background image
HR-S7600EU
HR-S7611EU
625
1
2
3
4
5
6
7
8
9
1
2
3
4
1
2
3
4
VCR
TV
CABLE
/SAT
TV/VCR
­ ­:­ ­
AUDIO
0000
START
DEBUT
STOP
FIN
DATE
TV
PROG
DAILY/QTDN.
VPS/PDC
AUX
WEEKLY/HEBDO
EXPRESS
LCD PROG
ENTER/ENTREE
0
PROG
MENU
OK
30 SEC
TV PROG +
TV PROG ­
T
V
­
TV
+
REW
FF
SHUTTLE
C. RESET
STANDBY/ON
VIDEO
S-VIDEO
(MONO)L ­AUDIO­ R
REC LINK
TV PROG
TV PROG
REVIEW
SP
VPS/PDC
VCR
+8
4
0
6
15dB
NORM
DIGITAL
TBC/NR
SP/LP
A.DUB
JOG
EN
CONTENTS
SAFETY FIRST
2
Safety Precautions ................................... 2
INSTALLING YOUR NEW RECORDER
4
Basic Connections ................................... 4
S-VIDEO Connection .............................. 5
INITIAL SETTINGS
6
Auto Set Up ............................................ 6
Preset Download ..................................... 8
Language .............................................. 10
On-Screen Displays ............................... 11
Power Save Mode ................................. 12
T-V LINK
13
T-V Link Functions ................................ 13
INFORMATION ON COLOUR SYSTEM
14
Colour System Set ................................. 14
PLAYBACK
15
Basic Playback ...................................... 15
Playback Features ................................. 16
RECORDING
20
Basic Recording .................................... 20
Recording Features ................................ 21
B.E.S.T. Picture System .......................... 24
TIMER RECORDING
26
SHOWVIEW Timer Programming .............. 26
Express Timer Programming .................. 28
Automatic Satellite
Programme Recording ........................... 33
SPECIAL FEATURES
34
Remote Control Functions ..................... 34
EDITING
37
Preparation For Editing .......................... 37
Edit To Or From Another Video
Recorder ............................................... 38
Edit From A Camcorder ......................... 41
Audio Dubbing ..................................... 42
SYSTEM CONNECTIONS
43
Connection To A Satellite Tuner ............. 43
Connecting/Using A Decoder ................ 46
Connecting/Using A Stereo System ........ 47
SUBSIDIARY SETTINGS
48
Tuner Set ............................................... 48
Video Channel Set ................................. 55
Clock Set ............................................... 56
SHOWVIEW Setup .................................... 58
TROUBLESHOOTING
59
QUESTIONS AND ANSWERS
61
INDEX
62
SPECIFICATIONS
66
ENGLISH
VIDEO CASSETE RECORDER
INSTRUCTIONS
LPT0249-001A
FIRST
SEE
AUTO SET-UP
ON BACK


background image
2 EN
SAFETY FIRST
IMPORTANT
Please read the various precautions on page 2 and 3 before installing or operating the recorder.
It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent
of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary,
dramatic, musical, or artistic work embodied therein.
Safety Precautions
Cassettes marked "S-VHS" and "VHS" can be used with this video cassette recorder. However, S-VHS recordings are possible only
with cassettes marked "S-VHS".
SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence
from Gemstar Development Corporation.
CAUTION
When you are not using the recorder for a long period of time, it is recommended that you disconnect the
power cord from the mains outlet.
Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or
fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead
or aerial.
WARNING
There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West),
and SECAM-B, used in Eastern European countries (also called SECAM-East).
1. This recorder can also receive SECAM-B colour television signals for recording and playback.
2. Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video
recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video
recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).
3. SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome
pictures when played back with this recorder.
4. This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
625


background image
EN
3
Failure to heed the following precautions may result in damage to the recorder, remote control or video
cassette.
1. DO NOT place the recorder . . .
... in an environment prone to extreme temperatures or humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the recorder's ventilation openings.
3. DO NOT place heavy objects on the recorder or remote control.
4. DO NOT place anything which might spill on top of the recorder or remote control.
5. AVOID violent shocks to the recorder during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under
extremely humid conditions--just as water droplets form in the surface of a glass filled with cold liquid. Moisture
condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the
recorder turned on for a few hours to let the moisture dry.
ABOUT HEAD CLEANING
Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or
interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.
The STANDBY/ON
button does not completely shut off mains power from the unit, but switches operating
current on and off. "
" shows electrical power standby and " " shows ON.
Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-
speed video recorder.
For Italy:
"It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.'95 published in the
Official Gazette of the Italian Republic n. 301 of 28 Dec.'95"


