background image
TA-RW244/144
Features ................................................ 2
Important safeguards ........................... 3
Precautions .......................................... 3
Control positions and names ............... 4
Setting the voltage selector .................. 4
System connections ............................. 5
Power connections ............................... 5
To play a tape ...................................... 6
Reverse mode function ........................ 7
Recording ............................................ 8
Making good sound recordings ........... 9
Tape dubbing ..................................... 10
Useful recording functions ................ 11
Connecting ONKYO components
for z operation ................................ 12
Handling cassette tapes ...................... 13
Cassette deck maintenance ................ 14
Specifications .................................... 14
Troubleshooting guide ....................... 15
CONTENTS
Instruction Manual
Stereo Cassette Tape Deck
AUTO REVERSE/COMPUTER CONTROL
AUTO REVERSE/COMPUTER CONTROL
STEREO CASSETTE TAPE DECK RI
PLAYBACK DECK-A
PLAYBACK/RECORDING DECK-B
DOLBY NR
REVERCE MODE
AUTO SPACE
DUBB.STOP
DUBBING
COUNTER
HIGH
NORMAL
A/B
RESET
REC LEVEL
MIN
MAX
,
,
,
EJECT
EJECT
POWER
STAND-BY


background image
2
Thank you for your purchase of the ONKYO
TA-RW244/144 Cassette Tape Deck.
Please read this manual thoroughly before making connections
and plugging in the AC power cord.
Following the instructions in this manual will enable you to
obtain optimum performance and maximum listening enjoyment
from your new TA-RW244/144.
Please retain this manual for future reference.
Features
Full-logic record/play transports with auto reverse and
continuous play
Full-logic controls provide smooth, trouble-free electronic
switching, and keep you from having to press the stop button when
switching between functions. And auto-reverse/continuous play
lets you play both sides of both cassettes in sequence, without
having to take out the tapes and flip them over.
Two eight-segment peak-holding fluorescent meters
The easy-to-read FL meters have peak-holding functions, which
are indispensable when setting the best record/playback levels.
Four-digit electronic tape counter
The large, clear electronic tape counter shows the current tape
position, so you can easily edit and locate specific sections.
CD synchro recording
This feature lets you easily make accurate recordings from a
compact disc at a touch of a button, when your tape deck is
connected to certain z (remote interactive) compatible ONKYO
CD players.
z
z
z
z
z (Remote Interactive) compatible
If you're one of the fortunate ones who own other ONKYO
components that bear the z mark, simple single-cable connection
lets you operate all of the major functions of both transports of
your TA-RW244/144 with the other component's remote. (The
remote control supplied with ONKYO z CD players covers
Deck-B functions only.)
Other features
· Auto tape selector: Automatically sets the optimum bias and
equalization levels for the type of tape you insert.
· Dolby B and C Noise Reduction: Reduces the audibility of
undesirable tape hiss while retaining music nuances.
· Auto space rec mute: Inserts precise five-second breaks between
songs to give your tapes a more professional touch and to make
music search easier.
FOR CANADIAN MODEL:
(POUR LE MODELE CANADIEN)
· For models having a power cord with a polarized plug
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
· Sur les modèles dont la fiche est polarisée.
ATTENTION:POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQ'AU FOND.
ATTENTION FOR BRITISH MODEL
Replacement and mounting of an AC plug on the power supply
cord of this unit should be performed only by qualified service
personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
in the plug which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal in the plug which is marked with the letter L or coloured
RED.
IMPORTANT
A 5 amp fuse is fitted in this plug. Should the fuse need to be
replaced, please ensure that the replacement fuse has a rating of 5
amps and that it is approved by ASTA or BSI to BS1362. Check
for the ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF PLUG IS IN-
SERTED INTO ANY 13 AMP SOCKET.
If in any doubt, please consult a qualified electrician.
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GMBH
INDUSTRIESTRASSE 18/20
82110 GERMERING,
GERMANY
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN55013, EN55020, EN60555-2, -3
and EN60065
GERMERING,GERMANY
ONKYO EUROPE ELECTRONICS GMBH
H. YAMAZOE
· The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.
· The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
"TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE."
CAUTION
"TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL."
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Supplied accessory
Audio connection
cable(2)
z cable(1)
FOR EUROPEAN MODEL:


background image
3
Precautions
1. Warranty Claim
You can find the serial number on the rear panel of the unit. In
case of warranty claim, please report this number.
