background image
INSTRUCTION MANUAL
© B62-2159-00 (K, K2)
09 08 07 06 05 04 03 02 01 00
VHF FM TRANSCEIVER
TK-2300
UHF FM TRANSCEIVER
TK-3300


background image
Thank You
We are grateful for your purchase of this
Kenwood product and
welcome you to the Business Radio Service (BRS).
Your
Kenwood 2-way Business Radio is called a "transceiver",
meaning "transmitter & receiver". We believe this easy-to-
use transceiver will provide you with dependable and reliable
communications. This
Kenwood transceiver is a precision
device. Treat it with care, and you will enjoy years of reliable
operation.
Models Covered bY This Manual
TK-2300 (K): 4-channel VHF FM Transceiver
TK-3300 (K): 4-channel UHF FM Transceiver
TK-2300 (K2): 16-channel VHF FM Transceiver
TK-3300 (K2): 16-channel UHF FM Transceiver
FeaTures
·
4 channels (K) or 16 channels (K2) with 27 VHF operating
frequencies (TK-2300) or 89 UHF operating frequencies
(TK-3300) and 122 tone/ code settings for each channel
allowing you to ignore unwanted calls.
·
Built in voice scrambler gives you complete privacy for your
conversations.
·
Hands free operation when using an optional headset.
·
Voice announcement lets you know which channel you have
selected and which settings you have made when reassigning
key functions and channel settings.


background image
Operating COnditiOns
Open locatons (no obstructons)
Up to 6 mles (9.6 km)
Resdental areas (near buldngs) Up to 1.5 mles (2.4 km)
In steel/ concrete renforced
buldngs
Up to 250,000 square feet
(23,220 m2)
In hgh rses
Up to 20 floors
Note: The lsted ranges are based on feld testng and may vary wth
your operatng condtons and ndvdual transcever.
Terminal Descriptions
Speaker/ Microphone Jacks
It s possble to use a resn-based cover for the Speaker/ Mcrophone jacks.
NO.
Name
Description
Impedance
I/O
1
PTT / RXD
External PTT Input / Seral
Data Input
CMOS
I
2
MIC
External MIC Input
1.8 k
I
3
MICIN
Internal MIC Output
1.8 k
O
4
OPTDET
External Opton Detect
Hgh Impedance
I
5
5M
5V Output
100
O
6
AE
GND
GND
-
7
TXD
Seral Data Output
CMOS
O
8
NC
No Connecton
-
-
9
SPO
Audo Input
8
I
10
SPI
Receved Audo Output
8
O
Antenna Terminal
50 impedance
Battery Terminal
The battery termnal uses a sprng plate.
The negatve termnal connects to the chasss ground.
The battery s mounted on the rear sde of the transcever usng a latch
mountng method.


background image
FCC LiCense inFOrmatiOn
Your
Kenwood transcever operates on communcatons
frequences whch are subject to FCC (Federal Communcatons
Commsson) Rules & Regulatons. FCC Rules requre that all
operators usng Prvate Land Moble rado frequences obtan a
rado lcense before operatng ther equpment. Applcaton for
lcense must be made on FCC form 601, schedules D and H,
and Remttance form 159.
FAX: Forms can be obtaned by fax from the FCC Fax-On-
Demand system. Call 1-202-418-0177 from your fax machne
and request document number 000601 for the form, schedules,
and nstructons.
MAIL: Forms can be ordered by telephone, and wll be sent to
you by frst class mal. Call the FCC Forms Hotlne at
1-800-418-FORM (1-800-418-3676).
INTERNET: Form 601 and nstructons can be downloaded
from the FCC Forms webste at
http://www.fcc.gov/formpage.html
Before fllng out your Form 601 applcaton Techncal Data
secton, you must decde on whch frequences you wll operate.
See the frequency charts on pages 14 and 15.
QUESTIONS? Call the FCC for lcense applcaton questons
at 1-888-CALL-FCC (1-888-225-5322).


background image
One or more of the following statements may be
applicable:
FCC WARNING
Ths equpment generates or uses rado frequency energy. Changes
or modfcatons to ths equpment may cause harmful nterference
unless the modfcatons are expressly approved n the nstructon
manual. The user could lose the authorty to operate ths equpment f
an unauthorzed change or modfcaton s made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY
THE FCC
Ths equpment has been tested and found to comply wth the lmts
for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules.
These lmts are desgned to provde reasonable protecton aganst
harmful nterference n a resdental nstallaton.
Ths equpment generates, uses and can generate rado frequency
energy and, f not nstalled and used n accordance wth the nstructons,
may cause harmful nterference to rado communcatons. However,
there s no guarantee that the nterference wll not occur n a partcular
nstallaton. If ths equpment does cause harmful nterference to
rado or televson recepton, whch can be determned by turnng the
equpment off and on, the user s encouraged to try to correct the
nterference by one or more of the followng measures:
·
Reorent or relocate the recevng antenna.
·
Increase the separaton between the equpment and recever.
·
Connect the equpment to an outlet on a crcut dfferent from that
to whch the recever s connected.
·
Consult the dealer for techncal assstance.
ATTENTION:
The RBRC Recycle seal found on
Kenwood lthum-on
(L-on) battery packs ndcates
Kenwood's voluntary
partcpaton n an ndustry program to collect and recycle
L-on batteres after ther operatng lfe has expred.
The RBRC program s an alternatve to dsposng L-on
batteres wth your regular refuse or n muncpal waste
streams, whch s llegal n some areas.
For nformaton on L-on battery recyclng n your area, call (toll free)
1-800-8-BATTERY (1-800-822-8837).
Kenwood's nvolvement n ths program s part of our commtment to
preserve our envronment and conserve our natural resources.