background image
Operation Manual
Multi-CD control High power Cassette player with
RDS tuner
KEH-P2030R
KEH-P2033R
English
Deutsch
Español


background image
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit 3
About this manual 3
Precautions 3
In case of trouble 3
Protecting your unit from theft 3
Removing the front panel 3
Attaching the front panel 4
Whats What
Head unit 5
Power ON/OFF
Turning the unit on 7
Selecting a source 7
Turning the unit off 7
Tuner
Listening to the radio 8
Storing and recalling broadcast
frequencies 8
Tuning in strong signals 9
Storing the strongest broadcast
frequencies 9
RDS
Introduction of RDS operation 10
Switching the RDS display 10
Receiving PTY alarm broadcasts 10
Selecting alternative frequencies 10
Using PI Seek 11
Using Auto PI Seek for preset
stations 11
Limiting stations to regional
programming 11
Receiving traffic announcements 11
Responding to the TP alarm 12
PTY list 12
Cassette Player
Playing a tape 13
Radio intercept 13
Multi-CD Player
Playing a CD 14
Changing the display 14
Repeating play 14
Pausing CD playback 15
50-disc multi-CD player 15
Audio Adjustments
Introduction of audio adjustments 16
Using balance adjustment 16
Using the BTB (bass treble booster) 16
Adjusting BTB 17
Adjusting loudness 17
Adjusting source levels 17
Initial Settings
Adjusting initial settings 18
Setting the FM tuning step 18
Switching Auto PI Seek 18
Additional Information
Cassette player 19
Cassette tapes 19
Cleaning the playback head 19
Specifications 20
Contents
En
2


background image
About this unit
This product complies with the EMC Directives
(89/336/EEC, 92/31/EEC) and CE Marking Di-
rective (93/68/EEC).
The tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other
areas may result in improper reception. The
RDS function operates only in areas with FM
stations broadcasting RDS signals.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this productspo-
tential and to maximize your listening enjoy-
ment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this
page and in other sections.
Precautions
! The Pioneer CarStereo-Pass is for use only
in Germany.
! Keep this manual handy as a reference for
operating procedures and precautions.
! Always keep the volume low enough so you
can hear sounds outside of the car.
! Protect this product from moisture.
! If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
! Keep the front panel closed while driving.
Important
! Never use force or grip the display and the
buttons tightly when removing or attaching.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
Before You Start
En
3
English
Section
01
HHHHHHHHHHHHHH


background image
3 Put the front panel into the protective
case provided for safe keeping.
Attaching the front panel
1 Place the front panel flat against the
head unit.
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
En
4
Section
01
HHHHHHHHHHHHHH


background image
Head unit
1 SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
sources.
2 DISP/REG button
Press to select different displays.
Press and hold to turn the regional function
on or off.
Also, press to control external unit.
3 TA/AF button
Press to turn TA function on or off. Press
and hold to turn AF function on or off.
4 TAPE EJECT button
Press to eject a tape from your cassette
player.
5 m/n buttons
Press to fast forward or rewind the tape.
6 LOCAL/BSM button
Press to turn local function on or off when
tuner is selected as a source.
Press and hold to turn BSM function on or
off when tuner is selected as a source.
Press to turn pause on or off when multi-CD
is selected as a source.
Press and hold to turn repeat on or off when
multi-CD is selected as a source.
Also, press to control external unit.
7 BAND button
Press to select among two FM and MW/LW
bands and cancel the control mode of func-
tions.
8 BTB button
Press to select various BTB (bass treble
booster) setting.
9 AUDIO button
Press to select various sound quality con-
trols.
a DETACH button
Press to remove the front panel from the
head unit.
1 2
3
4
5
6
7
8
9
a
b
c
d
e
Whats What
En
5
English
Section
02
HHHHHHHHHHHHHH