background image
'
Operating Instructions
Manual de instrucciones
COMPACT DISC PLAYER
REPRODUCTOR DE COMPACTOS
PD-217
PD-117


background image
2
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings.
However, the method of
connecting and operating the unit is the same.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
IMPORTANT
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
D3-4-2-1-1_En
WARNING: The apparatus is not waterproofs, to
prevent fire or shocks hazard, do not expose this
apparatus to rain or moisture and do not put any
water source near this apparatus, such as vase,
flower pot, cosmetics container and medicine
bottle etc.
D3-4-2-1-3_En
CAUTION
This product contains a laser diode of higher class
than 1. To ensure continued safety, do not remove any
covers or attempt to gain access to the inside of the
product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
CLASS 1
LASER PRODUCT
D3-4-2-1-8_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002_En
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and
televisions, use shielded cables and connectors for connections.
D8-10-3a_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. D6-8-2-1_En
The STANDBY/ON switch is secondary connected
and therefore, does not separate the unit from mains
power in STANDBY position. Therefore install the
unit suitable places easy to disconnect the MAINS
plug in case of the accident. The MAINS plug of unit
should be unplugged from the wall socket when left
unused for a long period of time.
D3-4-2-2-2a_En


background image
3
Sp/ChH
Español
English
En
D3-4-2-1-5_En
Voltage selector
You can find the voltage selector switch on the rear
panel of multi-voltage models.
The factory setting for the voltage selector is 220-
240 V. Please set it to the correct voltage for your
country or region.
· For Taiwan, please set to 110-127V before using.
Before changing the voltage, disconnect the AC power
cord. Use a medium size screwdriver to change the
voltage selector switch.
220­240 V
110­127 V
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
­ Reorient or relocate the receiving antenna.
­ Increase the separation between the equipment and receiver.
­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
­ Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_En
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate
the equipment.
D8-10-2_En
En
WARNING:
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230V
or 120V) written on the rear panel.
D3-4-2-1-4_En
WARNING: No naked flame sources, such as
lighted candle, should be placed on the apparatus.
If naked flame sources accidentally fall down, fire
spread over the apparatus then may cause fire.
D3-4-2-1-7a_En
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, to prevent fire hazard, the openings
should never be blocked and covered with items,
such as newspapers, table-cloths, curtains, etc. Also
do not put the apparatus on the thick carpet, bed,
sofa, or fabric having a thick pile.
D3-4-2-1-7b_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install in the following locations
· Location exposed to direct sunlight or strong artificial
light
· Location exposed to high humidity, or poorly
ventilated location
D3-4-2-1-7c_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
warranty period.
K041_En


background image
4
En
El interruptor de encendido/en (STANDBY/ON)
espera está conectado en secundario y por lo tanto
no desconecta al aparato de la red cuando este en la
posicion de espera (STANDBY). Por eso instale el
aparato en lugares apropiados fácil de desconectar
el enchufe de red en caso de accidente. El enchufe
de red del aparato deberia ser desconectado de la
toma cuando non ven usado por un largo período de
tiempo.
D3-4-2-2-2a_Sp
Sp
El punto exclamativo dentro un triángulo
equilátero convenido para avisar el usuário
de la presencia de importantes instruciones
sobre el funcionamento y la manutención
en la libreta que acompaña el aparato.
La luz intermitente com el símbolo de punta
de flecha dentro un triángulo equilátero.
Está convenido para avisar el usuario de la
presencia de "voltaje peligrosa" no aislada
dentro el producto que podría constituir un
peligro de choque eléctrico para las
personas.
IMPORTANTE
ATENCIÓN:
PARA PREVENIR EL PELIGRO DE CHOQUE
ELÉCTRICO NO REMOVER LA TAPA NI LAS
PARTES DENTRO NO UTILIZADAS,
LLAMAR UNA PERSONA CUALIFICADA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
D3-4-2-1-1_Sp
ADVERTENCIA: El aparato no es impermeable.
No poner alguna fuente de agua cerca del aparato,
como vaso de flores, recipientes cosméticos y
medicinales, etc.
D3-4-2-1-3_Sp
PRECAUCIÓN
Este aparato contiene un diodo láser de clase superior
a 1. Para mantener la seguridad apropiada, no saque
ninguna cubierta ni intente acceder al interior del
aparato.
Lleve siempre el aparato a un centro con personal de
servicio técnico cualificado.
En su aparato aparecerá la etiqueta de precaución
siguiente.
Ubicación: Parte posterior del aparato.
CLASS 1
LASER PRODUCT
D3-4-2-1-8_Sp
PRECAUCIONES CONCERNIENTES A LA
MANIPULACIÓN DEL CABLE DE
ALIMENTACIÓN
Tome el cable de alimentación por la clavija. No
extraiga la clavija tirando del cable. Nunca toque el
cable de alimentación cuando sus manos estén
mojadas, ya que esto podría causar cortocircuitos o
descargas eléctricas. No coloque la unidad, algún
mueble, etc., sobre el cable de alimentación. Asegúrese
de no hacer nudos en el cable ni de unirlo a otros
cables. Los cables de alimentación deberán ser
dispuestos de tal forma que la probabilidad de que
sean pisados sea mínima. Una cable de alimentación
dañado podrá causar incendios o descargas eléctricas.
Revise el cable de alimentación está dañado, solicite el
reemplazo del mismo al centro de servicio autorizado
PIONEER más cercano, o a su distribuidor.
S002_Sp
Gracias por la adquisición de este producto Pioneer.
Para saber cómo utilizar correctamente su modelo, lea
cuidadosamente este manual de instrucciones. Después de haber
finalizado su lectura, guárdelo en un lugar seguro para futuras
referencias.
En algunos países o regiones, la forma de la clavija de alimentación
y de la toma de corriente pueden ser diferentes a la indicada en las
ilustraciones explicatorias, sin embargo el método de conexión y
operación de la unidad es idéntico.
ADVERTENCIA:
ANTES DE ENCHUFAR EL APARATO POR LA
PRIMERA VEZ, LEER LA SECCIÓN SIGUIENTE CON
MUCHA ATENCIÓN.
El voltaje de corriente necesaria es diferente de
acordo con el país o la región, sea seguro que el
voltaje donde este aparato será usado encuentra el
voltaje adequado (por ejemplo, 230V o 120V)
escrito en el panel posterior.
D3-4-2-1-4_Sp
ADVERTENCIA: Fuentes de llama descobiertas,
como una vela encendida, no deberían estar sobre
el aparato. Si fuentes de llama accidentalmente
caen, el fuego propagado sobre el aparato puede
causar incendio.
D3-4-2-1-7a_Sp


