background image
Minidisc Player Unit
· Do not alter or remodel the unit as this can cause malfunctioning.
· Do not alter or impact the unit as this may damage it.
· Avoid using the unit in the following locations since they can cause malfunctioning.
1. Bathrooms and other moisture-prone places.
2. Warehouses and other dusty places.
3. Very hot places near heating appliances, etc.
· Do not leave the unit exposed to direct sunlight for long periods of time as this may deform
or discolor the cabinet and may also cause malfunctioning.
Precautions for listening with the headphones
· Do not play your headset at a high volume. Hearing experts advise against continuous ex-
tended play.
· If you experience a ringing in your ears, reduce volume or discontinue use.
· Do not use while operating a motorized vehicle. It may create traffic hazard and is illegal in
many areas.
· You should use extreme caution or temporarily discontinue use in potentially hazardous
situations.
· Even if your headphones are an open-air type designed to let you hear outside sounds, don't
turn up the volume so high that you can't hear what's around you.
When driving a car
· In the interest of traffic safety, do not use the minidisc player while driving a vehicle.
Battery Indicator
The battery indicator appears on the remote control display. When the indicator appears as be-
low, power will be shut off a short while after.
Rechargeable battery: Recharge it.
Dry-cell batter
y: Replace it with new one.
Notes:
· The battery indicator appears when an MD is loaded into the minidisc player.
· The battery indicator also appears when the AC adaptor is used. However, this no meaning.
PORTABLE MINIDISC PLAYER
ENGLISH
XM-PX5WT/SL
*Use numbers indicated in parentheses when asking for replacement parts.
AC adaptor (AA-R9020)
1 pc.
Headphones
1 pc.
Wired remote control
1 pc.
Charger/adaptor (AC-R124)
1 pc.
Supplied Accessories
Check the packing carton for these accessories.
Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain opti-
mum performance and a longer service life from your minidisc player.
INSTRUCTIONS
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE
OF
PROCEDURES
OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Rechargeable nickel metal hydride battery (BN-R1210)
1 pc.
Dry-cell battery case
1 pc.
Carrying pouch
1 pc.
AC Plug Adaptor (except for Hong Kong)
1 pc.
Using the rechargeable Ni-MH battery (included)
1 Remove the rechargeable battery from its case.
2 Insert the rechargeable battery into the charger/adaptor.
3 Set the switch on the charger/adaptor to "CHARGER".
4 Connect the AC adaptor to the charger/adaptor.
5 The charge indicator will initially light red. It will go out when recharg-
ing is completed. When recharging is complete, unplug the AC adap-
tor from the AC outlet and the charger/adaptor.
6 Remove the recharged battery from the charger/adaptor and insert
it into the minidisc player.
Notes:
· You cannot use the MD player while charging the rechargeable battery.
· It takes approximately 2 hours to recharge the rechargeable battery.
· The rechargeable battery has a service life of approximately 300 charge-discharge cycles. If
the operating time on one full charge becomes noticeably shorter than it used to be, the bat-
tery has reached the end of its service life and should be replaced.
· The AC adaptor and rechargeable battery may become warm while recharging. This is not a
malfunction.
· When recharging the rechargeable battery which was left unused for a long time, the charge
indicator may not light immediately. It will light in a few minutes.
Refer to the specifications for information on operating time durations when using a recharge-
able battery, dry-cell battery, a or both together.
Using the AC adaptor
CAUTION: "Be sure there is no battery in the minidisc player or in the
dry-cell battery case."
1 Attach the battery case to the minidisc player.
Turn the knob on the battery case toward "LOCK" until it stops. (To detach the battery
case, turn the knob toward "RELEASE" until the battery case comes loose.)
2 Set the switch on the charger/adaptor to "ADAPTOR".
3 Connect the AC adaptor to the charger/adaptor, and the charger/
adaptor to the battery case.
Notes:
· The minidisc player is in a standby mode when the AC adaptor and charger/adaptor are connected.
· The primary circuit is "live" as long as the AC adaptor is connected to an electrical outlet.
Cautions
Batteries
· Before replacing batteries, always turn the minidisc player off.
Rechargeable Ni - MH battery :
· Use only the rechargeable battery BN-R1210 (supplied) or BN-R127 (not supplied) with this
minidisc player.
