background image
INSTRUCTIONS
DOME TYPE NETWORK CAMERA
VN-C625
LWT0248-001A
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No.
VN-C625
Serial No.
VN-C625_In_Cover
05.3.4, 2:14 PM
3


background image
2
Safety Precautions
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE.REFER
SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash wish arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the pres-
ence of uninsulated "dangerous volt-
age" within the product's enclosure that
may be of sufficient magnitude to con-
stitute a risk of electric shock to per-
sons.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important op-
erating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK, DO
NOT
EXPOSETHIS APPLIANCETO RAIN
OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la Class A est
conforme á la norme NMB-003 du Canada.
AVERTISSEMENT:
POUR EVITER LES RISQUES
D'INCENDIE OU D'ELECTRO-
CUTION,
NE
PAS
EXPOSER
L'APPAREIL A L'HUMIDITE OU A LA
PLUIE.
Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.
FOR USA AND CANADA
Information for USA
This device complies with part 15 of the FCC Rules.
Changes or modifications not approved by JVC could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
WARNING (FOR EUROPE):
This is a Class A product. In a domestic environment
this product may cause radio interference in which
case the user may be required to take adequate
measures.
This installation should be made by a qualified
service person and should conform to all local
codes.
This installation shall be in accordance with the
National Electrical Code, ANSI/NFPA 70.
This product shall be powered by a Listed Class
2 power supply only.
Any Mention in this manual of Alarm inputs/
outputs have not been evaluated by UL to be
used for Burglar Alarm Functionality.
C625_p2-24
05.3.17, 5:11 PM
2


background image
3
PORTABLE CART WARNING
(symbol provided by RETAC)
S3125A
IMPORTANT SAFEGUARDS
1.
Read all of these instructions.
2.
Save these instructions for later use.
3.
All warnings on the product and in the operating instructions should be adhered to.
4.
Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
5.
Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
6.
Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool, etc.
7.
Do not place this appliance on an unstable cart, stand, or table. The appliance may
fall, causing serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the
appliance. Wall or shelf mounting should follow the manufacturer's instructions, and
should use a mounting kit approved by the manufacturer. An appliance and cart
combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn.
8.
Slots and openings in the cabinet and the back or bottom are pro-vided for ventila-
tion, and to insure reliable operation of the appliance and to protect it from over-
heating, these openings must not be blocked or covered.The openings should never
be blocked by placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or heat register. This appliance should not be
placed in a built-in installation such as a bookcase unless proper ventilation is provided.
9.
This appliance should be operated only from the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power company. For
appliance designed to operate from battery power, refer to the operating instructions.
10. This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin).
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding plug.
11. For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
12. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by
persons walking on it.
13. Follow all warnings and instructions marked on the appliance.
14. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
appliance.
16. Do not attempt to service this appliance yourself as opening or removing covers may expose you to danger-
ous voltage or other hazards. Refer all servicing to qualified service personnel.
17. Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the follow-
ing conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions. Adjust only those con-
trols that are covered by the operating instructions as improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the appliance to normal
operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f.
When the appliance exhibits a distinct change in performance - this indicates a need for service.
18. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
19. Upon completion of any service or repairs to this appliance, ask the service technician to perform routine
safety checks to determine that the appliance is in safe operating condition.
These are general IMPORTANT SAFEGUARDS and certain items may
not apply to all appliances.
C625_p2-24
05.3.4, 6:21 PM
3