background image
5
Sp/ChH
Espa
ñ
ol
English
Sp
Voltage selectorSelector de tensión
El selector de tensión está situado en el panel posterior
de los modelos de tensiones múltiples.
El ajuste predeterminado del selector de tensión es
de 220-240 V. Ajústelo a la tensión correcta de su
país o región.
· Para Taiwán, ajústelo a 110-127V antes de
ponerlo en funcionamiento.
Antes de cambiar la tensión, desenchufe el cable de
alimentación de CA. Para cambiar el ajuste del selector
de tensión, emplee un destornillador de tamaño medio.
D3-4-2-1-5_Sp
220­240 V
110­127 V
NOTAS SOBRE LA MANIPULACIÓN ............................................ 5
PRECAUCIONES RELATIVAS AL MANEJO ................................ 10
CONEXIONES .............................................................................. 13
CONFIRMACIÓN DE LOS ACCESORIOS .................................... 17
INSERCIÓN DE LAS PILAS EN EL MANDO A DISTANCIA
(PD-217 SOLAMENTE) ................................................................ 17
NOMBRES Y FUNCIONES DE LOS CONTROLES ...................... 19
FUNCIONAMIENTO BÁSICO ...................................................... 21
DIVERSAS OPERACIONES .......................................................... 23
PARA REPRODUCIR SOLAMENTE LAS
MELODÍAS DESEADOS .............................................................. 27
CONVENIENTE OPERACION DE GRABACION ........................... 31
ESPECIFICACIONES .................................................................... 33
SOLUCIÓN DE PROBLEMAS ...................................................... 35
ÍNDICE
NOTAS SOBRE LA MANIPULACIÓN
El contenido de este manual de instrucciones se basa en el modelo
PD-217, pero puede aplicarse también al modelo PD-117.Conexión
del cable de alimentación de CA y funciones.
Conexión cable de alimentación de CA funciones
Dependiendo de la conexión del cable de alimentación de CA,
algunas funciones no podrán realizarse
Cuando el cable de
alimentación de CA
esté conectado a la
toma
sin
conmutador de un
amplificador
o
tomacorrientes de
la pared
No
Función
Reproducci ó n con
temporizador
Memoria de programa
Memoria de nivel de
salida
(PD-217 solamente)
Cuando el cable de
alimentación de CA
esté conectado a la
toma
con
conmutador de un
amplificador
o
temporizador de
audio.
No
No
Condiciones de Funcionamiento
Temperatura y humedad ambiental durante el
funcionamiento:
+5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); menos de 85 %RH
(aperturas de aireación no obstruidas)
No instalar en los siguientes lugares:
· lugar expuesto a la luz directa del sol o a fuerte luz
artificial
· lugar expuesto a alta humedad, o lugar poco aireado
D3-4-2-1-7c_Sp
Este producto es para tareas domésticas generales.
Cualquiera avería debida a otra utilización que
tareas domésticas (tales como el uso a largo plazo
para motivos de negocios en un restaurante o el uso
en un coche o un barco) y que necesita una
reparación hará que cobrarla incluso durante el
período de garantía.
K041_Sp
ADVERTENCIA: Las rendijas en el aparato es
necesario para la ventilacíon para permitir el
funcionamento del producto y para proteger este
de sobrecalentamiento, para evitar incendio. Las
rendijas no deberían ser nunca cubiertas con
objectos, como periódicos, manteles, tiendas, etc.
Tambiém no poner el aparato sobre alfombra
espesa, cama, sofá o construción de pila espesa.
D3-4-2-1-7b_Sp