INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
GET0076-001A
[J]
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
ENGLISH
ESP
AÑOL
FRANÇAIS
KS-F160
CASSETTE RECEIVER
RECEPTOR-REPRODUCTOR DE CASSETTE
RADIOCASSETTE
MO
KS-F160
EN00.COVER.KS-F160[J]f
10/8/01, 10:33 AM
3
2
ENGLISH
KS-F160 [EN] GET0076-001A [J]
How to reset your unit
Press and hold both the SEL (Select) and
(Standby/On/Attenuator) buttons at the same
time for several seconds.
This will reset the built-in microcomputer.
Note:
· Your preset adjustments -- such as preset channels or sound adjustments -- will also be erased.
SEL (Select)
(Standby/On/Attenuator)
EN02-03-KS-F160[J]f
10/8/01, 10:33 AM
2
3
ENGLISH
KS-F160 [EN] GET0076-001A [J]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ..............................
2
LOCATION OF THE BUTTONS ...........
4
Control panel ............................................
4
BASIC OPERATIONS ......................
5
Turning on the power ...............................
5
RADIO BASIC OPERATIONS .............
6
Listening to the radio ................................
6
Storing stations in memory ......................
7
Storing your favorite stations into the
one-touch operation button (EX-extra) ..
8
Tuning into a preset station ......................
9
Scanning broadcast stations ....................
9
Changing the AM/FM channel intervals ...
9
TAPE OPERATIONS .......................
10
Listening to a cassette .............................
10
SOUND ADJUSTMENTS .................. 11
Turning on/off the loudness function ........
11
Selecting preset sound modes .................
11
Adjusting the sound .................................
11
Storing your own sound adjustments .......
12
OTHER MAIN FUNCTIONS ............... 13
Setting the clock .......................................
13
Detaching the control panel .....................
14
MAINTENANCE ............................ 15
TROUBLESHOOTING ..................... 16
SPECIFICATIONS .......................... 17
BEFORE USE
* For safety....
· Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
· Stop the car before performing any complicated
operations.
* Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
EN02-03-KS-F160[J]f
10/8/01, 10:33 AM
3
ENGLISH
4
KS-F160 [EN] GET0076-001A [J]
KS-F160
KS-F160
MO
w
q
p
t y u
r
e
2
78
3
5 6
1
9
4
MOST
TP
PTY TP
BEAT POP SOFT LOUD
i
s
;
A
23
o
a
LOCATION OF THE BUTTONS
Control panel
Display window
1
(Standby/On/Attenuator) button
2 LOUD (Loudness) button
3
0 (Eject) button
4 Cassette compartment
5
1 / ¡ (PROG program) buttons
6 EX button
7 AM button
8 FM button
9 + / button
p SEL (Select) button
q
/
buttons
· Also functions as SSM buttons when
pressed together.
w MO (Monaural) button
e Number buttons
r DISP (Display) button
t SCAN button
y SOUND button
u
(Control panel release) button
Display window
i Band indicators
FM1, FM2, FM3,
AM
o MO(Monaural) indicator, ST(Stereo) indicator
; Main display
a Sound mode indicators
BEAT, SOFT, POP
s LOUD indicator
EN04-KS-F160[J]f
10/8/01, 10:34 AM
4
5
ENGLISH
KS-F160 [EN] GET0076-001A [J]
BASIC OPERATIONS
4 Adjust the sound as you want
(See pages 11-12).
To drop the volume in a moment
Press
briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
for more than 1 second.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 13.
To increase the volume.
To decrease the volume.
Turning on the power
1 Turn on the power.
Notes on One-Touch Operation:
· When you select a source in step 2 below, the
power automatically comes on. You do not
have to press this button to turn on the power.
· If the cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off
the power or ignition key. It may damage the
tape head and the cassette.
2 Select the source.
To operate the tuner (FM or
AM), see pages 6 9.
To operate the tape,
see page 10.
EX (extra) button: To use this
button, you need to preset
your favorite station in
advance. For details,
see page 8.
3 Adjust the volume.
Volume level appears
/I/ATT
F M
E X
A M
MO
3
1
2
EN05-KS-F160[J]f
10/8/01, 10:34 AM
5