background image
TA/NEWS/INFO
DISPLAY MODE
LVT1507-012A
[US]
RX-5062S
AUDIO/VIDEO CONTROL RECEIVER
INSTRUCTIONS
English
Cover_RX-5062S[US].p65
06.2.2, 14:01
3


background image
G-1
Warnings, Cautions, and Others /
CAUTION
·
Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
·
Do not place any naked flame sources, such as
lighted candles, on the apparatus.
·
When discarding batteries, environmental problems
must be considered and local rules or laws governing
the disposal of these batteries must be followed strictly.
·
Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1.
Do not remove screws, covers or cabinet.
2.
Do not expose this appliance to rain or moisture.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage.
Locate the apparatus as follows:
Front:
No obstructions open spacing.
Sides:
No obstructions in 10 cm from the sides.
Top:
No obstructions in 10 cm from the top.
Back:
No obstructions in 15 cm from the back.
Bottom:
No obstructions, place on the level surface.
In addition, maintain the best possible air circulation as illustrated.
Wall or obstructions
Front
Stand height 15 cm or more
RX-5062S
Spacing 15 cm or more
Floor
[European Union only]
Caution­­STANDBY/ON
button!
Disconnect the mains plug to shut the power off completely (the
STANDBY lamp goes off). When installing the apparatus, ensure
that the plug is easily accessible.
The STANDBY/ON
button in any position does not disconnect
the mains line.
· When the unit is on standby, the STANDBY lamp lights red.
· When the unit is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
Safety_RX-5062S[US].p65
06.2.2, 14:28
1


background image
1
English
Table of Contents
Adjusting Sound ........................................ 21
Basic Adjustment Items ............................................................ 21
Basic Procedure ........................................................................ 21
7 Adjusting the Equalization Patterns ..................................... 22
7 Adjusting the Speaker Output Levels ................................... 22
7 Adjusting the Sound Parameters for the Surround
and DSP Modes .................................................................... 22
Using the Surround Modes .......................... 23
Reproducing Theater Ambience ................................................ 23
Introducing the Surround Modes ............................................. 23
Activating the Surround Modes ............................................... 25
7 Auto Surround Function ....................................................... 25
7 Activating the Surround Modes Manually ........................... 25
Using the DSP Modes ................................ 26
Reproducing the Sound Field ................................................... 26
Introducing the DSP Modes ..................................................... 26
Activating the DSP Modes ....................................................... 27
Operating JVC's Audio/Video Components ... 28
Operating Audio Components .................................................. 28
Operating Video Components .................................................. 29
Troubleshooting ......................................... 30
Specifications ............................................ 31
This mark indicates that ONLY the remote control
CAN be used for the operation explained.
Remote
NOT
This mark indicates that the remote control
CANNOT be used for the operation explained.
Use the buttons and controls on the front panel.
Parts Identification ...................................... 2
Getting Started ........................................... 4
Before Installation ...................................................................... 4
Checking the Supplied Accessories ........................................... 4
Putting Batteries in the Remote Control .................................... 4
Adjusting the Voltage Selector ................................................... 4
Connecting the FM and AM Antennas ....................................... 4
Connecting the Speakers and Subwoofer ................................... 5
