background image
AV Receiver
DTR-10.5
Instruction Manual


background image
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the appara-
tus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table spec-
ified by the manufacturer, or
sold
with
the
apparatus.
When a cart is used, use cau-
tion when moving the cart/
apparatus
combination
to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is dam-
aged,
B. If liquid has been spilled, or objects have fallen
into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in
any way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous volt-
age points or short-out parts that could result in a
fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
Don't put candles or other burning objects on top of
this unit.
17. Batteries
Always consider the environmental issues and fol-
low local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation,
such as a bookcase or rack, ensure that there is ade-
quate ventilation.
Leave 20 cm (8") of free space at the top and sides
and 10 cm (4") at the rear. The rear edge of the shelf
or board above the apparatus shall be set 10 cm (4")
away from the rear panel or wall, creating a flue-like
gap for warm air to escape.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
PORTABLE CART WARNING
S3125A


background image
3
Thank you for purchasing an Integra AV Receiver.
Please read this manual thoroughly before making connections and plugging in the unit.
Following the instructions in this manual will enable you to obtain optimum performance
and listening enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Precautions
1. Recording Copyright
Unless it's for personal use only, recording copyrighted
material is illegal without permission of the copyright
holder.
2. AC Fuse
The AC fuse inside the DTR-10.5 is not user-serviceable.
If you cannot turn on the DTR-10.5, contact your Integra
dealer.
3. Care
Occasionally you should dust the DTR-10.5 all over with a
soft cloth. For stubborn stains, use a soft cloth dampened
with a weak solution of mild detergent and water. Dry the
DTR-10.5 immediately afterwards with a clean cloth.
Don't use abrasive cloths, thinners, alcohol, or other
chemical solvents, because they may damage the finish or
remove the panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country. Make sure
that the voltage in your area meets the voltage requirements
printed on the DTR-10.5's rear panel (e.g., AC 230 V, 50 Hz or
AC 120 V, 60 Hz).
Setting the [Standby/On] switch to Standby does not fully
shutdown the DTR-10.5. If you do not intend to use the
DTR-10.5 for an extended period, remove the power cord from
the AC outlet.
For U.S. Models
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Section 820-40 of the NEC which provides guide-
lines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
FCC Information for User
CAUTION:
The user changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
·
Consult the dealer or an experienced radio/TV technician for help.
For Canadian Models
NOTE:
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
RSS 210, Low Power Licence-Exempt Radiocommunications
Devices (All FrequencyBands).
For models having a power cord with a polarized plug:
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle Canadien
REMARQUE:
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
CNR-210, Dispositifs de radiocommunications de faible
puissance, exempts de licence (pour toutes les bandes de
fréquences).
Sur les modèles dont la fiche est polarisée:
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU'AU FOND.
Getting
Star
ted


background image
4
Table of Contents
Important Safety Instructions ..........................2
Precautions ........................................................3
Features .............................................................6
Supplied Accessories .......................................8
Connecting the Supplied Power Cord ............ 8
Before Using the DTR-10.5 ...............................9
Installing the Batteries .................................... 9
Using the Remote Controller .......................... 9
Types of the DTR-10.5 Option Boards ......... 10
Installing the Option Boards
(USA and Australian Models Only) ............ 11
Index Parts and Facilities ...............................12
Front Panel ................................................... 12
Front Panel Display ...................................... 15
Rear Panel.................................................... 16
Remote Controller (Amp Mode).................... 18
Speaker Placement .........................................20
Basic Speaker Placements for Home Theater
and the Function of Respective Speakers ... 20
Placing the Speakers.................................... 21
Speaker Placement Suitable for THX Audio ... 22
Speaker Placement Suitable for a Music
Source such as DVD-Audio ....................... 22
Available Speaker Placements According to
the Number of Speakers ............................ 23
Connection Examples................................... 24
Connecting Speakers......................................27
Connecting to the Speaker Terminals .......... 27
Connecting a Subwoofer .............................. 28
Connecting Auxiliary Power Amplifier