· If the power delivered by the battery lasts for a very short time after recharging, it means
that the battery's service life is over. Do not use it any more.
· Recharging an already charged battery will shorten its service life.
· When recharging a battery for the first time, or when it has not been used for a long period
of time, the play time may be shorter than usual. In a case like this, repeatedly recharge and
discharge the battery. This will restore it to its regular state.
· Do not allow any metal objects to touch the terminals of the rechargeable battery because
this may cause dangerous short-circuiting.
· Recharge the battery at a temperature of 10°C to 35°C.
Dry cell battery and rechargeable battery:
To prevent damage to the batteries, and to avoid electrolyte leakage, heed the following instructions.
· Align the
ª and · polarities properly when inserting the batteries.
· Remove the batteries if you do not plan to use the minidisc player for a long period of time.
· Do not expose the batteries to open flame, and do not short-circuit, disassemble, or subject
them to excessive heat.
· Do not attempt to recharge dry cell batteries.
Carrying batteries:
· When putting dry cell or rechargeable batteries in a pocket or bag, ensure that no other metal
objects, such as necklaces or coins, are placed together with them. Contact with metal may
cause short-circuiting which, in turn, may cause a fire.
· Be absolutely sure to carry the rechargeable battery in the battery carrying case.
Recycling Notice
The rechargeable battery is designated recyclable.
Please follow your local recycling regulations.
AC adaptor and charger/adaptor
· Handle the AC adaptor and charger/adaptor carefully. Improper handling is dangerous.
· Do not touch them with wet hands.
· Do not place heavy objects on top of them.
· Do not forcibly bend them.
· Be sure to use only the AC adaptor and charger/adaptor provided with this minidisc player.
· Disconnect the AC adaptor from the power outlet if the unit is not going to be used for a
long time.
Power Supply Preparations
A VOLUME and SKIP / SEARCH button
B HOLD / SEARCH/
VOLUME Mode switch
C Headphones jack ( )
D Stop / Play / Pause button (73 /8)
E OPEN switch
F HOLD switch
G Display
Location of Controls
H Play / Pause button (3/8)
I VOLUME button (+, ­)
J Skip / SEARCH button (4¢ )
K DISP. (Display) button
L P.MODE(Play mode) button
M A.C.BASS (Active Clear Bass)
button
N Stop button (7)
[Indicators on the remote control display]
AC adaptor
Charge indicator
Charger/Adaptor
CLASS
1
LASER
PRODUCT
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when
open and interlock failed or defeated.
Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover.
There are no user serviceable parts
inside the Unit; leave all servicing to
qualified service personnel.
LVT0487-007A [UB/US]
Using a dry-cell battery (not included)
CAUTION: Do not use a dry-cell battery together with the AC adaptor.
1 Open the lid of the battery case and insert a LR6 (UM-3) alkaline battery into the bat-
tery compartment.
2 Attach the battery case to the minidisc player. (See "Using the AC adaptor".)
Note:
· To lengthen battery life, you can use both the rechargeable battery and a dry-cell battery at
the same time.
Accidental Operation Prevention Function (Hold
Mode)
This function prevents the minidisc player from operating accidentally.
Both the minidisc player and the remote control have HOLD switches, each of which works
independently.
Rotate the remote control switch in the direction shown by the arrow to
activate the HOLD mode.
When the minidisc player is in HOLD mode, no button operation is possible for either the
minidisc player unit or its remote control.
To operate the minidisc player or remote control normally
, switch off the HOLD mode.
Note:
· When HOLD is released on the remote control, "HELLO" will be displayed in the display
windows, and the music number and its play time will be displayed.
To AC power outlet
Slide the cover and
open it.
Insert the battery with its
positive terminal facing
out.
[Minidisc Player Unit]
Disc indicator
Repeat
BASS
Random
Battery
DC
IN
1.5
V
RE
LE
AS
E
LO
CK
D
C
IN
1
.5
V
Battery case
If the rubber holder on the remote control clip comes off
Insert the clip into the rubber holder, then rotate the clip.
Rechargeable battery
Rechargeable battery
Charger/Adaptor
(turn)
[Remote Control]
DISP. P.MODE
VOLUME
SEARCH
A.C.BASS
C
ED
BA
I
L
J
G
K
H
F
M
N
[Remote control]
turn
Headphones cord
Rubber holder
Clip
Difference in design
depends on the color
selection.
