background image
CD RECEIVER
For canceling the display demonstration, see page 8.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0305-001A
[UI]
KD-G614/KD-G514
Cover_KD-G614_G514[UI]f.indd 2
Cover_KD-G614_G514[UI]f.indd 2
12/22/04 11:25:55 PM
12/22/04 11:25:55 PM


background image
2
How to forcibly eject a disc
If a disc cannot be recognized by the
receiver or cannot be ejected, ejects the disc
as follows.
"PLEASE" and "EJECT" appear alternately
on the display.
· If this does not work, reset your receiver.
· Be careful not to drop the disc when it
ejects.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.
How to reset your unit
This will reset the microcomputer. Your
preset adjustments will also be erased.
EN02-05_G614_G514[UI]f.indd 2
EN02-05_G614_G514[UI]f.indd 2
12/22/04 11:48:32 PM
12/22/04 11:48:32 PM


background image
3
How to reset your unit ...........................
2
How to forcibly eject a disc ...................
2
How to read this manual ........................
4
How to use the M MODE button...........
4
Control panel
-- KD-G614/KD-G514 ................... 5
Parts identification .................................
5
Remote controller -- RM-RK50 ... 6
Main elements and features ...................
6
Getting started....................... 7
Basic operations..................................
7
Canceling the display demonstrations ...
8
Setting the clock ....................................
8
Radio operations ................... 9
Listening to the radio...........................
9
Storing stations in memory.................... 10
Listening to a preset station ................... 11
Disc operations ...................... 12
Playing a disc in the receiver ............... 12
Playing discs in the CD changer ........... 13
Other main functions ............................. 15
Changing the display information ......... 16
Selecting the playback modes................ 17
Sound adjustments ................ 18
Selecting preset sound modes
(C-EQ: custom equalizer) .................. 18
Adjusting the sound ............................... 19
General settings -- PSM ......... 20
Basic procedure ..................................... 20
Other main functions ............. 22
Assigning titles to the sources ............... 22
Detaching the control panel ................... 23
External component operations... 24
Playing an external component ............ 24
Maintenance .......................... 25
More about this receiver ........ 26
Troubleshooting ..................... 28
Specifications ......................... 31
*Temperature inside the car....
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
Contents
*For safety....
· Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
· Stop the car before performing any
complicated operations.
EN02-05_G614_G514[UI]f.indd 3
EN02-05_G614_G514[UI]f.indd 3
12/22/04 11:26:07 PM
12/22/04 11:26:07 PM


background image
4
How to read this manual
The following methods are used to made the
explanations simple and easy-to-understand:
· Some related tips and notes are explained in
"More about this receiver" (see pages 26 and
27).
· Button operations are mainly explained with
the illustrations as follows:
Press briefly.
Press repeatedly.
Press either one.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
How to use the M MODE button
If you press M MODE, the receiver goes into
functions mode, then the number buttons and
5/ buttons work as different function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
Time countdown indicator
To use these buttons for original functions
again after pressing M MODE, wait for
5 seconds without pressing any of these buttons
until the functions mode is cleared.
· Pressing M MODE again also clears the
functions mode.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
EN02-05_G614_G514[UI]f.indd 4
EN02-05_G614_G514[UI]f.indd 4
12/22/04 11:26:07 PM
12/22/04 11:26:07 PM


background image
5
Control panel -- KD-G614/KD-G514
1
5 (up) / (down) buttons
2 E EQ (equalizer) button
3 D DISP (display) button
4 S SEL (select) button
5 · Control dial
·
(standby/on attenuator) button
6 Display window
7 Remote sensor
· DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
8
0 (eject) button
9
4/¢
buttons
p
(control panel release) button
q SOURCE button
w BAND button
e Number buttons
r MO (monaural) button
t SSM (Strong-station Sequential Memory)
button
y RPT (repeat) button
u RND (random) button
i M MODE button
o AUX (auxiliary) input jack
· Only for KD-G614.
· NOT compatible with digital signals.
Display window
; Disc information indicators--TAG (ID3
Tag),
(folder),
(track/file)
a Main display
s Source display
Volume level indicator
d EQ (equalizer) indicator
f Sound mode (C-EQ: custom equalizer)
indicators--ROCK, CLASSIC, POPS,
HIP HOP, JAZZ, USER
·
also works as the time countdown
indicator and level meter during play (see
page 20).
g Disc type indicators--WMA, MP3
h Tuner reception indicators--ST (stereo),
MO (monaural)
j Playback source indicators--
CH: Lights up only when CD-CH is selected
as the playback source.
DISC: Lights up for the built-in CD player.
k Playback mode / item indicators--
RND (random),
(disc),
(folder),
RPT (repeat)
l LOUD (loudness) indicator
/ Tr (track) indicator
Parts identification
6
7 8
o
i
u
y
t
r
e
w
q
p
9
Display window
EN02-05_G614_G514[UI]f.indd 5
EN02-05_G614_G514[UI]f.indd 5
12/22/04 11:26:07 PM
12/22/04 11:26:07 PM