background image
© PRINTED IN JAPAN B64-2777-10/01 (M) (A)
VZ-5000
7-Inch WIDE SCREEN MONITOR
INSTRUCTION MANUAL
TJ
!"#$%
!"
TJ
!"#$%
!"
7-


background image
The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the
controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display
on the actual equipment, and some of the illustrations on the display may represent something impossible in actual
operation.
Before Use .............................................................3
· Safety Precautions
Monitor Control Function.....................................4
· Opening the Monitor
· Closing the Monitor
· Power Off
· Switching the Monitor's Picture
· Volume <SP VOL>
· Switching the TV/Video Screen Mode [MODE]
· Switching the Speaker Mode [SP]
· Switching the AV Output [AV]
· Switching to the Angle/Screen Control Screen
· Turning the Monitor Picture Off
Screen Control Screen
· Adjusting the Picture Quality
· Auto Dimmer [AUTO DIM]
· Switching to the Angle Control Screen
· Exit the Screen Control Screen
Angle Control Screen
· Adjusting the Angle Position [ANGLE]
· Adjusting the Slide Position [SLIDE]
· Automatic Open/Close [AUTO O/C]
· Monitor Action [ACTION]
· Switching to the Screen Control Screen
· Exit the Angle Control Screen
On Screen Control Mode
· Switching the TV/Video Screen Mode [MODE]
· Switching the Speaker Mode [SP]
· Switching the AV Output [AV]
· Exit the On Screen Mode
Setup Function ......................................................8
Setup Menu Screen
· Selecting the Setup Menu Screen
· Selecting the System Setup Screen
· Selecting the TV Setup Screen
· Selecting the Touch Panel Adjustment Screen
· Exit the Setup Menu Screen
System Setup Screen-1
· Setting the NAV Mode [NAV]
· Setting the AV IN-1 Mode [AV-IN1]
· Setting the AV IN-2 Mode [AV-IN2]
· Select the AV IN-2 input display
· Touch Sensor Tone [BEEP]
· Switching the Setup Screen -2
· Exit the System Setup -1 Screen
System Setup Screen-2
· Setting the AV Output Mode [AV-OUT]
· FM Transmitter Function [FM-TX]
· Switching the Setup Screen -1
· Exit the System Setup -2 Screen
TV Area Setting Screen
· Setting the TV Area
· Exit the TV Area Setting Screen
Touch Panel Adjustment Screen
· Adjusting the Touch Position
TV Control Function............................................12
· Selecting the On Screen Control
· Selecting the Preset Band
· Seek Mode
· Selecting the Channel
· Station Preset Memory
· Auto Memory Entry
· Recalling a Preset Station
· Exit the Control Screen
Remote Control Function ...................................13
Installation ...........................................................14
Troubleshooting Guide.......................................20
Specifications ......................................................20
2 English
Contents


background image
English 3
Before Use
Safety Precautions
To prevent injury and/or fire, take the following
precautions:
· Ensure that the unit is securely installed. Otherwise it
may fly out of place during collisions and other jolts.
· When extending the ignition, battery or ground wires,
make sure to use automotive-grade wires or other cables
with an area of 0.75mm2 (AWG18) or more to prevent
wire deterioration and damage to the wire coating.
· To prevent short circuits, never put or leave any metallic
objects (e.g., coins or metal tools) inside the unit.
· If the unit starts to emit smoke or strange smells, turn off
the power immediately and consult your Kenwood dealer.
· Do not touch the liquid crystal fluid if the LCD is damaged
or broken due to shock. The liquid crystal fluid may be
dangerous to your health or even fatal.
If the liquid crystal fluid from the LCD contacts your body
or clothing, wash it off with soap immediately.
To prevent damage to the machine, take the
following precautions:
· Make sure to ground the unit to a negative 12V DC power
supply.
· Do not open the top or bottom covers of the unit.
· Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
· Do not subject the faceplate to excessive shock, as it is a
piece of precision equipment.
· When replacing a fuse, only use a new one with the
prescribed rating. Using a fuse with the wrong rating may
cause your unit to malfunction.
· To prevent short circuits when replacing a fuse, first
disconnect the wiring harness.
· Do not use any screws except for the ones provided. The
use of improper screws might result in damage to the
main unit.
· You cannot view video pictures whilst the vehicle is
moving. To enjoy TV/video pictures, find a safe place to
park and engage the parking brake.
· If you experience problems during installation, consult
your Kenwood dealer.
· If the unit does not seem to be working right, try pressing
the reset button first. If that does not solve the problem,
consult your Kenwood dealer.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry
soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with a
cloth moistened with neutral cleaner, then wipe neutral
detergent off.
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Screen brightness during low temperatures
When the temperature of the unit falls such as during
winter, the liquid crystal panel's screen will become
darker than usual. Normal brightness will return after
using the monitor for a while
2CAUTION
NOTE
2CAUTION
2WARNING
Reset button
English