(For Speaker System [A] only) ................... 28
Using the BTL Connection............................ 29
Using Bi-amp Connection ............................. 29
Connecting Antennas .....................................30
Connecting the Indoor FM Antenna.............. 30
Connecting the AM Loop Antenna................ 31
Connecting an Outdoor FM Antenna ............ 31
Connecting an Outdoor AM Antenna............ 31
Connecting AV Components..........................32
Types of Connection Cables and Terminals ... 32
Connecting Monitors such as TV or
Projector..................................................... 34
Connecting a DVD Player............................. 35
Connecting a DVD Recorder or Digital VCR
(VIDEO 1)................................................... 36
Connecting a VCR (VIDEO 2, VIDEO 3) ...... 37
Connecting a DBS Tuner, DBS TV, or BS/CS
Tuner.......................................................... 39
Connecting a Portable DVD Player or Video
Camcorder ................................................. 40
Connecting a CD Player, Turntable or
Tuner.......................................................... 40
Connecting a Recording Device such as MD
Recorder, DAT Deck, CD Recorder or
Cassette Deck............................................ 41
Connection Using the i.LINK (AUDIO)
Terminal (
)............................................. 42
Connection Using HDMI Terminals............... 45
Connecting
-compatible AV
Components ................................................ 47
Connections for Remote Control (
).......... 47
Connecting Components not Reached by the
Remote Controller Signals (IR IN) ............. 48
If Remote Controller Signal Does not Reach
the DTR-10.5 Remote Sensor .................... 48
Using an External Device with 12V Trigger
Terminal ....................................................... 49
Basic Operation of Remote Controller
Buttons ........................................................ 50
To Operate the DTR-10.5 (AMP Mode) ........ 50
To Select an Input Source............................. 50
To Operate a Connected Component (Mode
Switching) ................................................... 51
To Select a Source in Zone 2 or Zone 3 ....... 51
To Perform a Macro Operation ..................... 51
Customizing Your Remote Controller............ 51
Connecting the Power/Basic Operations ..... 52
Turning on the Power.................................... 52
Operating on the DTR-10.5........................... 52
Turning on the Power from the Remote
Controller .................................................... 53
Operating with Remote Controller................. 53
Using the Listening Modes ............................ 58
Selecting the Listening Mode ........................ 61
Listening to Radio Broadcasts...................... 62
Using the Tuner............................................. 62
Tuning into a Radio Station........................... 62
Enjoying Multichannel Playback ................... 64
How to Connect............................................. 64
How to Set Up ............................................... 64
Playing Back in Multichannel Sound ............. 65
Adjusting the Volume Level of Speakers for
Multichannel Playback................................ 65
Enjoying Movies and Music in the Remote
Zone (Zone 2/3) ........................................... 66
Connecting and Setup................................... 66
Enjoying Movies and Music in a Remote
Zone ........................................................... 67
Recording a Source........................................ 69
Recording Audio/Video While Playing........... 70
Recording Audio/Video on a Component
While Playing Another ................................ 70
Recording the Video from One Source and
the Audio from Another Source .................. 71
Enjoying Net Audio......................................... 72
About Net-Tune............................................. 72
Networking Your DTR-10.5 ........................... 73
Using the Remote Controller......................... 74
Enjoying Internet Radio................................. 76
Playing a Music File Saved on the Network
Audio Server............................................... 78
Configuring the Music Server........................ 80
Getting Started
Installation and Connections
Operations


background image
5
Table of Contents--Continued
Setup Menu...................................................... 82
OSD Map (MAIN A)....................................... 82
OSD Map (MAIN B)....................................... 84
OSD Map (ZONE 2) ...................................... 85
Navigating the Setup Menu........................... 86
Hardware Setup............................................... 87
Remote Control Setup Sub-menu ................. 87
TV Format Sub-menu.................................... 87
AM Frequency Setup Sub-menu
(Australian Models Only) ............................ 87
Speaker/Output Setup .................................... 88
Speaker Configuration Sub-menu................. 88
Speaker Impedance Sub-menu .................... 89
Speaker Crossover Sub-menu...................... 89
Speaker Distance Sub-menu ........................ 89
