background image
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER EUROPE NV
Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER CORPORATION 2002
K-ZZY. MAY 2002 Printed in Japan
DVD NAVIGATION UNIT
AVIC-90DVD
UC
- This service manual should be used together with the following manual(s):
Model No.
Order No.
Mech. Module Remarks
CX-954
CRT2670
MS2
DVD Mech. Module:Circuit Description, Mech.Description, Disassembly
- This product has the unit part numbers as below.
Unit Part No.
Description
CPN1803
Main Assy (AVIC-90DVD/UC)
CPN1801
Main Assy (AVIC-9DVD--/EW)
*) The unit part numbers listed above are not for the service components.
- Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trade-
marks of Dolby Laboratories.
- For your inspection, the following extention cords are supplied. Use them if necessary.
Part to use
Part No.
Main PCB (CN3251) <--> DVD Core Unit V (CN1701)
GGD1284
Main PCB (CN3254) <--> CC Unit (CN302)
GGD1264
Main PCB (CN3901) <--> Interface PCB (CN5004)
GGD1171
Main PCB (CN552) <--> GPS Unit (CN461)
GGD1265
CC Unit (CN2) <--> DVD Core Unit V (CN1401)
GGD1268
For details, refer to "Important symbols for good services".
ORDER NO.
CRT2890
Service
Manual
AVIC-9DVD-- EW
AVIC-90DVD/UC


background image
2
AVIC-90DVD,9DVD--
1. SAFETY INFORMATION
CAUTION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65
CONTENTS
1. SAFETY INFORMATION ............................................2
2. EXPLODED VIEWS AND PARTS LIST .......................6
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...18
4. PCB CONNECTION DIAGRAM ................................94
5. ELECTRICAL PARTS LIST ......................................110
6. ADJUSTMENT........................................................128
7. GENERAL INFORMATION .....................................173
7.1 DIAGNOSIS ......................................................173
7.1.1 DISASSEMBLY .......................................173
7.1.2 CONNECTOR FUNCTION DESCRIPTION .....176
7.2 IC ......................................................................178
7.3 EXPLANATION .................................................190
7.3.1 CIRCUIT DESCRIPTIONS .......................190
7.3.2 OPERATIONAL FLOW CHART ...............191
7.4 CLEANING ........................................................192
8. OPERATIONS AND SPECIFICATIONS...................193
1. Safety Precautions for those who Service this Unit.
· Follow the adjustment steps (see pages 129 through 149)in the service manual when servicing this unit. When
checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results.
Caution:
1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
- AVIC-9DVD--/EW
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.
- AVIC-90DVD/UC


background image
3
AVIC-90DVD,9DVD--
2. The triangular label is attached to the mechanism
unit frame.
On the bottom of the player.
CAUTION :
VORSICHT :
ADVARSEL :
VARNING :
VARO!
:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN
ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETZEN!
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING
UNDGÅ UDSÆTTELSE FOR STRÀLING.
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN.
AVATTAESSA ALTISTUT NÄKYVÄ JA NÄKYMÄTTÖMÄLLE
LASERSATEIL YLLE. ÄLÄ KATSO SÄTEESEN.
VRW1699
CLASS 1
LASER PRODUCT
WARNING!
The AEL (accessible emission level )of the laser power output is less than CLASS 1
but the laser component is capable of emitting radiation exceeding the limit for
CLASS 1.
A specially instructed person should do servicing operation of the apparatus.
Laser diode characteristics
Wave length:
DVD:640~660nm
CD:770~810nm
Maximum output:2.44mw(Emitting period :9sec.)
DVD:743mw(Emitting period : unlimited)
Additionla Laser Caution
Transistors Q1104 and Q1108 in PCB drive the laser diodes for DVD and CD
respectively. When Q1104 or Q1108 is shorted between their terminals,
the laser diodes for DVD or CD will radiate beam. If the top cover is removed
with no disc loaded while such short-circuit is continued, the naked eyes may
be exposed to the laser beam.


background image
4
AVIC-90DVD,9DVD--
- DVD Player Service Precautions
1.
Never adjust the LD VR in the pickup unit to protect the pickup from electrical damages.
2. For pickup unit(service)(CXX1530) handling, please refer to"Disassembly"(see page 173).
During replacement, handling precautions shall be taken to prevent an electrostatic discharge(set the short switch
of the pickup unit to the SHORT side).
3. During disassembly, be sure to turn the power off since an internal IC might be destroyed when a connector is
plugged or unplugged.
4. Please adjusting the skew after changing the pickup unit(see page 132).
- High voltage is generated in the inverter when the power is supplied to the system. To avoid an electric shock,
reconfirm that the power switch is set to OFF before starting operation.
- Check of installation direction when G-Sensor Unit was after repair.
Lock-screw
Lock-screw
Parallel
Parallel
Lever
Lever
Forward / Aft direction of vehicle
Forward / Aft direction
of vehicle
Front
Front
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.
5. Lubricants, glues, and replacement parts
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.
4. Shipping mode and shipping screws
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.


background image
5
AVIC-90DVD,9DVD--