background image
DUAL DIN SIZED CD RECEIVER
DPX-MP5110U
DPX-MP4110
DPX-MP3110
INSTRUCTION MANUAL
© B64-4186-00/00 (MW)


background image
2 | DPX-MP5110U/DPX-MP4110/DPX-MP3110
Contents
The "AAC" logo is trademark of Dolby Laboratories.
Playing AAC, MP3, and WMA data
This document refers to AAC, MP3, and WMA data
stored in USB device, and CD-R/RW as "audio files".
Refer to the section on "Audio Files" to control these
data. See <About Audio file> (page 18) for details.
Before use
3
Basic Operation
4
General functions
Tuner functions
Disc & Audio file play functions
Cassette play functions
General Operation
7
Audio Control
Adjusting the detail of Audio Control
Audio Setup
Speaker Setting
Sound Enhancer Select
Sound Enhancer Control
Spectrum Analyzer Select
Illumination Color Select
User Color Setting
Display Switching
Tuner Operation
11
Auto Memory Entry
Direct Access Tuning
Frequency Step Setting
Music disc/Audio file Operation
12
Play Functions of Disc Changer
Direct Music Search
Direct Disc Search
List Select
Track Select
Cassette Operation
13
DPSS with the Remote control
Menu Operation
14
Menu System
Security Code
Manual Clock Adjustment
Auxiliary Input Display Setting
Demonstration mode Setting
Basic Operations of remote control 16
Appendix
18
Accessories/ Installation Procedure 20
Connecting Wires to Terminals
21
Installation
22
Troubleshooting Guide
23
Specifications
25


background image
English
|
3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
· To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 16).
How to reset your unit
· If this unit or the connected unit (disc auto changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
· Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
· If you experience problems during installation,
consult your Kenwood dealer.
· When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
· The characters which can be displayed by this unit
are A-Z 0-9 @ " ` ` % & * + ­ = , . / \ < > [ ] ( ) : ; ^ - { } |
~ .
· The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
· Do not touch the recording surface of the CD.
· Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
· Do not use disc type accessories.
· Clean from the center of the disc and move
outward.
· When removing CDs from this unit, pull them out
horizontally.
· If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
· CDs that are not round cannot be used.
· CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
· This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
· You cannot play a CD-R or CD-RW that has not been
finalized. (For the finalization process refer to your
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)


background image
4 | DPX-MP5110U/DPX-MP4110/DPX-MP3110
General functions
Power/Source Select button
[SRC]
Turns on the power.
When the power is on, the source switches between
Tuner ("TUNER") , Tape** ("TAPE") , USB* ("USB"),
CD ("CD") , Auxiliary input ("AUX"), and Standby
("STANDBY") each time this button is pressed.
Press at least 1 second to turn off the power.
* Function of DPX-MP5110U.
** Function of DPX-MP4110.
/
· When the power is ON, the <Security Code> (page 14) is
displayed as "Code On" or "Code Off".
· For whether USB devices can be connected, refer to <About
Audio file> (page 18).
· When an optional accessory is connected, the source name
for each device appears.
Volume control
Control knob
Turn the knob to adjust the volume.
Attenuator
[ATT]
Turning the volume down quickly.
Auxiliary input
Auxiliary input
Connect a portable audio device with mini-plug cable
(3.5 ø).
/
· Use the mini-plug cable which is stereo type and does not
have any resistance.
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the audio
system is paused.
When the call ends, "CALL" disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output
Control knob
Switches between ON ("SW On") and OFF ("SW
Off") each time pushing toward down for at least 2
seconds.
Tuner functions
Band select
Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Tuning
Control knob
Changes the frequency when pushing toward left or
right.
/
· During reception of stereo stations the "ST" indicator is ON.
Preset memory
[1] - [6]
Memorize the station selected when pressing for at
least 2 seconds.
Preset tuning
[1] - [6]
Recalls the memorized station.
[SRC]
[M.JOG]
[SE]
[1]
[2]
[3]
[4]
[5]
[6]
[ATT]
[
]
[ ]
[COL]
Basic Operation
DPX-MP5110U
Display
Control knob
USB Terminal
Disc slot
DSI indicator
Auxiliary input


background image
English
|
5
Disc & Audio file play functions
Disc play
Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the
indicator is ON.
/
· 3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
USB device play
USB Terminal
Connect the USB device to the USB cable (optional
accessory) which is connected to the USB terminal.
When the USB device is connected, the
indicator
is ON.
/
· For the playable audio file, media, and devices, refer to
<About Audio file> (page 18).
Pause and play
[
38]
Switches between pause and play each time this
button is pressed.
Disc ejection
[
0]
/
· You can eject the disc for 10 minutes after switching off the
engine.
USB device removing
[
0]
Press this button for 2 seconds and longer to select
the remove mode, and the remove the USB device.
During the remove mode, "Remove" is displayed.
Music search
Control knob
Changes the music when pushing toward left or right.
Fast reverses or forwards the music while keeping
pushing toward left or right. (No sound is output
while playing audio file.)
Folder search
Control knob
Changes the folder containing the audio file when
pushing toward up or down.
Select mode
[M.JOG]
After pressing this button, you can quickly search
songs with the control knob. See <List Select> (page
12) for details.
Track/ File/ Folder repeat play
[4]
Switches between Track Repeat ("TRAC REP") and OFF
("REP Off") when pressed while playing a CD.
Switches between File Repeat ("File REP"), Folder
Repeat ("FOLD REP"), and OFF ("REP Off") when
pressed while playing an audio file.
Scan play
[2]
Successively plays the intro of the music in the disc or
folder.
When Scan Play is turned on, "TRAC SCN"/ "File SCN" is
displayed.
Random play
[3]
Randomly plays the music in the disc or folder.
When Random Play is turned on, "Disc RDM"/ "FOLD
RDM" is displayed.
Text/Title scroll
Control knob
Scrolls the CD and audio file text display when
pushing toward up for at least 2 seconds.
: Indicates the button etc. to operate.
Next page
3