Notch Filter Sub-menu .................................. 90
Level Calibration Sub-menu.......................... 90
THX Audio Setup Sub-menu......................... 91
Audio Output Assign Sub-menu.................... 91
Video Output Assign Sub-menu.................... 92
Input Setup ...................................................... 93
Audio Assign Sub-menu (when input is
other than NET AUDIO).............................. 94
Music Server Sub-menu (when input is NET
AUDIO) ....................................................... 95
Video Assign Sub-menu................................ 95
Listening Mode Preset Sub-menu................. 96
Character Edit Sub-menu.............................. 97
IntelliVolume Sub-menu ................................ 98
Delay Sub-menu ........................................... 98
12V Trigger Assign Sub-menu ...................... 98
Listening Mode Setup..................................... 99
Mono Setup Sub-menu ................................. 99
Multiplex Setup Sub-menu ............................ 99
Stereo Setup Sub-menu.............................. 100
Direct, Pure Audio Setup Sub-menu ........... 101
Multichannel Input Setup Sub-menu ........... 102
i.LINK(IEEE1394):DVD-Audio Input Setup
Sub-menu ................................................. 103
i.LINK(IEEE1394):SACD Input Setup
Sub-menu ................................................. 105
Dolby Digital Setup Sub-menu .................... 106
DTS Setup Sub-menu ................................. 108
AAC Setup Sub-menu................................. 109
Dolby Pro Logic IIx/DTS NEO:6
(2ch Input only) Setup Sub-menu ............. 110
THX Setup Sub-menu ................................. 112
Mono Movie Setup/Enhance Setup/Orchestra
Setup/Unplugged Setup/Studio-Mix Setup/
TV Logic Setup Sub-menu ....................... 114
All Ch Stereo Setup/Full Mono Setup
Sub-menu ................................................. 115
Dolby Virtual Speaker Setup Sub-menu ..... 116
Dolby Headphone Setup Sub-menu ........... 117
Audio Adjust.................................................. 118
Tone Control Sub-menu.............................. 118
Preferences ................................................... 119
Volume Setup Sub-menu ............................ 119
Headphone Level Setup Sub-menu ............ 119
OSD Setup Sub-menu ................................ 119
OSD Position Sub-menu ............................. 119
i.LINK Setup ...................................................120
Wakeup Setup ............................................ 120
OSD for DVD .............................................. 120
OSD for DVD (Zone 2) ............................... 120
DVD Output Synchro .................................. 120
Network Setup ...............................................121
IP Address Sub-menu ............................... 121
Proxy Sub-menu ........................................ 121
MAC Address Sub-menu ............................ 121
Client Sub-menu ......................................... 122
Lock/Version Setup.......................................123
Lock Setup Sub-menu ................................ 123
Firmware Version Sub-menu ...................... 123
Operating Integra/Onkyo Products Using the
Remote Controller .....................................124
Operating Integra/Onkyo Products Using
the
Connection .................................. 124
DVD Mode .................................................. 124
CD Mode .................................................... 126
MiniDisc Mode ............................................ 127
Tape Mode ................................................. 128
Using the Remote Controller with Other
Components...............................................129
Entering a Remote Control Code ............... 129
Learning Commands from Another Remote
Controller.................................................. 136
Using Macros.............................................. 137
Other Settings for the Remote Controller ...139
Editing Remote Controller Modes............... 139
Resetting the Remote Controller ................ 141
Using the Remote Controller with Radio
Frequency ................................................ 141
Changing the Remote Controller's
Control ID ................................................. 142
Relationship Between Input Source and
Listening Mode ..........................................143
Troubleshooting ............................................146
Power ......................................................... 146
Audio .......................................................... 146
Video .......................................................... 147
Tuner .......................................................... 147
Remote Controller ...................................... 147
Recording ................................................... 148
Zone 2/Zone 3 ............................................ 148
Net-Tune..................................................... 148
Others ......................................................... 148
Error Messages .......................................... 149
Specifications ................................................150
Setup Menu
Using the Remote Controller
Miscellaneous