INSTRUCTIONS
TM-A210G
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR
MANUEL D'INSTRUCTIONS : MONITEUR VIDEO COULEUR
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR
COLOR VIDEO MONITOR
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.
Retain this information for future reference.
Pour l'usage du client:
Enter ci-dessous le numéro de série qui est situé sur l'arrière du coffret.
Conserver cette information pour une référence ultérieure.
Model No. :
Numéro de modèle :
TM-A210G
Serial No. :
Numéro de série :
LCT1357-001A-H
Cover_A210GE.p65
03.3.12, 7:02 PM
1
Cover_A210GE.p65
03.3.12, 7:02 PM
2
INSTRUCTIONS
COLOR VIDEO MONITOR
TM-A210G
Thank you for purchasing this JVC color video monitor. Before using it, read and follow all
instructions carefully to take full advantage of the monitor's capabilities.
ENGLISH
EN_TM_A210GE.p65
03.3.12, 7:11 PM
1
2
In order to prevent any fatal accidents caused by misoperation
or mishandling the monitor, be fully aware of all the following
precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this
monitor to rain or moisture. Dangerous high voltages
are present inside the unit. Do not remove the back
cover of the cabinet. When servicing the monitor,
consult qualified service personnel. Never try to service
it yourself.
WARNING : THIS APPARATUS MUST
BE EARTHED.
PRECAUTIONS
÷ Use only the power source specified on the unit.
(120 V AC/220 240 V AC, 50 Hz/60 Hz)
÷ When not using this unit for a long period of time, or when
cleaning it, be sure to disconnect the power plug from the
AC outlet.
÷ Do not allow anything to rest on the power cord. And do not
place this unit where people will tread on the cord. Do not
overload wall outlets or power cords as this can result in a
fire or electric shock.
÷ Avoid using this unit under the following conditions:
in extremely hot, cold or humid places,
in dusty places,
near appliances generating strong magnetic fields,
in places subject to direct sunlight,
in badly ventilated places,
in automobiles with doors closed.
÷ Do not cover the ventilation slots while in operation as this
could obstruct the required ventilation flow.
÷ When dust accumulates on the screen surface, clean it with
a soft cloth.
÷ Unplug this unit from the AC outlet and refer servicing to
qualified service personnel under the following conditions:
when the power cord is frayed or the plug is damaged,
if liquid has been spilled into the unit,
if the unit has been dropped or the cabinet has been
damaged,
when the unit exhibits a distinct change in performance.
÷ Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service
personnel.
÷ When replacement parts are required, have the service
personnel verify in writing that the replacement parts he/
she uses have the same safety characteristics as the
original parts. Use of manufacture's specified replacement
parts can prevent fire, shock, or other hazards.
÷ Upon completion of any servicing or repair work to this unit,
please ask the service personnel to perform the safety
check described in the manufacturer's service literature.
÷ When this unit reaches the end of its useful life, improper
disposal could result in a picture tube implosion. Ask
qualified service personnel to dispose of this unit.
This monitor is equipped with a 3-blade grounding-type
plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
Machine Noise Information Ordinance 3. GSGV,
January 18, 1991: The sound pressure level at the
operator position is equal or less than 70 dB(A)
according to ISO 7779.
Improper operations, in particular alternation of high
voltage or changing the type of tube may result in x-ray
emission of considerable dose. A unit altered in such a
way no longer meets the standards of certification, and
must therefore no longer be operated.
FCC INFORMATION (U.S.A. only)
CAUTION: Changes or modification not approved by
JVC could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
SAFETY PRECAUTIONS
Notice (U.S.A. only)
This product utilizes both a Cathode Ray Tube (CRT) and
other components that contain lead. Disposal of these
materials may be regulated in your community due to
environmental considerations. For disposal or recycling
information please contact your local authorities, or the
Electronics Industries Alliance: <http://www.eiae.org.>
EN_TM_A210GE.p65
03.3.12, 7:11 PM
2
3
CONTENTS
SAFETY PRECAUTIONS ................................................................................. 2
CONTROLS AND FEATURES ......................................................................... 4
HOW TO HANDLE BASIC OPERATIONS ........................................................ 7
HOW TO USE THE MENU FUNCTIONS........................................................... 8
HOW TO INITIALIZE THE SETTING ............................................................... 11
BASIC CONNECTION EXAMPLE .................................................................. 12
TROUBLESHOOTING .................................................................................... 14
SPECIFICATIONS .......................................................................................... 15
SCREEN BURN
÷ It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright
images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does
not occur as far as displaying normal video playback motion images.
Fuse
POWER CONNECTION
The power supply voltage rating of this product is 120 V AC (For U.S.A. and Canada only) and 220 240 V AC (For European
countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the
power cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : 120 V AC
220 240 V AC
220 240 V AC
Countries
: U.S.A. and Canada
European countries
United Kingdom
Warning:
÷ Do not use the same Power Cord for 120 V AC as for 220 240 V AC. Doing so may cause malfunction, electric shock or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver, and
replace the fuse.
(* An example is shown in the illustration.)
ENGLISH
EN_TM_A210GE.p65
03.3.12, 7:11 PM
3