Knob
RE
LE
AS
E
LO
CK
D
C
IN
1
.5
V
Battery case
To AC power outlet
Battery case
OP
EN
OPE
N
DC
IN
1.5V
AC adaptor
Charger/Adaptor
WARNING LABEL,
PLACED INSIDE
THE UNIT
CAUTION:
AC adaptor (AA-R9020), Charger/Adaptor
(AC-R124) and rechargeable Ni-MH bat-
tery (BN-R1210 and BN-R127) are audio
equipments for XM-PX5 only.
Firmly close the cover.
HOLD
VOLUME
SEARCH
[Unit]
Mono
XM-PX5[U](Eng.)
99.11.19, 5:11 PM
1


background image
Operation
Fast forward/
Reverse
Button
Skip function
Press during play back or while in Stop mode.
Search function
Keep depressed during play.
Button
Operation
To pause play
To stop play
To turn off the unit
(Off mode)
· During Random Play, the skip but-
tons cannot be used to skip back to
tracks that were played previously
in the random sequence.
Press during play.
Press again to restart play.
If paased for 2 minutes, the power will
automatically shut off.
Display/Reference
or
Blinks
Press the
3/8 button again to restart play (Re-
sume Play). The current track will be played
from the beginning (see "Resume Play").
If stopped for 45 seconds, the power will
automatically shut off.
When all the music is played, the MD
player automatically stops.
or
Display/Reference
Repeat Play and Random Play
You can select either Repeat Play or Random Play. In Repeat Play, you can repeat all the
tracks, or an individual track, as many times as you like. In Random Play, you can play all the
tracks in random order.
Selecting Repeat Play and Random Play in Stop mode
In Stop mode, press the P.MODE button. Each time you press the button, the play mode
changes as follows:
P1 = P = RND = P1 RND = P RND = Original display = (back to the beginning)
P1
: Repeats 1 track.
P
: Repeats all the tracks.
RND
: Random play
P1 RND : Repeats one track randomly selected.
P RND : Repeats all the tracks in random order.
After selecting one of the above modes, press the
3/8 button.
To exit Repeat Play or Random Play,
stop the MD and then press the P.MODE button until
the display returns to its original setting.
Repeat Play during Playback
During Normal Play:
Each time you press the P.MODE button, the play mode changes as follows:
P1 = P = Original display = (back to the beginning)
Select "
P1" to repeatedly play the current track. Select "P" to repeat all the tracks.
During Random Play:
Each time you press the P.MODE button, the play mode changes as follows:
P1 RND = P RND = Original display = (back to the beginning)
Select "
P1 RND" to repeatedly play a randomly selected track. Select "P RND" to repeat all
the tracks in random order.
To exit Repeat Play or Random Play,
stop the MD and then press the P.MODE button until
the display returns to its original setting.
Selecting the Operational Options of Remote Control
Notes:
· Since the insertion direction of the car audio cassette adaptor is limited, be sure that it can be
inserted into the cassette slot of your car audio system.
· Depending on the vehicle used, noise may occur. In this case, it is recommended to connect a noise
filter (available on the market) between the remote control and the car audio cassette adaptor.
· If your car audio system is equipped with a LINE IN or AUX IN jack, you can connect the
output of the remote control to the jack using a stereo mini plug signal cord (not supplied).
In this case, you do not need the optional car audio cassette adaptor.
Troubleshooting Guide
Before requesting service for this minidisc player, check the chart below for a possible cause of
the problem you are experiencing. Some simple checks, or a minor adjustment on your part,
may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do
not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this
minidisc player), or consult your dealer for instructions.
Problem
Does not operate.
Cannot play the MD.
Tracks on MD do not play in or-
der, starting with the first track.
Cannot hear music--too noisy.
TV picture is distorted.
Radio reception is noisy.
Power is not turned on.
Charging indicator does not light
during charging.
Check this
Is the MD loaded? If unloaded, "No Disc" will appear on
the display.
· Is the HOLD switch released?
· Is the battery low?
· Is there moisture condensation on the lens?
(Wait for about an hour and then try again.)
· Is the Repeat Play or Random Play selected?
· You stopped or turned off the power while playing. It
changed to Resume Play.