background image
Opening the Monitor
1 Set the vehicle's parking brake.
2 Press the [OPEN/CLOSE] button.
The monitor will open.
· The gear shift lever or other parts may interfere with the
monitor when it opens. If so, move the gear shift lever
(being sure to do so safely) before operating the set. (The
monitor is drawn back in automatically if it cannot be
opened normally due to an obstacle.)
· If you open the monitor when the power is off, it switches
on and opened.
· The position to which the monitor slides or angle when the
power is turned on can be set. (Refer to the angle control
screen on (Page 6).
Closing the Monitor
Press the [OPEN/CLOSE] button.
The monitor will close.
Power Off
Press the [V.SEL] button for at least 1 second.
Power On
Press the [V.SEL] button.
Switching the Monitor's Picture
Press the [V.SEL] button.
Each time the button is pressed the monitor's picture
switches as follows:
During the KTC-V500N or KTC-V500P is not
connected:
Display
Picture
"VIDEO 1"
Video 1 (AV IN1 setting during "VIDEO 1")
"VIDEO 2"/
Video 2 (AV IN2 setting during "VIDEO 2"
"R-CAM"
or "R-CAM")
"NAV"
Navigation (NAV setting during "RGB" or
"AV IN1")
During the KTC-V500N or KTC-V500P is connected:
Display
Picture
"VIDEO 1"
Video 1 (AV-IN1 setting during "VIDEO 1")
"VIDEO 2"/
Video 2 (AV IN2 setting during "VIDEO 2"
"R-CAM"
or "R-CAM")
Channel
Television
"NAV"
Navigation (NAV setting during "RGB" or
"AV IN1")
For "AV IN" and "NAV" setting, refer to <System Setup
Screen> (Page 9).
You cannot view television and video pictures whilst the
vehicle is moving. To enjoy television and video pictures,
find a safe place to park and engage the parking brake.
Volume <SP VOL>
Increasing Volume:
Press the [
5] button.
Decreasing Volume:
Press the [
] button.
FNC
V.SEL
MODE
SCRN
OPEN/CLOSE
5
OPEN/CLOSE
4 English
Monitor Control Function


background image
English 5
FNC
V.SEL
MODE
SCRN
OPEN/CLOSE
Switching the TV/Video Screen Mode [MODE]
Press the [MODE] button.
Each time the button is pressed the screen mode
switches as follows:
Display
Setting
"FULL"
Full screen mode
"JUST"
Just screen mode
"ZOOM"
Zoom screen mode
"NORMAL"
Normal screen mode
You cannot operate when the navigation picture is displayed.
Switching the Speaker Mode [SP]
Press the [MODE] button for at least 1 second.
Each time the button is pressed for at least 1 second the
built-in speaker mode switches as follows:
Display
Picture
"NORMAL"
Sound with monitor picture
"TV"
Sound with televion picture
(During the KTC-V500N or KTC-V500P is
connected)
"NAV"
Sound with navigation picture
"VIDEO1"
Sound with video 1 picture
"VIDEO2"/
Sound with video 2 picture
"R-CAM"
"OFF"
Built-in speaker is turned off
S
Switching the AV Output [AV]
Press the [FNC] button for at least 1 second.
Each time the button is pressed for at least 1 second the
AV output switches as follows:
Display
Setting
"NORMAL"
Picture/sound with monitor picture
"TV"
Picture/sound of the television
(During the KTC-V500N or KTC-V500P is
connected)
"VIDEO1"/
Picture/sound input from the AV IN 1
"NAV"
terminal
"VIDEO2"/
Picture/sound input from the AV IN 2
"R-CAM"
terminal
Switching to the Angle/Screen Control Screen
Press the [SCRN] button.
(
Page 6)
Turning the Monitor Picture Off
Press the [SCRN] button for at least 1 second.
The picture reappears when the SCRN, MODE or FNC
button is pressed, or the screen is touched.
;;;
;;;
yyy
yyy
;;;
;;;
yyy
yyy
;;;
;;;
· JUST
· NORMAL
· FULL
· ZOOM
;;;
;;;
yyy
yyy
Screen Mode
English