Connecting Audio/Video Components ....................................... 6
7 Analog Connections ............................................................... 6
7 Digital Connections ................................................................ 8
Connecting the Power Cord ....................................................... 8
Basic Operations ......................................... 9
Daily Operational Procedure ...................................................... 9
Turning On the Power ................................................................ 9
Selecting the Source to Play ....................................................... 9
Adjusting the Volume ............................................................... 10
Turning On and Off the Subwoofer Sound .............................. 11
Selecting the Analog or Digital Input Mode ............................ 11
Changing the Display Brightness ............................................. 12
Attenuating the Input Signal .................................................... 12
Changing the Source Name ...................................................... 12
Muting the Sound ..................................................................... 13
Using the Sleep Timer .............................................................. 13
Receiving Radio Broadcasts ........................ 14
Setting the AM Tuner Interval Spacing .................................... 14
Tuning in to Stations Manually ................................................ 14
Using Preset Tuning ................................................................. 14
Selecting the FM Reception Mode ........................................... 15
Basic Settings ........................................... 16
Quick Speaker Setup ................................................................ 16
Basic Setting Items ................................................................... 17
Basic Procedure ........................................................................ 17
7 Setting the Speakers ............................................................. 18
7 Setting the Speaker Distance ................................................ 18
7 Setting the Bass Sounds ....................................................... 18
7 Selecting the Main or Sub Channel ...................................... 19
7 Setting for Effective Surround Operations ........................... 20
7 Setting the Digital Input Terminals ...................................... 20
01-08_RX-5062S[US].p65
06.2.2, 16:26
1


background image
2
English
Front Panel
Parts Identification
STANDBY
STANDBY/ON
PHONES
SURROUND
DSP
SPEAKERS
ON/OFF
SUBWOOFER OUT
FM MODE
MEMORY
ON/OFF
FM/AM TUNING
SURROUND/DSP
OFF
DIMMER
MASTER VOLUME
INPUT DIGITAL
RX--6030V AUDIO/VIDEO CONTROL RECEIVER
SETTING
MULTI JOG
PUSH SET
QUICK SPEAKER
SETUP
ADJUST
EXIT
INPUT ANALOG
INPUT ATT
FM/AM PRESET
DVD
VCR
CD
AM
TV SOUND
TAPE/CDR
SOURCE NAME
AUX
FM
3D - PHONIC
DUALMONO
H.PHONE
SB
DSP DIGITAL EQ
INPUT ATT VOLUME
PRO LOGIC
VIRTUAL SB
TUNED STEREO AUTO MUTING SLEEP
96/24
1 2 3 4
5
w
r
t
i
o
;a
d
f
y
e
u
6
7 8 9 p
q
s
Display
3D - PHONIC
DUALMONO
H.PHONE
SB
DSP DIGITAL EQ
INPUT ATT VOLUME
PRO LOGIC
VIRTUAL SB
TUNED STEREO AUTO MUTING SLEEP
96/24
-
$%
!
@
13
24
5 6
7
8
9
0
=
~
#
See pages in parentheses for details.
1 STANDBY/ON
button and STANDBY lamp (9, 14)
2 SURROUND/DSP OFF button (25, 27)
3 DSP button (26 ­ 28)
4 SURROUND button (25)
5 Remote sensor
6 Display (For details, see "Display" below.)
7 Source selection buttons (9, 12)
AUX, DVD, VCR, TV SOUND, CD, TAPE/CDR (SOURCE
NAME), FM, AM
8 INPUT ANALOG button (12)
INPUT ATT button (12)
9 INPUT DIGITAL button (11)
p DIMMER button (12)
q MASTER VOLUME control (10)
w PHONES jack (11)
e AUX input jacks (7)
r SPEAKERS ON/OFF button (11)
t SUBWOOFER OUT ON/OFF button (11)
y FM/AM TUNING
5/ buttons (14)
u FM/AM PRESET
5/ buttons (14)
i FM MODE button (15)
o MEMORY button (14)
; SETTING button (17)
a QUICK SPEAKER SETUP button (16)
s MULTI JOG (PUSH SET) dial (16, 17, 21)
d EXIT button (17, 21)
f ADJUST button (21)
See pages in parentheses for details.