background image
4
Contents ................................................................................................. 4
Characteristics ....................................................................................... 6
Operating Precautions ........................................................................... 6
Items Included ........................................................................................ 9
Operating Environment .......................................................................... 9
Latest Updates ....................................................................................... 9
Name and Function of Parts ................................................................ 10
Connection Examples .......................................................................... 12
Preparation Procedure ......................................................................... 13
Step 1 Connection/Installation
1-1 Connecting Cables ..................................................................... 14
1. Connection Procedure ............................................................. 14
2. Connection to Alarm Input/Output Terminal ............................. 16
3. Connection of LAN Cables ....................................................... 17
4. Connection of Coaxial Cables .................................................. 18
5. Connection of Conveter Unit .................................................... 19
1-2 Attachment of Ceiling Mount ...................................................... 20
1-3 Inserting the CF card ................................................................. 22
1-4 Installing the Camera ................................................................. 23
Step 2 Network Settings
2-1 Installing the Software ................................................................ 25
2-2 Setting PC's IP Address [Windows XP] ..................................... 26
Setting PC's IP Address [Windows 2000] .................................. 28
2-3 Setting IP Address for this Camera Using the "VN-C625U Setup Tool" .. 30
2-4 Other Settings Using the "VN-C625U Setup Tool" ..................... 32
1. Password Setting ..................................................................... 33
2. Multicast ................................................................................... 34
3. Alarm Setting ........................................................................... 36
4. Recording Setting .................................................................... 42
5. Private Mask Setting ................................................................ 44
6. Motor Limit Setting ................................................................... 45
7. Motion Detection Setting .......................................................... 46
8. Web .......................................................................................... 48
9. FTP Server ............................................................................... 49
10. FTP Client Setting .................................................................... 50
11. Black & White Setting ............................................................... 52
12. Time Setting ............................................................................. 54
13. Memory Information ................................................................. 55
14. Auto Return Setting .................................................................. 55
2-5 Registering Connected Camera Using the "V.Networks Controller" . 56
Introduction
Contents
Preparation
Settings
(VN-C625U Setup
Tool)
Introduction
Thank you for purchasing this product.
(These instructions are for VN-C625U.)
Before beginning to operate this unit, please read the instruction manual carefully in
order to make sure that the best possible performance is obtained.
C625_p2-24
05.3.4, 6:21 PM
4


background image
5
Step 3 Setting Using the V.Networks Controller
3-1 Starting Up the V.Networks Controller ....................................... 58
3-2 Features that Allow Setting Using the V.Networks Controller .... 59
3-3 Motion Detection Standby .......................................................... 61
3-4 Image Size and Inversion .......................................................... 62
3-5 Image Quality Setting ................................................................ 63
3-6 Frame Rate ................................................................................ 67
3-7 Preset Position Setting ............................................................... 68
3-8 Alarm Setting ............................................................................. 69
3-9 Pan/Tilt Setting ........................................................................... 71
3-10
Auto Pan Setting ..................................................................... 72
3-11
Auto Patrol Setting .................................................................. 74
3-12
Auto Trace Setting .................................................................. 76
3-13
Time Stamp ............................................................................ 78
3-14
Changing Registered Information .......................................... 79
Step 4 Operating Using the V.Networks Controller
4-1 Features that Allow Operation Using the V.Networks Controller .. 80
4-2 Record/Stop ............................................................................... 82
4-3 Playback .................................................................................... 83
4-4 Cautions on Record/Play Functions ........................................... 85
4-5 Snapshot .................................................................................... 86
Step 5 Operating Using a Web Browser
5-1 Operating Environment .............................................................. 87
5-2 Access Authorization Level ........................................................ 88
5-3 Starting Up the Web Browser .................................................... 89
5-4 Setting Using the Web Browser ................................................. 90
1. Other Settings .......................................................................... 92
2. Control ..................................................................................... 95
3. Image Setting ........................................................................... 96
4. PAN/TILT Setting ...................................................................... 98
5. Position Memory Setting .......................................................... 99
6. View Setting ........................................................................... 100
7. Alarm Setting ......................................................................... 101
8. FTP Setting ............................................................................ 103
9. Auto Pan Setting .................................................................... 105
10. Auto Patrol Setting ................................................................. 106
11. Auto Trace Setting .................................................................. 107
12. Black & White Setting ............................................................. 108
13. Schedule Setting .................................................................... 108
14. Private Mask Setting .............................................................. 109
15. Limit Setting ........................................................................... 110
16. Auto Return Setting ................................................................ 111
5-5 Viewing Still Images ................................................................. 112
5-6 Viewing Live Images ................................................................ 113
5-7 Image Link ............................................................................... 114
Troubleshooting .................................................................................. 115
Specifications ..................................................................................... 117
Operation
(V.Networks
Controller)
Operation
(Web Browser)
Others
Settings
(V.Networks
Controller)
C625_p2-24
05.3.9, 3:20 PM
5