background image
GY-DV5000
LWT0072-001A
DV CAMCORDER
INSTRUCTIONS
* The illustration shows the GY-DV5000 DV Camcorder with the optional lens, viewfinder, Microphone holder
and Microphone attached.
This instruction manual is made from 100% recycled paper.
For Customer Use :
Enter below the Serial No. which is located on the body.
Retain this information for future reference.
Model No. GY-DV5000
Serial No.
Thank you for purchasing this JVC product. Before operating
this unit, please read the instructions carefully to ensure the
best possible performance.
INTRODUCTION
CONTROLS,
INDICATORS AND
CONNECTORS
BASIC SYSTEM
CONNECTIONS AND
ADJUSTMENTS
POWER SUPPLY
PREPARATIONS
SETTING AND
ADJUSTMENTS
BEFORE SHOOTING
SHOOTING
OPERATION
PLAYBACK MODE
USING EXTERNAL
COMPONENTS
TIME CODE
OPERATION
MENU SCREENS
OTHERS
FEATURES OF THE
CAMERA SECTION
GY-DV5000
LWT0090
DV CAMCORDER
INSTRUCTIONS
* The illustration shows the GY-DV5000 DV Camcorder with the optional lens and viewfinder Microphone holder, Microphone attached.
This instruction manual is made from 100% recycled paper.
Thank you for purchasing this JVC product. Before operating
this unit, please read the instructions carefully to ensure the
best possible performance.
INTRODUCTION
CONTROLS,
INDICATORS AND
CONNECTORS
BASIC SYSTEM
CONNECTIONS AND
ADJUSTMENTS
POWER SUPPLY
PREPARATIONS
SETTING AND
ADJUSTMENTS
BEFORE SHOOTING
SHOOTING
OPERATION
PLAYBACK MODE
USING EXTERNAL
COMPONENTS
TIME CODE
OPERATION
MENU SCREENS
OTHERS
FEATURES OF THE
CAMERA SECTION
E
U
CAUTION
This section of instruction manual is specially edited
for service purpose with modified contents.
It is not recommended to use this section for the sub-
stitution of the original book included in the merchan-
dise.
CAUTION
This section of instruction manual is specially edited
for service purpose with modified contents.
It is not recommended to use this section for the sub-
stitution of the original book included in the merchan-
dise.


background image
2
1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
6. Do not use this appliance near water ­ for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, etc.
7. Do not place this appliance on an unstable cart, stand, or table.The appliance may fall, causing
serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the appliance.
Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting
kit approved by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to
insure reliable operation of the appliance and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug,
or other similar surface. This appliance should never be placed near or over a radiator or heat register. This appliance
should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
9. This appliance should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed
to operate from battery power, refer to the operating instructions.
10. This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin). This plug
will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding
plug.
11. For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power-line surges.
12. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by
persons walking on it.
13. Follow all warnings and instructions marked on the appliance.
14. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.
16. Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
17. Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f.
When the appliance exhibits a distinct change in performance ­ this indicates a need for service.
18. When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
19. Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety
checks to determine that the appliance is in safe operating condition.
IMPORTANT SAFEGUARDS
E
U
E-2
Thank you for purchasing the JVC GY-DV5000 DV Camcorder.
These instructions are for the GY-DV5000E.
The instructions are given in five languages: English from page E-2 to E-93, German from page G-2 to G-93, French from page F-2 to F-93,
Spanish from page S-2 to S-93, Italian from page I-2 to I-93.
This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This
equipment is designed for professional video appliances and can be used in the following environments:
residential area (in houses) or rural area
commercial and light industry; e.g. offices or theatres
urban outdoors
In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not
exceeding the following length:
Caution : Where there are strong electromagnetic waves or magnetism, for example near a radio or TV transmitter,
transformer, motor, etc., the picture and the sound may be disturbed. In such case, please keep the apparatus
away from the sources of the disturbance.
SAFETY PRECAUTIONS
DC IN
Exclusive Cable
5 meters
FRONT AUDIO IN Shielded Twist Pair Cable
10 meters
REAR AUDIO IN Shielded Twist Pair Cable
10 meters
LINE OUT
Exclusive Cable
10 meters
EARPHONE
Cable with earphone
2 meters
Port
Cable
Length
Port
Cable
Length
DC OUT
Exclusive Cable
1 meter
MONITOR OUT
Coaxial Cable
10 meters
Y/C OUT
Exclusive Cable
10 meters
DV
Exclusive Cable
4.5 meters


background image
3
SAFETY PRECAUTIONS
FOR USA AND CANADA
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.