background image
4 EN
Basic
Connections
CHECK CONTENTS
1 Makesurethepackagecontainsalloftheaccessories
listed in "Specifications" (
pg. 66).
SITUATE RECORDER
2 Placetherecorderonastable,horizontalsurface.
CONNECT RECORDER TO
TV
3 Theconnectionmethodyouusedependsonthetypeof
TV you have.
RF CONNECTION
To Connect To A TV With NO AV Input Terminals . . .
a­ Disconnect the TV aerial cable from the TV.
b­ Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
c­ Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and the
TV's aerial terminal.
AV CONNECTION
To Connect To A TV With AV Input Terminals . . .
a­ Connect the aerial, recorder and TV as per "RF
CONNECTION".
b­ Connect an optional SCART cable between the
AV1 IN/OUT socket on the rear panel of the
recorder and the TV's 21-pin SCART connector.
c­ Set the AV1 OUT switch to the appropriate position.
See "AV1 INPUT/OUTPUT SIGNAL SELECTION
FOR AV CONNECTION" below.
CONNECT RECORDER TO
MAINS
4 Plugtheendofthemainspowercordintoamains
outlet.
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COMPLETED
BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
INSTALLING YOUR NEW RECORDER
AV1 IN/OUT
AV2 IN/DECODER
AV1 OUT
COMP. Y/C
ANT. IN
S OUT
PAUSE
RF OUT
R
L
AUDIO
OUT
21-pin SCART Cable
21-pin SCART
connector
Back of TV
Mains Power
Cord
Aerial terminal
Rear view
Mains outlet
AV1 IN/OUT
RF Cable
(provided)
TV Aerial
Cable
After you plug the mains power cord into a mains outlet, the
Country Set display appears on the TV screen and/or on the
recorder's front display panel when the
button on the
recorder/remote control is pressed for the first time to power
on the recorder; go to page 6 to perform Auto Set Up.
Make AV connection if your TV has a 21-pin AV input
connector (SCART) in order to reduce the possibility of
interference. And if you are using a stereo TV, you will need
this cable in order to enjoy stereo playback of videotapes.
AV1 INPUT/OUTPUT SIGNAL SELECTION FOR AV CONNECTION
The AV1 IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in
which the luminance and chrominance signals are separated). For input signal selection, select "VIDEO" (regular video signal) or
"S-VIDEO" (Y/C signal) for "AV1 SELECT" setting (
pg. 40). For output signal selection, use AV1 OUT switch of the rear panel.
If your TV's 21-pin AV input connector (SCART) is compatible only with the regular video signal, set this switch to COMP.
If your TV's 21-pin AV input connector (SCART) is compatible with the Y/C signal, set this switch to Y/C. You can obtain high-
quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
NOTES:
Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.
For switching the TV's mode, refer to the instruction manual of your television.
To obtain high-quality S-VHS pictures, you can also use the S-VIDEO CONNECTION described on page 5.
AV1 OUT
switch


background image
EN
5
AV1 IN/OUT
AV2 IN/DECODER
AV1 OUT
COMP. Y/C
ANT. IN
RF OUT
S OUT
PAUSE
R
L
AUDIO
OUT
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the recorder's
front display panel when the
button on the recorder/remote control is pressed for the first time to power on the recorder; go to
page 6 to perform Auto Set Up.
CONNECT RECORDER TO
TV
1 a­Connecttheaerial,recorderandTVasper"RF
CONNECTION" (
pg. 4).
b­ Connect the recorder's S-VIDEO OUT connector to
the TV's S-VIDEO IN connector.
c­ Connect the recorder's AUDIO OUT connectors to
the TV's AUDIO IN connectors.
CONNECT RECORDER TO
MAINS
2 Plugtheendofthemainspowercordintoamains
outlet.
To Connect to A TV With S-VIDEO/AUDIO IN Connectors . . .
S-VIDEO Connection
Mains outlet
Mains Power Cord
AUDIO OUT
ANT. IN
Back of Recorder
RF OUT
Aerial or Cable
RF Cable (provided)
Back of TV
S-Video cable (not provided)
Audio cable (not provided)
S-VIDEO OUT
NOTES:
You can obtain high-quality S-VHS pictures.
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
pg. 47)
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
For switching the TV's mode, refer to the instruction manual
of your television.
AUDIO IN
connectors
S-VIDEO IN
connector
Aerial terminal