2. Recording Copyright
Recording of copyrighted material for other than personal use is
illegal without permission of the copyright holder.
3. Deck Location
· Do not use or leave in direct sunlight or in other places
subject to high temperature and humidity. The unit should
also not be left in potentially hot places such as near heating
appliances. Excessive heat and moisture can lead to internal
damage and serious malfunctions (this also applies to cassette
tapes).
The recommended ambient temperature range is 5°C to 35°C.
· Avoid damp and dusty places and locations prone to vibra-
tions.
· Be extremely careful with the recording/playback heads.
Clean and demagnetize them regularly, but under no
circumstances should magnets or other metals be used
anywhere near the heads.
· This unit is extremely sensitive to magnetic fields, so do not
use near large speakers or other devices which generate
magnetic fields.
· Hum may even be induced by magnetic flux leakage from the
power transformer in certain amplifiers. Therefore, this unit
should also be kept clear of the amplifier.
· Do not remove the cabinet case. If any of the internal parts
are handled, there is a considerable danger of electric shock.
4. Cassettes to Avoid:
· Cassettes with poorly formed cases that rattle during rewind
and fast forward.
· Low cost cassettes with no guide roller or pressure pad spring
should never be used for stereo.
· C-120 cassettes -- because the tape and the coating are
extremely thin, distortion levels are high. Also, even a slight
stretching of the tape will make it susceptible to being caught
up in the pinch roller and capstan.
· Endless tapes, if used for a long period of time, can overheat.
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CARE-
FULLY.
· The voltage of the available power supply differs according
to country or region. Be sure that the power supply voltage of
the area where this unit will be used meets the required
voltage (e.g., AC230V 50Hz or AC120V 60Hz) written on
the rear panel.
· Voltage Selector (Rear Panel)
Worldwide models are equipped with a voltage selector to
conform with local power supplies. Be sure to set this switch
to match the power supply in your area before plugging in
the unit. Models without a voltage selector can only be used
in areas where the power supply voltage is the same as that of
the unit. (See page 4)
Important safeguards
1. Read Instructions -- All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions -- The safety and operating instructions should
be retained for future reference.
3. Heed Warnings -- All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions -- All operating and use instructions should be
followed.
5. Water and Moisture -- The appliance should not be used near
water -- for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and the
like.
6. Carts and Stands -- The appliance should be used only with a cart
or stand that is recommended by the manufacturer.
6A. An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surface may cause the appliance
and cart combination to overturn.
7. Wall or Ceiling Mounting -- The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
8. Ventilation ­ The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or if placed in a
built-in installation, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings, there should be free
space of at least 20 cm (8 in.) and open up behind the appliance.
9. Heat -- The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
10. Power Sources -- The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
11. Polarization -- If the appliance is provided with a polarized plug
having one blade wider than the other, please read the following
information: The polarization of the plug is a safety feature. The
polarized plug will only fit the outlet one way. If the plug does not fit
fully into the outlet, try reversing it. If there is still trouble, the user
should seek the services of a qualified electrician. Under no
circumstances should the user attempt to defeat the polarization of the
plug.
12. Power-Cord Protection -- Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to the cords at
plugs, convenience receptacles, and the point where they exit from
the appliance.
13. Cleaning -- The appliance should be cleaned only as recommended
by the manufacturer.
14. Nonuse Periods -- The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
15. Object and Liquid Entry -- Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through
openings.
16. Damage Requiring Service -- The appliance should be serviced by
qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance;
or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E.
The appliance has been dropped, or the enclosure damaged.
17. Servicing -- The user should not attempt to service the appliance
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
PORTABLE CART WARNING
S3125A


background image
4
Control positions and names
For more information about a button or control, turn to the page number listed in square brackets([ ]).
Setting the voltage selector (Worldwide model only)
Models without a voltage selector can only be used in areas where the power supply is the same as that of the cassette deck.
1. Determine the proper voltage for your
area: 220-230 V or 120 V.
2. If the preset voltage does not conform
to your area, insert a screwdriver into
the groove in the switch. Slide the
switch all the way to the right (120 V)
or to the left (220-230 V), whichever is
appropriate.