INFORMATION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmfull interfrence to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC
COULD VOID USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
INFORMATION FOR USA
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la Class B est conforme à la norme
NMB-003 du Canada.
CAUTION
NOTE:
The rating plate (serial number plate) is on the top frame.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS APPLIANCE TO
RAIN OR MOISTURE.
This unit should be used with 12V DC only.
CAUTION:
To prevent electric shocks and fire hazards, do NOT use
any other power source.
CAUTION
To prevent electric shock, do not open the cabinet. No user servicea-
ble parts inside. Refer servicing to qualified service personnel.
AVERTISSEMENT :
POUR EVITER LES RISQUES D'INCENDIE OU
D'ELECTROCUTION, NE PAS EXPOSER
L'APPAREIL A L'HUMIDITE OU A LA PLUIE.
Ce magnétoscope ne doit être utilisé que sur du courant
direct en 12V.
ATTENTION :
Afin d'eviter tout resque d'incendie ou d'électrocution,
ne pas utillser d'autres sources d'alimentation électrique.
REMARQUE :
La plaque d'identification (numéro de série) se trouve sur le panneau
arrière de l'appareil.
E
U
E-3
SAFETY PRECAUTIONS
NOTE:
The rating plate (serial number plate) is on the top frame.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
This unit should be used with 12V DC only.
CAUTION:
To prevent electric shocks and fire hazards, do NOT
use any other power source.
CAUTION
To prevent electric shock, do not open the cabinet. No user service-
able parts inside. Refer servicing to qualified service personnel.


background image
4
Thank you for purchasing the DV Camcorder GY-DV5000.
These instructions are for GY-DV5000.
This unit is a DV video system format camcorder.
Videocassettes marked with the
symbol or
symbol
can be used.
MAIN FEATURES
The following phenomena may occur when tapes recorded
on other units (including another GY-DV5000) are recorded
or played back on this camcorder.
The transient section between scenes recorded on other
units and those recorded on this unit may appear
disturbed.
Digital noise may appear during playback due to tracking
errors.
Built-in compatible mechanism for use of both standard-size
DV videocassettes and mini-size DV videocassettes
Recording/playback can be made to/from Standard DV, Mini
DV and DVCAM cassettes in DV format.
Tapes recorded in the DVCAM format can only be played
back (simple playback). Recording in the DVCAM format is
not possible.
DVCAM is a registered trademark of SONY Corporation.
Compact, lightweight design
Employment of aluminum die cast has resulted in an
operation-condition weight as low as approximately 5.5 kg
including lens, viewfinder, battery, and cassette.
DV high-quality digital format
The 4:1:1, 8-bit, 25 Mbps component digital processing
ensures recording and playback with high picture quality.
High sound quality based on PCM audio
Two types of sampling, 16-bit, 48 kHz sampling and 12-bit,
32 kHz sampling, ensure high-quality digital audio.
Time code reader/generator
The built-in time code reader/generator can be used to record
SMPTE time code and user's bits.
Built-in 2.5" color LCD display
In addition to displaying the camera image and the playback
image, the LCD monitor shows the status screens, menu
screens for settings, and alarm indications.
Built-in monitor loudspeaker for audio checking
The input audio can be monitored in recording or EE mode.
The playback sound can be monitored in the playback mode.
The loudspeaker also outputs an alarm tone in case an
abnormal condition occurs in the unit.
Recording check function for convenient recording review and
edit search function.
Camera section designed with 3-CCD system for high-quality
picture
1/2" 3-CCD with 380,000 effective pixels employed. Digital
signal processing for reproduction of DV high-quality picture.
Super sensitivity F13, 2000 lux
2000 lux standard sensitivity increased to F13 while high S/
N is retained. Enables shooting at normal indoor illumination
eliminating the need for extra illumination.
LOLUX for 0.2 lux (F1.4) illumination
Employment of LOLUX mode ensures +36 dB gain. This is
ideal for difficult shooting conditions with almost no
illumination.
The gain up value can be selected in the menu.
Multi-Zone Auto Iris Detection Circuit
Multi-zone auto iris detection circuit ensures optimum iris
position even in backlit conditions or when a bright subject
moves in a frame. Switch provided for selecting over or under
level.
Safety Zone indication in viewfinder
Two types of safety zone indicator functions provided.
Zebra pattern video level indication in viewfinder
Full Auto Shooting (FAS) function
Eliminating the need for troublesome switch or filter
operations, the FAS function automatically provides a wide
range of compatibility with shooting conditions which varies
as you move between indoors and outdoors or between bright
and dark locations.
