MICRO COMPONENT SYSTEM
UX-P550
--Consists of CA-UXP550 and SP-UXP550
INSTRUCTIONS
GVT0130-003A
[B]
SUPER VIDEO
Cover[B].fm Page 1 Tuesday, February 17, 2004 10:22 PM
G-1
Warnings, Cautions and Others
CAUTION--STANDBY/ON
button!
Disconnect the mains plug to shut the power off completely
(all lamps and indications go off). The STANDBY/ON
button in any position does not disconnect the mains line.
· When the unit is on standby, the STANDBY/ON lamp lights in
red.
· When the unit is turned on, the STANDBY/ON lamp lights in
green.
The power can be remote controlled.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open
and interlock failed or defeated. Avoid direct exposure to
beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED
INSIDE THE UNIT.
IMPORTANT for the U.K.
DO NOT cut off the mains plug from this equipment. If the
plug fitted is not suitable for the power points in your home
or the cable is too short to reach a power point, then obtain
an appropriate safety approved extension lead or consult
your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted.
If nonetheless the mains plug is cut off ensure to remove the
fuse and dispose of the plug immediately, to avoid a possible
shock hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then
follow the instructions given below:
IMPORTANT:
DO NOT make any connection to the terminal which is
marked with the letter E or by the safety earth symbol or
coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured in
accordance with the following code:
Blue:
Neutral
Brown:
Live
As these colours may not correspond with the coloured
markings identifying the terminals in your plug proceed as
follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.
CAUTION
· Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get
out.)
· Do not place any naked flame sources, such as lighted
candles, on the apparatus.
· When discarding batteries, environmental problems must
be considered and local rules or laws governing the
disposal of these batteries must be followed strictly.
· Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm
or more.
10 cm
15 cm
1 cm
15 cm
15 cm
1 cm
15 cm
15 cm
Front view
Side view
SP-UXP550
CA-UXP550
SP-UXP550
CA-UXP550
Safty[B1].fm Page 1 Tuesday, February 17, 2004 10:22 PM
1
Contents
Introduction ..................................................... 2
Precautions ......................................................................2
How to Read This Manual...............................................2
Getting Started................................................. 3
Step 1: Unpack ................................................................3
Step 2: Prepare the Remote Control ................................3
Step 3: Hook Up ..............................................................4
Selecting the Video Signal ..............................................6
Changing the Scanning Mode .........................................6
Before Operating the System.......................... 7
Playable Disc Types ........................................................7
Display Indicators............................................................8
Daily Operations--Playback ........................ 10
Listening to the Radio ...................................................11
Playing Back a Disc.......................................................12
Daily Operations--Sound & Other
Adjustments ................................................... 14
Adjusting the Volume....................................................14
Adjusting the Sound ......................................................14
Presetting Automatic DVD Video
Sound Increase Level.................................................15
Changing the Display Brightness ..................................15
Changing the Picture Tone ............................................15
Setting the Clock ...........................................................16
Turning Off the Power Automatically...........................16
Advanced Radio Operations......................... 17
Receiving FM Stations with RDS .................................17
Searching for a Program by PTY Codes .......................17
Switching Temporarily to a Program of Your Choice
Automatically ............................................................18
Unique DVD/VCD Operations..................... 20
Selecting the View Angle .............................................. 20
Selecting the Subtitle Language .................................... 20
Selecting the Audio Track ............................................. 21
Playing Back a Bonus Group ........................................ 21
Special Effect Playback ................................................. 22
Advanced Disc Operations ........................... 23
Programming the Playing Order--Program Play.......... 23
Playing at Random--Random Play............................... 24
Playing Repeatedly ........................................................ 25
Prohibiting Disc Ejection--Child Lock ........................ 25
On-Screen Disc Operations .......................... 26
On-screen Bar Information............................................ 26
Operations Using the On-screen Bar ............................. 27
Selecting Browsable Still Pictures................................. 29
Operations on the CONTROL Screen ........................... 29
Timer Operations .......................................... 31
Setting the Timer ........................................................... 31
Setup Menu Operations ................................ 33
Operating Procedure ...................................................... 33
Restricting the Review--Parental Lock ........................ 37
Additional Information................................. 39
Learning More about This System ................................ 39
Maintenance .................................................................. 40
Troubleshooting............................................................. 41
Language Code List....................................................... 42
Country/Area Codes List ............................................... 43
DVD OPTICAL DIGITAL OUT Signals ..................... 44
Specifications ................................................................ 45
Parts Index ..................................................................... 45
UX-P550[B]TOC.fm Page 1 Tuesday, February 17, 2004 10:15 PM
2
Introduction
Precautions
Installation
· Install in a place which is level, dry and neither too hot nor
too cold--between 5°C and 35°C.
· Install the System in a location with adequate ventilation to
prevent internal heat buildup inside the System.
· Leave sufficient distance between the System and the TV.
· Keep the speakers away from the TV to avoid interference
with TV.
Power sources
· When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
· After starting to heat the room
· In a damp room
· If the System is brought directly from a cold to a warm
place
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
Others
· Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
· If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
How to Read This Manual
To make this manual as simple and easy-to-understand as
possible, we have adapted the following methods:
· Button and control operations are explained as listed in the
table below.
· Some related tips and notes are explained later in the
sections "Additional Information" and
"Troubleshooting," but not in the same section
explaining the operations. If you want to know more
about the functions, or if you have a doubt about the
functions, go to these sections and you will find the
answers.
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
DO NOT handle the AC power cord with wet
hands.
DO NOT disassemble the System since there
are no user serviceable parts inside.
Indicates that you press the button
briefly.
Indicates that you press the button
briefly and repeatedly until an
option you want is selected.
Indicates that you press one of the
buttons.
Indicates that you press and hold the
button for specified seconds.
· The number inside the arrow
indicates the period of press (in this
example, 2 seconds).
· If no number is inside the arrow,
press and hold until the entire
procedure is complete or until you
get a result you want.
Indicates that you turn the control
toward the specified direction(s).
Indicates that this operation is only
possible using the remote control.
Indicates that this operation is only
possible using the buttons and controls on
the main unit.
2 sec.
Remote
ONLY
Main Unit
ONLY
Introduction.fm Page 2 Tuesday, February 17, 2004 10:15 PM
3
Getting Started
Step
1: Unpack
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
· FM antenna (1)
· AM loop antenna (1)
· Remote control (1)
· Batteries (2)
If any item is missing, consult your dealer immediately.
Step
2: Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and ) correctly.
Step 1:Unpack the package and
check the accessories.
Step 2: Prepare the remote control.
Step 3: Hook up the components such
as AM/FM antennas, speakers,
etc. (see pages 4 to 6).
Finally plug the AC power cord.
Now you can operate the System.
· DO NOT use an old battery together with a
new one.
· DO NOT use different types of batteries
together.
· DO NOT expose batteries to heat or flame.
· DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, the remote control will be
damaged from battery leakage.
3
2
1
R6(SUM-3)/AA(15F)
Introduction.fm Page 3 Tuesday, February 17, 2004 10:15 PM