AUTO REVERCE
AUTO REVERCE
STEREO CASSETTE TAPE DECK RI
ONKYO
PLAYBACK DECK-A
PLAYBACK/RECORDING DECK-B
EJECT
EJECT
DOLBY NR
REVERCE MODE
DUBBING
COUNTER
HIGH
NORMAL
A/B
RESET
REC LEVEL
MIN
MAX
12 3 4
5
13
14
12
11
10
67 8
9
AUTO SPACE
DUBB.STOP
POWER
STAND-BY
TA-RW144
TA-RW244
STAND-BY/ON
MAIN POWER
POWER
STAND-BY
ON
OFF
STAND-BY
L
R
dB
-20
-
-10
-6
-3
+3
0+6
ab
c
d
h
j
PAUSE
DECK-B
PLAY
OFF
B
C
DOLBY NR
HI-SPEED
DUBBING
DECK-A
PLAY
A
B
g
REC
e
f
i
Front panel
1. Deck A cassette holder [6]
2. DOLBY NR button [6, 8, 9]
3. Deck A r EJECT button [6]
4. REVERSE MODE button [6, 7, 8, 10]
5. DUBBING button (NORMAL/HIGH) [10]
6. COUNTER A/B button [8]
7. Deck B r EJECT button [8]
8. COUNTER RESET button [8]
9. Deck B cassette holder [8]
10. REC LEVEL control knob [8]
11. Deck B operation buttons
t
: Rec/pause button [8]
AUTO SPACE
: Auto space button [11]
d
: Rewind button [7]
f
: Fast forward button [7]
a
: Reverse play button [6, 9]
e
: Stop button (DUBB.STOP) [6, 9, 10]
s
: Forward play button [6, 9]
12. Deck A operation buttons
d
: Rewind button [7]
f
: Fast forward button [7]
a
: Reverse play button [6]
e
: Stop button [6]
s
: Forward play button [6]
13. STAND-BY indicator [5]
14. POWER button [5] (TA-RW144)
STAND-BY/ON button [5] (TA-RW244)
MAIN POWER button [5] (TA-RW244)
Display
Deck A direction indicator
Reverse mode indicator
Dubbing indicators
Dolby NR indicators
o REC indicator
g PAUSE indicator
Deck B direction indicator
Counter
Deck A/B indicator
Peak level indicator
LINE IN LINE OUT
LL
RR
(REC)
(PLAY)
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
®
RATING: AC120/220-230V
50/60Hz
17W
STEREO CASSETTE TAPE DECK
MODEL NO. TA-RW244
DOLBY NOISE REDUCTION MANUFACTURED UNDER LICENSE
FROM DOLBY LABORATORIES LICENSING CORPORATION. `DOLBY'
AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY
LABORATORIES LICENSING CORPORATION.
VOLTAGE SELECTOR
220-230V
120V
2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,
JAPAN
MWT
27122309Y
REMOTE
CONTROL
VOLTAGE SELECTOR
220-230V
120V


background image
5
LR L R
(REC)(PLAY)
LINE IN LINE OUT
LL
R
(REC)
(PLAY)
R
VOLTAGE SELECTOR
220-230V
120V
REMOTE
CONTROL
Amplifier
System connections
· Do not plug in the AC power cord until all other connections have been made.
· On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to
the left channel. Refer to the amplifier's instruction manual for further information on connections.
To AC outlet
Connecting to an amplifier
Connect the tape deck LINE IN
jacks to the TAPE REC jacks on
the rear panel of the amplifier and
the tape deck LINE OUT jacks to
the amplifier TAPE PLAY jacks.
Refer to the amplifier's instruction
manual for further information on
connections.
See "Connecting ONKYO components
for z operation" on page 12.
Power connections
Switching power on
TA-RW144:
1. Plug the AC power cord into a wall
outlet.
The STAND-BY indicator will light.
2. Press the POWER button.
The STAND-BY indicator will go out
and the display will light.
TA-RW244:
1. Plug the AC power cord into a wall
outlet.
2. Press the MAIN POWER button.
The STAND-BY indicator will light.
3. Press the STAND-BY/ON button.
The STAND-BY indicator will go out
and the display will light.
· Pressing the a or s button of either
Deck A or Deck B when the unit is in
standby status will also cause the
display to light and playback will start.
· If the tape deck is plugged into the
amplifier's AC outlet, the amplifier's
AC power cord must be plugged into a
wall outlet and its power switched on
before the tape deck can operate.
POWER
STAND-BY
1
2
3
See "Power
connections"
below.
MAIN POWER
STAND-BY
(TA-RW144)
(TA-RW244)
STAND-BY/ON
STAND-BY
(TA-RW244 only)
(TA-RW144 only)
POWER
STAND-BY