
CONTRAST TABLE
Part No.
PDP-R06FE
WYVI5
Ref. No.
Symbol and Description
Remarks
Mark
PDP-R06FE
WYVI51
Note : For PCB ASSEMBLIES, Refer to " CONTRAST OF PCB ASSEMBLIES ".
PDP-R06FE/WYVIXK51 and PDP-R06FE/WYVIXK5 are constructed the same except for the following :
PCB ASSEMBLIES
P11 - 2
MR MAIN Assy
AWV2221
AWV2338
NSP
1..MR FUKUGO Assy
AWV2222
AWV2339
P11 - 5
2..FRONT ASSY
AWW1042
AWW1171
CHASSIS SECTION (1)
P11 - 9
Flexible Cable (J201)
ADD1305
ADD1416
CONTRAST TABLE
Part No.
PDP-R06FE
WYVIXK5
Ref. No.
Symbol and Description
Remarks
Mark
PDP-R06FE
WYVIXK51
Note : For PCB ASSEMBLIES, Refer to " CONTRAST OF PCB ASSEMBLIES ".
· MR MAIN ASSY
Mark
Symbol and Description
Part No.
AWV2221
AWV2338
Remarks
[BOARD IF BLOCK]
CN4001
AKM1236
AKM1349
AWV2338 and AWV2221 are constructed the same except for the following :
· FRONT ASSY
Mark
Symbol and Description
Part No.
AWW1042
AWW1171
Remarks
CN7804
AKM1236
AKM1349
AWW1171 and AWW1042 are constructed the same except for the following :
CONTRAST OF PCB ASSEMBLIES


background image
ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
PDP-R06XE
ARP3275
MEDIA RECEIVER
PDP-R06XE
PDP-R06FE
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
This service manual should be used together with the following manual(s).
Model
Type
Power Requirement
Remarks
PDP-R06XE
WYVIXK5
AC220-240V
PDP-R06FE
WYVI5
AC220-240V
PDP-R06FE
WYVIXK5
AC220-240V
Model No.
Order No.
Remarks
PDP-R06XE, PDP-R06FE
ARP3276
SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM
For details, refer to "Important Check Points for good servicing".
T-IZR AUG. 2005 printed in Japan


background image
PDP-R06XE
2
12
34
12
3
4
C
D
F
A
B
E
SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools,and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty If you are not qualified to perform the repair of this product properly and safely you
.
,
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains and cer tain electrical par ts contain chemicals which are known to the state of California to cause cancer,
bir th defects or other reproductive harm.
This product contains mercury. Disposal of this material may be regulated due to evironmental considerations. For disposal or
recycling information, please contact your local authoritier of the Electronice Industries Alliance : www.eiae.org.
Health & Safety CodeSection 25249.6 ­ Proposition 65
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols
(fast operating fuse)
and/or
(slow operating fuse) on PCB indicate that replacement
parts must be of identical designation.
REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible
(fusible de type rapide)
et/ou
(fusible de type lent) sur CCI indiquent que
les pièces de remplacement doivent avoir la même désignation.
ANY MEASUREMENTS NOT WITHIN THE
LIMITS OUTLINED ABOVE ARE INDICATIVE
OF A POTENTIAL SHOCK HAZARD AND
MUST BE CORRECTED BEFORE RETURN-
ING THE APPLIANCE TO THE CUSTOMER.
2. PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in the appliance
have special safety related character istics. These are
often not evident
from visual
inspection nor the
protection afforded by them necessarily can be obtained
by using replacement components rated for voltage,
wattage, etc. Replacement par ts which have these
special safety character istics are identified in this
Service Manual.
Electr ical components having such features are
identified by marking with a
on the schematics and
on the parts list in this Service Manual.
The use of a substitute replacement component which
does not have the same safety characteristics as the
PIONEER recommended replacement one, shown in the
parts list in this Service Manual, may create shock, fire,
or other hazards.
Product Safety is continuously under review and new
instructions are issued from time to time. For the latest
infor mation, always consult the current PIONEER
Ser vice Manual. A subscription to, or
additional copies
of, PIONEER Ser vice Manual may be obtained at a
nominal charge from PIONEER.
(FOR USA MODEL ONLY)
1. SAFETY PRECAUTIONS
The following check should be perfor med for the
continued protection of the customer and ser vice
technician.
LEAKAGE CURRENT CHECK
Measure leakage current to a known ear th ground
(water pipe, conduit, etc.) by connecting a leakage
current tester such as Simpson Model 229-2 or
equivalent between the ear th ground and all exposed
metal par ts of the appliance (input/output ter minals,
screwheads, metal overlays, control shaft, etc.). Plug
the AC line cord of the appliance directly into a 120V
AC 60 Hz outlet and turn the AC power switch on. Any
current measured must not exceed 0.5 mA.
Device
under
test
Leakage
current
tester
Earth
ground
Reading should
not be above
0.5 mA
Also test with
plug reversed
(Using AC adapter
plug as required)
Test all
exposed metal
surfaces
AC Leakage Test