JVC KD-G814AU - Owner's Manual Immediate Download

CD RECEIVER

For canceling the display demonstration, see page 8.

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0306-001A

[UI]

KD-G814

Cover_KD-G814[UI]f.indd 2

1/26/05 3:58:04 PM

How to reset your unit

This will reset the microcomputer. Your

preset adjustments will also be erased.

How to forcibly eject a disc

If a disc cannot be recognized by the

receiver or cannot be ejected, eject the disc

as follows.

If this does not work, reset your receiver.

Warning:

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

EN02-05_KD-G814[UI]f.indd 2

1/26/05 3:58:18 PM

How to reset your unit ...........................

How to forcibly eject a disc ...................

How to read this manual ........................

How to use the MODE button ...............

Control panel -- KD-G814 ......... 5

Parts identification .................................

Remote controller -- RM-RK50 ... 6

Main elements and features ...................

Getting started....................... 7

Basic operations..................................

Canceling the display demonstrations ...

Setting the clock ....................................

Radio operations ................... 9

Listening to the radio...........................

Storing stations in memory.................... 10

Listening to a preset station ................... 10

Disc operations ...................... 11

Playing a disc in the receiver ............... 11

Playing discs in the CD changer ........... 12

Other main functions ............................. 14

Changing the display information ......... 15

Selecting the playback modes................ 16

Sound adjustments ................ 17

Selecting preset sound modes

(iEQ: intelligent equalizer) ................ 17

Adjusting the sound ............................... 18

Storing your own sound adjustments..... 19

General settings -- PSM ......... 20

Basic procedure ..................................... 20

Other main functions ............. 22

Assigning titles to the sources ............... 22

Changing the control panel angle .......... 23

Detaching the control panel ................... 23

External component operations... 24

Playing an external component ............ 24

Maintenance .......................... 25

More about this receiver ........ 26

Troubleshooting ..................... 28

Specifications ......................... 31

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Contents

*For safety....

· Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

· Stop the car before performing any

complicated operations.

EN02-05_KD-G814[UI]f.indd 3

1/26/05 3:58:21 PM

How to read this manual

The following methods are used to made the

explanations simple and easy-to-understand:

· Some related tips and notes are explained in

"More about this receiver" (see pages 26 and

27).

· Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

How to use the MODE button

If you press MODE, the receiver goes into

functions mode, then the number buttons and

5/ buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

· Pressing MODE again also clears the

functions mode.

EN02-05_KD-G814[UI]f.indd 4

1/26/05 3:58:21 PM

Control panel -- KD-G814

(standby/on attenuator) button

2 DISP (display) button

3 SEL (select) button

4 Control dial

5 Display window

(angle) button

0 (eject) button

5 (up) button / +10 button

(down) button / 10 button

9 MODE button

p Remote sensor

· DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

q SOURCE button

w BAND button

e Reset button

r EQ (equalizer) button

t MO (monaural) button

y SSM (Strong-station Sequential Memory)

button

u INT (intro) button

i RPT (repeat) button

o RND (random) button

; Number buttons

¢ buttons

(control panel release) button

Display window

d Disc information indicators--TAG (ID3

Tag),

(track/file),

(folder)

f MP3 indicator

g CH (CD changer) indicator

· Lights up only when CD-CH is selected

for the playback source.

h CD indicator

j WMA indicator

k Main display

l Equalizer pattern indicator

Audio level indicator

/ EQ (equalizer) indicator

z Band indicators--FM1, FM2, FM3, AM

x Tuner reception indicators--ST (stereo),

MO (monaural)

c Playback mode / item indicators--

(folder),

(disc), RND (random),

INT (intro), RPT (repeat)

v TRACK indicator

b Source / clock display

n LOUD (loudness) indicator

m Audio / volume level indicator

Parts identification

Display window

EN02-05_KD-G814[UI]f.indd 5

1/27/05 11:36:46 AM