· Is the headphone plug inserted all the way?
· Is the plug dirty? (Wipe away dirt on the plug.)
· Is music recorded on the MD? If not, "BLANK" will
appear on the display.
· Is the unit too near a TV or tuner? (If the TV or tuner is
connected to a simple indoor antenna, connect it to an
outdoor antenna.)
· With both HOLD switches activated, the battery was
changed during playback. (Release both HOLD switches
and try to operate again.)
· Is the charger too hot?
(If so, disconnect the AC adaptor and leave the charger
for a while.)
Maintenance
Unit:
Wipe the unit and remote control with a soft cloth. Remove stubborn dirt using a cloth which
has been dipped in water (or soapy water) and wrung out. Then wipe them dry.
· If you intend to use a chemically treated cleaning cloth, read its directions first.
· Do not use alcohol or paint thinners.
MDs:
If the MD cartridge is dirty wipe it with a damp cloth and then wipe dry.
When storing MDs, avoid locations which are
· Exposed to direct sunlight.
· Susceptible to high levels of humidity or dust.
· Directly exposed to heat from a heating appliance.
· On top of a car dashboard or near the rear window.
Handling the MDs
· Do not open the shutter. The shutter is usually locked to prevent opening. Do not force in to
open, or the disc may be destroyed.
Specifications
Portable MINIDISC player
Type
: Minidisc digital audio system
Sampling frequency
: 44.1 kHz
Compression/expansion
method
: ATRAC method
Number of channels
: 2 channels (stereo)
Frequency response
: 20 Hz to 20,000 Hz
Wow & flutter
: Unmeasurable
Output
: Headphone (3.5 mm dia. stereo
× 1)
5 mW/ch at 10% THD/16 ohms to 47 kohms
Duration of battery
: Approx. 21 hours when using a rechargeable battery
(BN-R1210) charged for 2 hours ;
Approx. 33 hours when using an alkaline battery (LR6) ;
Approx. 60 hours when using a rechargeable battery and
alkaline battery together
* Above duration may differ depending on the ambient tempera-
ture and conditions.
Power requirements
: DC 1.2 V (rechargeable battery), DC 1.5 V (R6 size battery)
DC IN 1.5 V
Dimensions (L
× W × H) : 72.0 mm × 15.1 mm × 78.9 mm
(Excluding buttons and controls)
Mass
: Approx. 63 g (without battery)
AC adaptor (AA-R9020)
Charger/adaptor (AC-R124)
Input power source : AC 110-AC 230 V,
Input power source
: DC 9 V, 0.5 A
50 Hz/60 Hz
Output voltage
: DC 9 V, 0.5 A
Output voltage
: DC 1.5 V, 0.7 A
Design and specifications are subject to change without notice.
US and foreign patents licensed from Dolby Laboratories Licensing Corporation.
Muting the pip tone
When you press a button on the remote control except for the A.C.BASS and VOLUME (+, ­)
buttons, a pip tone is emitted.
To mute the pip tone,
while pressing the A.C.BASS button in Stop mode or during playback,
press the P.MODE button. "BEEP OFF" appears on the remote control display.
To resume the pip tone,
do the same operation again. "BEEP ON" will appear on the display.
Using the Minidisc Player with Optional Accessories
Using the minidisc player with an audio system
You can listen to MDs through your audio system.
· After turning off the amplifier, plug a stereo connection cable (not supplied) into the head-
phones jack as shown below.
· Adjust the volume of the minidisc player to an appropriate level.
· Adjust the volume level on the amplifier.
· Use the unit's buttons for operation. (The remote control will issue a Pip tone.)
· Direct connection without passing through the remote control may generate noise.
Using the minidisc player with a car audio system
You can listen to an MD through your car audio system. The following accessories are avail-
able for your car audio system.
· Car adaptor (CA-R153)
· Car audio cassette adaptor
EN, CH
J
VC
(Stop mode)
Normal Play
Follow the numbers in the figure to the right.
1 Connect the headphones plug firmly.
2 Connect the remote control plug firmly.
3 Make sure the switches on the unit and remote control are not on
HOLD setting.
4 Load an MD.
· Slide the OPEN switch to open the lid.
· Open the lid by hand.
