background image
SERVICE MANUAL
CASSETTE RECEIVER
No.49575
Nov. 2000
COPYRIGHT
2000 VICTOR COMPANY OF JAPAN, LTD.
KS-FX200
KS-FX200
Area Suffix
J ----- Northern America
Contents
Safety precaution
Disassembly method
Adjustment Method
Description of major ICs
1-2
1-3
1-12
1-16
This service manual is printed on 100% recycled paper.
KS-FX200
KS-FX200


background image
KS-FX200
1-2
!
Burrs formed during molding may be left over on some parts of the chassis. Therefore,
pay attention to such burrs in the case of preforming repair of this system.
Safety precaution


background image
KS-FX200
1-3
Fig. 3
Disassembly Method
Detaching the Front Panel Unit
( See Fig.1 )
Push the Release button in the direction of arrow to
detach the front panel unit.
Removing the Front Chassis
( See Fig. 2 and 3 )
Disengage the four tabs ( a ) in the right and left sides of
unit and pull the front chassis forward to remove it.
Removing the Bottom Cover
( See Fig. 2 to 4 )
1. Removing the front chassis.
2.
Turn the unit up side down.
3.
Insert the four engagements ( b, c, d, e ) to the
screwdriver .
4.
Turn the screwdriver and remove the bottom
cover.
Fig. 2
Fig. 4
Front panel unit
Fig. 1
Push the release button
Front chassis
Bottom cover
Top chassis
Bottom cover
a
a
b
c
a
Front chassis
d
Bottom cover
Rear panel
e


background image
KS-FX200
1-4
Removing the Heat Sink ( See Fig. 5 )
1. Removing the front chassis.
2. Removing the bottom cover.
3. Remove the three screws ( 1 and 1' ) retaining the
heat sink.
Removing the Main Board Assembly
( See Fig. 5 to 7)
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
Attach the heat sink with a screw ( 1' ) on operat-
ing checks.
4. Remove the two screws ( 2 ) retaining the main
board assembly.
5. Remove the six screws ( 3 ) and one screw ( 3' ) retaining
6. Separate the main board assembly and cassette
mechanism assembly.
7. Take out the main board assembly.
Fig. 5
Fig. 6
Fig. 7
(
)
the rear panel.
Heat sink
1
1
1'
2
2
Main board assembly
Rear panel
3
3
3'
3


background image
KS-FX200
1-5
Fig. 9
Fig. 11
Fig. 10
Removing the Cassette Mechanism assembly
( See Fig. 8 )
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
4. Removing the main board assembly.
5. Remove the four screws ( 4 ) retaining the cassette
mechanism.
6. Separate the top chassis and cassette mechanism.
Fig. 8
Removing the Operation Switch board
( See Fig. 9 to 11)
1. Detaching the front panel unit.
2. Turn the front panel back side down.
3. Remove the four screws ( 5 ) retaining the front
cover.
4. Open the front cover gradually by disengaging the
three engagements ( g ) while pushing the top of
the front cover in the arrow "A" direction, then
disengage the three engagements ( h ) on the both
sides.
5. Place the front panel unit front side down.
6. Disengage the three engagements ( i ) on the
bottom to separate the front cover from the front
panel.
(Be careful not to lose the button springs.)
Front side
Cassette mechanism
Top chassis
4
4
44
g
g
g
Front cover
A
5
5
5
5
h
h
h
Front cover
Front panel
i
i
i
Operation switch board