Color temperature conversion filters for 3200K, 5600K, 5600K
+ 1/8ND, 5600 + 1/64ND provided.
Variable scan shutter
Eliminates flicker when shooting other screen pictures than
NTSC, such as computer monitor screens.
Copes with the range from 60.1 Hz to 2084.6 Hz.
DV (i. LINK) connector
DV connector (4-pin) provided. Enables transfer of digital data
to other equipment provided with DV connector, such as a
non-linear editing system.
1/2" bayonet type lens
Camera output, VCR playback output (composite/YC)
possible
Built-in color bar (SMPTE type)
Superior operability with shutter speed and menus selected
by dial.
Connection to network possible (when the optional Network
Pack KA-DV5000 is attached)
Video and audio streaming data can be transmitted through
a LAN card and recorded on memory cards.
This unit records and plays back in the SP mode.
Recording or playback in the LP mode is not possible.
Due to manufacturing dispersion of tapes, we
recommend not to record pictures within the first 2 to 3
minutes from the beginning of the tape.
Before recording important scenes, be sure to perform
a test recording and confirm that both video and audio
are recorded correctly.
Recorded video and audio contents are for private use.
Other use may infringe on the rights of copyright holders.
JVC cannot assume liabilities that may derive from the
impossibility of normal recording or playback of video or
audio due to malfunction of the camcorder or the
videocassette.
5
CONTENTS
INTRODUCTION
MAIN FEATURES ............................................................... 4
1. INTRODUCTION
1-1
Precautions for Proper Use ........................................ 6
1-2
Routine and Periodical Maintenance ......................... 7
1-3
Precautions for Use of Head Cleaning Tape .............. 8
1-4
Videocassette to be Used .......................................... 8
1-5
Battery Pack to be Used ............................................ 8
1-6
Condensation ............................................................. 9
1-7
Characteristic CCD Phenomena ................................ 9
2. CONTROLS, INDICATORS AND CONNECTORS
2-1
Front Section ............................................................ 10
2-2
Right Side Section .................................................... 12
2-3
Left Side Section ...................................................... 16
2-4
Top Section .............................................................. 17
2-5
Rear Section ............................................................ 18
2-6
Indications on the LCD Monitor and in
the Viewfinder .......................................................... 20
2-7
Lens (Optional) ......................................................... 27
2-8
1.5-Inch Viewfinder (Optional) .................................. 28
PREPARATIONS
3. BASIC SYSTEM CONNECTIONS AND
ADJUSTMENTS
3-1
Basic System ........................................................... 29
3-2
Attaching the Zoom Lens ......................................... 30
3-3
Attaching the Viewfinder ........................................... 30
3-4
Attaching the Microphone (Provided) ....................... 31
3-5
Attaching the Microphone (Optional) ........................ 31
3-6
Attaching the Tripod Base (Provided) ....................... 32
4. POWER SUPPLY
4-1
AC Operation ........................................................... 33
4-2
Battery Pack Operation (Optional) ........................... 33
BASIC OPERATIONS
5. PREPARATIONS
5-1
Turning the Power ON .............................................. 37
5-2
Cassette Loading and Unloading ............................. 38
5-3
Viewing the LCD Monitor ......................................... 40
5-4
Setting, Displaying and Recording the Date
and Time .................................................................. 41
5-5
Charging the Built-in Battery .................................... 44
6. SETTING AND ADJUSTMENTS BEFORE
SHOOTING
6-1
Camera Settings ...................................................... 45
6-2
Screen Size (4:3/LETTER) Mode Selection ............. 45
6-3
Viewfinder Adjustment ............................................. 46
6-4
External Monitor Adjustment .................................... 46
6-5
Back Focus Adjustment ............................................ 47
6-6
White Balance Adjustment ....................................... 48
6-7
Audio Input Signal Selection .................................... 49
6-8
Recording Level Adjustment .................................... 50
6-9
Monitoring Audio during Recording .......................... 51
7. SHOOTING OPERATION
7-1
Basic Recording Operation ...................................... 52
7-2
Searching for Recorded Scenes (Edit Search) ........ 54
7-3
If the Record-Standby Mode Continues ................... 55
7-4
Checking Recorded Contents in Record-Standby
Mode (Recording Check Function) .......................... 55
7-5
Recording the Color Bars ......................................... 56
8. PLAYBACK MODE
8-1
Playback Procedure ................................................. 57
8-2
Fast-Forward, Rewind .............................................. 58
8-3
Search ...................................................................... 58
8-4
Blank Search ............................................................ 58
8-5
Outputting CH-3, CH-4 Channel Audio .................... 59
