background image
DPS-6.5
SERVICE MANUAL
SERVICE MANUAL
Black model
Ref. No. 3831
Oct, 2004
DVD PLAYER
MODEL
DPS-6.5
MDD
MUA
120V AC, 60Hz
100-240V AC 50/60Hz
RC-583DV
DPS-6.5
Open /Close
Pause
Stop
Play
Standb y/On
Standby
Progressive
Play Mode
Clear
Display
Dimmer
On
Standb y
Open/
Close
Play Mode
Display
12
3
45
6
789
0
Clear
Dimmer
Top Menu
Menu
Return
Setup
Audio
Angle
Subtitle
Zoom
Stop
Play
Pause
Do wn
Up
TV Contr ol
TV/ Video
Channel
On/
Standb y
Volume
RC-583DV
Enter
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK
ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.


background image
DPS-6.5
SPECIFICATION
DPS-6.5
General
Specifications and features subject to change without notice.
Signal System
North American model: NTSC
Australian model: PAL/NTSC
Composite Video Output/Impedance
1.0 V (p-p)/75
negative sync, RCA
S Video Output/Impedance
Y: 1.0 V (p-p)/75
negative sync, 4-pin mini DIN
C: 0.286 V (p-p)/75
Component Video Output/Impedance
Y: 1.0 V (p-p)/75
PB/PR: 0.7 V (p-p)/75
RCA/ phono
Component Video Frequency Response
5 Hz-50 MHz
Frequency response
DVD Audio
4 Hz-88 kHz (192 kHz)
DVD Linear Sound
4 Hz-44 kHz (96kHz)
4 Hz-22 kHz (48kHz)
Audio CD
4 Hz-20 kHz (44.1kHz)
S/N Ratio
106 dB
Audio Dynamic Range
96 dB
THD (Total Harmonic Distortion)
0.003 % (1kHz)
Wow and Flutter
Below threshold of measurability
Audio Output (Digital/Optical)
-22.5 dBm
Audio Output/Impedance (Digital/Coaxial)
0.5 p-p/75
Audio Output/Impedance (Analog)
2.0 V (rms)/440
Power Supply
North American model: AC 120 V, 60 Hz
Australian model: AC 100-240 V, 50/60 Hz
Power Consumption
11 W
Stand-by Power Consumption
North American model: 0.6 W
Australian model: 0.8 W
Dimensions (W x H x D)
435 W x 81 H x 312 D mm
(17 1/8 W x 3 3/16 H x 12 5/16 D inches)
Weight
3.5 kg (7.7 lbs)
Operation Condition Temperature/Humidity
5 C-35 C (41 F-95 F)/5 %-85%
Disc Compatibility
SACD, DVD-Audio, DVD-video, DVD-R/RW (VR, VIDEO), CD,
CD-R/RW, Video CD, SVCD, WMA, MP3, WMA, JPEG
Disc that have not been property finalized may only be partially
playable or not playable at all


background image
DPS-6.5
SERVICE PROCEDURES-1
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs a laser. Therefore, be sure to follow
carefully the instructions below when servicing.
WARNING!!
SERVICE WARNING : DO NOT APPROACH THE
LASER EXIT WITH THE EYE TOO CLOSELY.
IN CASE IT IS NECESSARY TO CONFIRM LASER
BEAM EMISSION, BE SURE TO OBSERVE FROM
A DISTANCE OF MORE THAN 30cm FROM THE
SURFACE OF THE OBJECTIVE LENS ON THE
OPTICAL PICKUP BLOCK.
Laser Diode Properties
LASER WARNING
Wavelength: 650/780nm (DVD/CD)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
WARNING
This unit contains a semiconductor laser system and is classified
as a "CLASS 1 LASER PRODUCT". So, to use this model
properly, read this Instruction Manual carefully. In case of any
trouble, please contact the store where you purchased the unit.
To prevent being exposed to the laser beam, do not try to open
the enclosure.
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. DO NOT STARE INTO BEAM.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
The label on the right
is applied on the rear
panel except for USA
and Canadian
models.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
"CLASS 1 LASER
PRODUCT "
CAUTION:
CAUTION:
SERVICE PROCEDURE
1. Replacing the fuses
REF. NO.
PART NO.
DESCRIPTION
This symbol located near the fuse indicates that the
fuse used is show operating type, For continued protection against
fire hazard, replace with same type fuse , For fuse rating, refer to
the marking adjest to the symbol.
Ce symbole indique que le fusible utilise est e lent.
Pour une protection permanente, n'utiliser que des fusibles de meme
type. Ce demier est indique la qu le present symbol est apposre.
F1
252252 or
1.6A-TL/T-ST2 <MDD>>
252147
1.6A-TSC
LASER BEAM CAUTION LABEL
252310
2.5A-TH250V Except <MUA>
F1
<MDD> : North American model
<MUA> : Australian model


background image
DPS-6.5
SERVICE PROCEDURES-2
Factory-shipped condition.
Connect the power cord to inlet terminal lighting the LED
Press the [STOP] and [STANDBY] same time with NO DISC condition.
Push button "STANDBY".
Pull out the power cord.
INITIALIZING
2. Safety-check out
(Only U.S.A. model)
After correcting the original service problem perform the
following safety check before releasing the set to the customer
Connect the insulating-resistance tester between the plug of
power supply cord and terminal GND on the back panel.
Specifications: More than 10M ohm at 500V
REMOVE THE SOLDER OF LASER DIODE SHORT
When replace the mechanism or DVD main PC board.
Shorting the solder of Shot-circuit land. (2 positions)
Short Land
Mechanism


background image
DPS-6.5
DPS-6.5
EXPLODED VIEW
A055
A051
A052
A010
A018
A008
x2
A018
U05
U02
U01
U06
U04
U03
S731
A040
A025
A027
A001
A403
A028
A026
A401
Z106
Z101
Z103
Z102
CN103
CN201
CN451
A007
A020
P901A
P910
F1
A411
A415
A013
A415
A056
x 6
Z104
x 4
A007
x 4
A007
x 4
A033
x 3
A007
x 2
A029
x 2
A404
x 2
A056
x 3
A007
x 10
A056
x 15
A007
x 4
A015
x 2
A414
x 2
A003
x 4
A012
x 3
A005
x 8
A007
x 4
CN1
Z107
DAC
A034
x 2
A009
x6
F2
CP1