KENWOOD C-707I - Owner's Manual Immediate Download

C-707I

LIFE STYLE HI-FI COMPONENT SYSTEM

INSTRUCTION MANUAL

Decla

Declaration of Conformity with regard to

the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representative's:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

This model consists of a main unit (RD-C707) and a pair of speakers (LS-C707).

en01_c-707i.indd 1

1/10/2008 9:48:51 AM

C-707I

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,

IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS

VOLTAGE"WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT

THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)

INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

The marking of products using lasers

The marking this product has been classified as Class 1. It means that

there is no danger of hazardous radiation outside the product.

Location: Back panel

CLASS 1

LASER PRODUCT

Safety Precautions

Before Applying Power

Caution: Read this page carefully to ensure safe operation.

Units are designed for operation as follows.

Australia .....................................................AC 240 V only

Europe ........................................................AC 230 V only

en01_c-707i.indd 2

1/10/2008 9:48:52 AM

English

accessory recommended by the

manufacturer.

A product and cart combination

should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the product and cart

combination to overturn.

5. Ventilation

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from overheating,

and these openings must not be blocked or

covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or

other similar surface. This product should not be

placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

6. Power Sources

This product should be operated only from the

type of power source indicated on the product.

If you are not sure of the type of power supply to

your home, consult your product dealer or local

power company.

7. Polarization

This product may be equipped with a polarized

alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

IMPORTANT SAFETY INSTRUCTIONS

Caution: Read this page carefully to ensure safe operation.

Read Instructions

All the safety and operating instructions should

be read before the product is operated.

Retain Instructions

The safety and operating instructions should be

retained for future reference.

Heed Warnings

All warnings on the product and in the

operating instructions should be adhered to.

Follow Instructions

All operating and use instructions should be

followed.

1. Cleaning

Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

2. Attachments

Do not use attachments not recommended

by the product manufacturer as they may cause

hazards.

3. Water and Moisture

This product shall not be exposed to dripping

and splashing for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool; and the like.

Do not place an object containing liquid, such as

a flower vase, on the appliance.

4. Accessories

Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may

fall, causing serious injury to a child or adult, and

serious damage to the product. Use only with a

cart, stand, tripod, bracket, or table recommended

by the manufacturer. Any mounting of the

product should follow the manufacturer's

instructions, and should use a mounting

Continued to next page

Safety Precautions

en01_c-707i.indd 3

1/10/2008 9:48:52 AM

C-707I

8. Power Cord Protection

Power-supply cords should be routed so that

they are not likely to be walked on or pinched

by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from

the product.

9. Lightning

For added protection for this product during

a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it

from the wall outlet and disconnect the antenna

or cable system. This will prevent damage to the

product due to lightning and power-line surges.

10. Overloading

Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result

in a risk of fire or electric shock.

11. Object and Liquid Entry

Never push objects of any kind into this product

through openings as they may touch dangerous

voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any

kind on the product.

12. Servicing

Do not attempt to service this product yourself

as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

13. Damage Requiring Service

Unplug this product from the wall outlet and

refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is

damaged,

b) If liquid has been spilled, or objects have

fallen into the product,

c) If the product has been exposed to rain or

water,

d) If the product does not operate normally

by following the operating instructions.

e) If the product has been dropped or

damaged in any way, and

f) When the product exhibits a distinct

change in performance this indicates a

need for service.

g) If an abnormal smell or smoke is detected.

14. Replacement Parts

When replacement parts are required, be sure

the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or

other hazards.

15. Safety Check

Upon completion of any service or repairs to

this product, ask the service technician to perform

safety checks to determine that the product is in

proper operating condition.

16. Wall or Ceiling Mounting

This product should be mounted to a wall

or ceiling only as recommended by the

manufacturer.

17. Heat

This product should be situated away from heat

sources such as radiators, heat registers, stoves, or

other products that produce heat. Do not place a

flaming object, such as a candle or lantern, or near

the product.

18. Power Lines

An outside antenna system should not be

located in the vicinity of overhead power lines

or other electric light or power circuits, or where

it can fall into such power lines or circuits. When

installing an outside antenna system, extreme

care should be taken to keep from touching such

power lines or circuits as contact with them might

be fatal.

IMPORTANT SAFETY INSTRUCTIONS

Safety Precautions

en01_c-707i.indd 4

1/10/2008 9:48:52 AM

English

19. Outdoor Antenna Grounding

If an outside antenna or cable system is

connected to the product, be sure the antenna

or cable system is grounded so as to provide

some protection against voltage surges and

built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of

the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding

electrode.

Information on Disposal of Old Electrical

and Electronic Equipment (applicable for

EU countries that have adopted separate

waste collection systems)

Products with the symbol (crossed-

out wheeled bin) cannot be

disposed as household waste.

Old electrical and electronic

equipment should be recycled at

a facility capable of handling these

items and their waste byproducts.

Contact your local authority for details in

locating a recycle facility nearest to you.

Proper recycling and waste disposal will

help conserve resources whilst preventing

detrimental effects on our health and the

environment.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

GROUND CLAMPS

Notes:

1. Item 7 is not required except for grounded or

polarized equipment.

2. Item 19 complies with UL in the U.S.A.

Safety Precautions

en01_c-707i.indd 5

1/10/2008 9:48:53 AM