APPLICATION
9. USING EXTERNAL COMPONENTS
9-1
Connecting a Video Component with
DV Connector ........................................................... 60
10. TIME CODE OPERATION
10-1 Displaying Time Code .............................................. 62
10-2 Presetting and Recording of Time Code .................. 62
10-3 Recording Time Codes in Continuation of Time
Codes Recorded on Tape ........................................ 64
10-4 Reproducing Time Codes ......................................... 64
11. MENU SCREENS
11-1 Menu Screen Configuration ..................................... 65
11-2 Setting Menu Screens .............................................. 66
11-3 FILE MANAGE Menu Screen ................................... 67
11-4 TOP MENU Screen .................................................. 68
11-5 CAMERA OPERATION Menu Screen ...................... 69
11-6 CAMERA PROCESS MENU Screen ....................... 70
11-7 ADVANCED PROCESS Screen ............................... 71
11-8 SKIN COLOR ADJUST Screen ............................... 71
11-9 AUDIO/VIDEO Menu Screen ................................... 72
11-10 LCD/VF Menu Screen .............................................. 73
11-11 TC/UB/CLOCK Menu Screen ................................... 75
11-12 TIME/DATE Menu Screen ........................................ 76
11-13 OTHERS Menu Screen ............................................ 77
12. FEATURES OF THE CAMERA SECTION
12-1 Full-Time Auto White Balance (FAW) ....................... 79
12-2 IRIS (Brightness) Adjustment ................................... 80
12-3 Adjusting the Shutter Speed .................................... 81
12-4 Shooting the Screen Image on a Computer
Monitor ..................................................................... 82
12-5 Gain (Sensitivity) Adjustment ................................... 83
12-6 Switch Setup According to Illumination
and Subject .............................................................. 84
12-7 How to Use Skin Detail ............................................ 85
OTHERS
13. OTHERS
13-1 Alarm Indications and Actions .................................. 87
13-2 Troubleshooting ........................................................ 90
13-3 Hour Meter Display .................................................. 91
13-4 Specifications ........................................................... 92


background image
6
1. INTRODUCTION
1-1 Precautions for Proper Use
Supply voltage
Make sure that the power is between 11 V and 15 V DC. If
the power voltage is too low, abnormal color and increased
noise may occur. Do not exceed 15 V DC in any case, or the
unit could be damaged.
Allowable ambient temperature and humidity
Be sure to use the unit within the allowable temperature range
of 0°C to 40°C and a relative humidity of 30% to 80%. Using
the unit at a temperature or humidity outside the allowable
ranges could result not only in malfunction but the impact on
the CCD elements could be serious as small white spots
may be generated. When storing the GY-DV5000 for a long
time, the storage temperatures should be -20°C to 60°C.
Strong electromagnetic waves or magnetism
Noise may appear in the picture or audio and/or the colors
may be incorrect if the camera is used near a radio or
television transmitting antenna, in places where strong
magnetic fields are generated by transformers, motors, etc.,
or near devices emitting radio waves, such as transceivers
or cellular phones.
Use of wireless microphone near the camera
When a wireless microphone or wireless microphone tuner
is used near the camera during recording, the tuner could
pick up noise.
Avoid using or placing the unit in places;
· subject to extreme heat or cold;
· with excessive dirt or dust;
· with high humidity or moisture;
· subject to smoke or vapour such as near a cooking stove;
· subject to strong vibrations or on an unstable surface.
· also do not leave the unit for long hours in a parked car
under direct sunlight or near room heating equipment.
Do not leave the unit where it is subject to radiation or x-
rays or where corrosive gasses occur.
Protect the unit from being splashed with water
(especially when shooting in the rain).
Protect the unit from being wet when shooting on a beach.
In addition, salt and sand may adhere to the camera body.
Be sure to clean the camera after use.
Protect the unit against penetration of dust when using it in a
place subject to sandy dust.
Setup level
The video signal of the unit's video output is provided with a
setup level when shipped from the factory. If you want to turn
OFF the setup level, set the SET UP item on the AUDIO/
VIDEO menu screen to 0.0%.
Optical performance of lens
Due to the optical performance of the lens, color divergence
phenomena (magnification chromatic aberration) may occur
at the periphery of the image. This is not a camera
malfunction.
Noise may appear in the viewfinder when switching between
the playback picture and the EE picture.
Use the unit in an upright position.
If placed on its side, heat release efficiency will deteriorate,
adversely affecting the tape transport. Depending on
circumstances the tape may also be damaged.
Vibrations
Colors may fail to appear and/or the image and sound may
be disturbed during VTR playback in locations subjected to
strong vibrations.