· Insert the MD into the MD slot beneath the lid, with its label side facing up. Insert the
MD until it stops. Be sure the
% or ] mark on the MD aligns as shown in the figure.
· Close the lid.
"HELLO" appears on the remote control display. Then the track number and playback
time appear.
5 Adjust the volume level between 0 and 25.
Press the Volume (+, ­) button on the unit or the remote control.
6 Press the 38 button.
Playback starts from the first track and ends after playing all the tracks on the MD.
Notes:
· Insert the MD in the way that it will not touch the catch. If the catch is bent for some reason,
the lid may not be closed properly.
· When opening the lid, please hold it by the edge when an MD is already loaded.
· If no MD is loaded, "No Disc" appears on the display, and the power will automatically shut
off after approx. 10 seconds.
· If the MD is recorded in Monaural mode, "MONO" will appear on the display.
· To eject the MD, slide the OPEN switch and open the lid by hand. The MD will then come out.
· When the remote control is connected, the power may automatically turn on. However, if
left as it is, it will eventually turn off automatically.
· This MD Player has a 40 second sound-skip-guard memory function to accomodate any
shocks. Consequently, it can be used while walking.
CAUTION:
Before connecting the car adaptor, remove the rechargeable battery from the unit and
the alkaline battery from the battery case.
· Connect the car adaptor to the battery case as shown below.
· Connect the car audio cassette adaptor to the remote control headphone jack.
The other end connects to the cassette slot of your car.
· Adjust the volume level of the unit to an appropriate level.
ENGLISH
Resume Play
This function allows you to listen from the beginning of the track on which play was stopped
when the minidisc player was set to Stop mode.
Press the
3/8 button.
Showing the Disc Information
Each time you press the DISP. button while in Stop
mode or during playback, the MD's information is
displayed as follows.
In Stop mode:
Disc title*
= Total number of tracks and total playback time of the MD = Track title* = Play-
back time
= (back to the beginning)
During Playback:
Playing time
= Track title* = (back to the beginning)
*The disc title or track title will scroll if it consists of 7 characters or more. If no title is given,
" ~" appears on the display. (Up to 80 characters can be displayed.)
The disc indicator rotates
Number of tracks being played
Playing time
[Remote control]
[Unit]
[Unit]
[Remote control]
DISP. button
6
HOLD
VOLUME
SEARCH
DISP.
P.MODE
VOLUME
SEARCH
DISP.
P.MODE
VOLUME
SEARCH
HOLD
VOLUME
SEARCH
A.C.BASS
Stereo connection
cable (not supplied)
Amplifier
or
Car adaptor (CA-R153)
Car audio cassette
adaptor (3.5 mm dia.
stereo plug)
Battery case
Changing the display character contrast
The character display contrast can be adjusted when the characters become less clear due to
ambient temperature or during scrolling.
While pressing the A.C.BASS button in Stop mode or during playback, press the SEARCH but-
ton.
Adjustment can be made between LCD00 and LCD15. While the SEARCH button is pressed,
the contrast will be changed continuously. The initial setting is "LCD07."
Contrast is up
Contrast is down
[Remote control]
[Unit]
A.C. BASS button
Reinforcing the Bass Sound (A.C.BASS)
Press the A.C.BASS button to activate the active clear bass function.
The "BASS" indicator appears on the remote control display. The bass level is now automati-
cally controlled in conjunction with the sound volume.
Each time you press the A.C.BASS button the playmode changes as follows:
A.C.BASS
= TRAIN* = OFF
* TRAIN mode reduces the amount of sound leaking from the headphone.
Note:
· When the A.C.BASS button is pressed together with the P.MODE button or SEARCH button,
the set mode will change. When this happens, set the A.C.BASS mode again.
Put the labeled side up.
4
3
5
1
turn
MD Messages:
Messages
Meaning
Action
DISC ERROR
There is a problem (damage) with the disc.
Replace the disc.
READ ERROR
Cannot read data.
Remove the MD and
reinsert it.
In play mode, press for 1 second or more.
The power is shut off after "BYE" ap-
pears on the display.
To turn on the unit, press the
3/8 button.
or
(Blank)
[Unit]
[Remote control]
HOLD
VOLUME
SEARCH
3
5
4
2
1199MNMCREOZK
Stops
6
Catch
XM-PX5[U](Eng.)
99.11.19, 5:12 PM
2