1 ANALOG indicator (12)
2 DUAL MONO indicator (24)
3 H.PHONE indicator (11, 24, 26)
4 3D-PHONIC indicator (24, 26, 27)
5 VIRTUAL SB indicator (20)
6
PRO LOGIC II indicator (23, 25, 26)
7 DSP indicator (24, 26, 27)
8 DIGITAL EQ indicator (22)
9 TUNED indicator (14)
0 STEREO indicator (14)
- INPUT ATT indicator (12)
= AUTO MUTING indicator (15)
~ SLEEP indicator (13)
! VOLUME indicator (9, 10)
@ Digital signal format indicators (11)
# Speaker indicators and signal indicators (10)
$ CH­ indicator (14)
% Main display
01-08_RX-5062S[US].p65
06.2.21, 11:05
2


background image
3
English
Remote Control
AUDIO
TV
VCR
DVD
TEST
EFFECT
MENU
ENTER
LEVEL
RETURN
SURROUND/
DSP
CD-DISC
SLEEP
REC PAUSE
FM MODE SURROUND
DSP
DIMMER
TV/VIDEO
MUTING
OFF
VCR CH
TV CH
VOLUME
SURR R
SURR L
SUBWFR
CENTER
FRONT R
FRONT L
100
1
4
7/P
10
2
5
8
0
3
6
9
10
TV VOLUME
STANDBY/ON
A/V CONTROL
RECEIVER
TAPE/CDR
CD
DVD
AUX
FM/AM
TV SOUND
VCR
ANALOG/
DIGITAL
REW
FF
1
4
-
#
$
@
!
%
3
7
6
9
0
&
^
5
8
=
2
~
See pages in parentheses for details.
1 Number buttons for selecting preset channels (15, 28)
Number buttons for sound adjustment (22, 28)
Number buttons for operating audio/video components (28, 29)
2 SOUND button (22, 28)
3 REC PAUSE button (29)
4 Source selection buttons (9, 10)
TAPE/CDR, CD, DVD, AUX, FM/AM, TV SOUND, VCR
5 FM MODE button (15, 28)
6 SURROUND button (25, 28)
7 DIMMER button (12, 28)
8 TV/VIDEO button (29)
9 VCR CH +/­ buttons (29)
0 TV CH +/­ buttons (29)
- STANDBY/ON
buttons (9, 28, 29)
AUDIO, TV, VCR, DVD
= SLEEP button (13, 28)
~ Operating buttons for audio/video components
3, 8, 7, ¢/4, FF/REW (28, 29)
! CD-DISC button (29)
@ ANALOG/DIGITAL button (11, 12, 28)
# SURROUND/DSP OFF button (25, 27, 28)
$ DSP button (26 ­ 28)
% MUTING button (13, 28)
^ VOLUME +/­ button (10, 28)
& TV VOLUME +/­ buttons (29)
Note:
When you press the one of the audio source selection buttons--
TAPE/CDR, CD, and FM/AM--on the remote control, the receiver
automatically turns on.
Rear Panel
CD
IN
OUT
(REC)
IN
(PLAY)
OUT
(REC)
VCR
TV SOUND
IN
CENTER
SPEAKER
SURROUND
SPEAKERS
RIGHT LEFT
FRONT
SPEAKERS
RIGHT LEFT
AUDIO
RIGHT
LEFT
IN
(PLAY)
TAPE
/CDR
DIGITAL 1(DVD)
DIGITAL 2(CD)
DIGITAL IN
SUBWOOFER
OUT
AUDIO
MONITOR
OUT
DVD
IN
OUT
(REC)
VCR
IN
(PLAY)
DVD
IN
RIGHT
LEFT
AM
LOOP
AM EXT
ANTENNA
816
­
VOLTAGE SELECTOR
220V
230V- 240V
127V
110V
CAUTION:SPEAKER IMPEDANCE
1
5
9
6 78
2
4
3
See pages in parentheses for details.
1 DIGITAL IN terminals (8)
· Coaxial:
DIGITAL 1 (DVD)
· Optical:
DIGITAL 2 (CD)
2 AUDIO input/output jacks (6, 7)
· Input:
CD IN, TAPE/CDR IN (PLAY), VCR IN (PLAY),
TV SOUND IN, DVD IN
· Output: TAPE/CDR OUT (REC), VCR OUT (REC),
SUBWOOFER OUT
3 VIDEO input/output jacks (7)
· Input:
DVD IN, VCR IN (PLAY)
· Output:
MONITOR OUT, VCR OUT (REC)
4 ANTENNA terminals (4, 5)
5 VOLTAGE SELECTOR switch (4)
6 CENTER SPEAKER terminals (5)
7 SURROUND SPEAKERS terminals (5)
8 FRONT SPEAKERS terminals (5)
9 AC power cord (8)
01-08_RX-5062S[US].p65
06.2.21, 11:05
3