Precautions for transportation
Do not drop or hit the unit against a hard object.
Remove the videocassette before transporting the unit.
Do not insert an object other than a videocassette in the
cassette insertion slot. Be sure to close the cassette cover
when the unit is not to be used for a long period.
Do not set the POWER switch to OFF or remove the power
cable during recording or playback. Otherwise the tape may
be damaged.
The sensitivity level of the provided microphone is set lower
than the reference input (- 60 dBs) setting.
When the unit is not in use, be sure to set the POWER switch
to OFF in order to reduce power consumption.
Cleaning the body: Wipe body with a dry, soft cloth. When it
is extremely dirty, soak the cloth in a solution of neutral
detergent, wipe the body with it, and then use a clean cloth
to remove the detergent. To prevent deformation of the body,
etc. and to avoid operation hazards, do not allow volatile
liquids such as benzine and thinner to touch the body, and
do not wipe it with a cloth soaked in such a liquid.
The camera may not show stable pictures in the period
immediately after the power is turned on, but this is not a
malfunction.
If a tape containing recorded PAL signals is played back,
"PAL INHIBIT" is displayed and correct playback will not take
place. If this happens, remove the videocassette so that the
unit returns to its normal state.
When turning on the power with the tape inserted or after
loading a tape, the built-in head cleaner will emit a sound
while operating. However, this is not a malfunction of the unit.
The LCD screen and the viewfinder screen are manufactured
using high-precision technology. Black spots may appear on
the LCD screen and the viewfinder screen, or red, blue, green
and/or white spots may not turn off. However, this is not a
malfunction and these spots are not recorded on the tape.
Do not insert fingers or foreign objects into the cassette
insertion slot as this may result in personal injury or damage
to the mechanism.
CAUTION :
Do not point the lens or viewfinder directly at the sun or
other strong light source.
·Eye damage could result.
· If the lens or viewfinder is left pointed at the sun, rays
may collect inside the unit and cause damage or a fire.
When carrying the camera, be sure to hold the carrying
handle. Holding the lens or viewfinder may result in
damage.
7
1. INTRODUCTION
Head Cleaning
To maintain beautiful pictures and sound, be sure to use a
head cleaning tape to clean the head periodically. (Read the
"Precautions for Use of Head Cleaning Tape" on page 8.) If
head cleaning is not performed periodically, a type of mosaic
noise called block noise may appear in the picture or sound
may be interrupted.
Please use cleaning tape produced by JVC. Do not use head
cleaning tapes other than specified. Read the precautions
and instructions for use of the head cleaning tape on page 8.
When dust adheres to the heads, the warning message
"HEAD CLEANING REQUIRED!" is displayed on the LCD
monitor and in the viewfinder during playback, edit search,
and recording check using the RET button on the lens section.
The GY-DV5000 incorporates precision mechanical parts, which will collect dirt, wear out and deteriorate as the unit is used. After
the unit has been used for a long period even in a normal environment, the heads, drums and tape transport mechanisms also
collect dirt. Especially, dust which penetrates the inside of the VCR section during outdoor use will promote the wear and deterioration
of mechanical parts by causing poor contact between tape and heads or failing to maintain the video and audio quality at high
levels. To prevent wear and deterioration, clean the mechanical parts using a head cleaning tape as routine maintenance. However,
cleaning with a head cleaning tape alone is not enough for cleaning the entire tape transport mechanism, so it is also recommended
to apply periodical maintenance (inspection) to prevent the sudden occurrence of failure. As the replacement, adjustment and
servicing of parts require advanced skill and equipment, please consult the person in charge of professional video equipment at
your nearest JVC-authorized service agent.
1-2 Routine and Periodical Maintenance
Periodical Maintenance
Contents : Check or replace the following mechanical parts
according to the running time.
· The maintenance contents vary depending on the operating
environment and method. Therefore, the above data should
be considered as a reference.
Time management
The accumulated running time of the unit can be confirmed
with the hour meter display (which shows the accumulated drum
running time). For details, see "HOUR METER DISPLAY" on
page 91.
For consultations related to the maintenance planning or
cost, please contact the person in charge of professional
video equipment at your nearest JVC-authorized service
agent.
­ : Check
: Clean, check and adjust.
: Clean and check. Replace as required.
: Replace.
Running Time
500H 1000 H 1500H 2000H 4000H
Drum ass'y (including heads)
Head cleaner
Tape guides & rollers
Rotary encoder
­­
­
Gears
­
­
Drive parts
­
­
­
Block Noise
HEAD CLEANING REQUIRED!
For servicing
Refer to the service manual page. 2-6 "2.4.3 Cleaning"