background image
GR-FXM15
COMPACT VHS CAMCORDER
LYT0281-001B
INSTRUCTIONS
CONTENTS
GETTING STARTED
6 ­ 13
Power............................................. 6
Clock (Lithium) Battery Insertion/Removal ... 8
Date/Time Settings ............................. 9
Recording Mode Setting ...................... 10
Tape Length Setting ........................... 10
Loading/Unloading A Cassette .............. 11
Grip Adjustment ............................... 12
Viewfinder Adjustment ....................... 12
Shoulder Strap Attachment .................. 13
Tripod Mounting ............................... 13
RECORDING
14 ­ 35
Basic Recording ................................ 14
Basic Features ................................. 18
Advanced Features ............................ 21
PLAYBACK
36 ­ 41
Basic Playback ................................. 36
Features ........................................ 37
Using The Cassette Adapter ................. 39
Basic Connections And Tape Dubbing ....... 40
USING THE REMOTE
CONTROL UNIT
42 ­ 49
Random Assemble Editing .................... 44
Insert Editing ................................... 48
Audio Dubbing ................................. 49
USER MAINTENANCE
50
TROUBLESHOOTING
51 ­ 52
INDEX
53 ­ 56
Indications ...................................... 53
Controls, Connectors And Indicators ........ 54
Terms ........................................... 56
CAUTIONS
57 ­ 58
SPECIFICATIONS
59


background image
2 EN
Dear Customer,
Thank you for purchasing the JVC Compact VHS
camcorder. Before use, please read the safety
information and precautions contained in the
following pages to ensure safe use of your new
camcorder.
SAFETY
PRECAUTIONS
Using This Instruction Manual
· All major sections and subsections are listed in the
Table Of Contents (
cover page).
· Notes appear after most subsections. Be sure to
read these as well.
· Basic and advanced features/operation are
separated for easier reference.
It is recommended that you . . .
.... refer to the Index (
pgs. 53 ­ 56) and
familiarize yourself with button locations, etc.
before use.
.... read thoroughly the Safety Precautions
(
pgs. 57, 58). They contain extremely
important information regarding the safe use of
your new camcorder.
IMPORTANT
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace the
fuse cover.
If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug immediately,
to avoid a possible shock hazard by inadvertent
connection to the mains supply.
If this product is not supplied fitted with a mains plug
then follow the instructions given below:
DO NOT make any connection to the Larger Terminal
coded E or Green.
The wires in the mains lead are coloured in accord-
ance with the following code:
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured
black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt -- consult a competent electrician.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
Warning on lithium battery
(for clock operation and remote control unit)
The battery used in this device may present a
fire or chemical burn hazard if mistreated. Do
not recharge, disassemble, heat above 100°C or
incinerate.
Replace the battery with Panasonic (Matsushita
Electric), Sanyo or Maxell CR2025; use of
another battery may present a risk of fire or
explosion.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in
fire.
CAUTIONS:
To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.
When you are not using the AC Power
Adapter/Battery charger for a long period of
time, it is recommended that you disconnect
the power cord from AC outlet.
NOTES:
The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.
The rating plate (serial number plate) of the
AC Power Adapter/Charger is on its bottom.
Crossed Out Dust Bin Mark
The Crossed Out Dust Bin
Mark on the battery pack
indicates that the product
complies with Directives
91/157/EEC and 93/86/EEC.
Nickel-Cadmium (Ni-Cd)
battery pack must be recycled
or disposed of properly.


background image
EN
3
SOME DO'S AND DON'TS ON THE SAFE USE
OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards
but, like any electrical equipment, care must be taken if you are to obtain the best results and
safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the manufacturer's instruc-
tions. Switch off and withdraw the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equip-
ment.
DO be careful with glass panels or doors on equipment.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is
damanged in any way -- switch off, withdraw the mains plug and consult your dealer.
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed
for unattended operation or has a standby mode. Switch off using the switch on the equipment and
make sure that your family knows how to do this. Special arrangements may need to be made for
infirm or handicapped people.
DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements
of road safety. It is illegal to watch television whilst driving.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating
will cause damage and shorten the life of the equipment.
DON'T use makeshift stands and NEVER fix legs with wood screws -- to ensure complete safety always fit
the manufacturer's approved stand or legs with the fixings provided according to the instructions.
DON'T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
-- NEVER let anyone especially children push anything into holes, slots or any other opening in the case
-- this could result in a fatal electrical shock;
-- NEVER guess or take chances with electrical equipment of any kind -- it is better to be safe than sorry!
This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and LCD
monitor/viewfinder playback are possible
anywhere. Use the BN-V12U/BN-V20U battery
packs and, to recharge them, the provided
multi-voltage AC Power Adapter/Charger. (An
appropriate conversion adapter may be
necessary to accommodate different designs of
AC outlets in different countries.)
This unit is produced to comply with Standard
IEC Publ. 65.
This camcorder is designed exclusively for the
VHS-C video cassette. Only cassettes marked
VHS-C can be used with this unit.
HQ VHS is compatible with existing VHS
equipment.


background image
4 EN
MAJOR FEATURES
PROVIDED ACCESSORIES
·AC Power
Adapter/Charger
AA-V15EK
· Cassette Adapter
C-P7U
·Shoulder Strap
·Battery Pack
BN-V12U
·DC Cord
· Lithium Battery CR2025
x1 for clock operation
·Cable Adapter
REMEMBER
Programme AE with Special
Effects (
pg. 22, 23)
Electronic Fog Filter
ND Effect
Sepia
Twilight
Sports
Nega/Posi
1/2000 sec. High Speed Shutter
Menu Adjustment
(
pg. 26, 27, 28)
Picture Stabilizer (
pg. 20)
Digital Hyper Zoom
(
pg. 18)
Zoom in
Zoom out
LCD Colour Monitor
(
pg. 16)


background image
EN
5
A
B
3
1
2
3
2
1
Using the battery pack
Hook its end to the camcorder (
) and push the
battery pack in until it locks in place (
).
(Charging procedure,
pg. 6)
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery
pack.
QUICK OPERATION GUIDE
1 Set the Power Switch to "PLAY".
2 Press REW (2).
-- The tape will automatically stop at the
beginning of the tape.
3 Press PLAY/PAUSE (4/6).
-- Playback starts and the playback picture
appears.
·To stop playback, press STOP (5).
(For more details,
pg. 36)
·The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
·The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
Or simply play back the tape on a VHS VCR
using the Cassette Adapter
pg. 39
1 Turn the LENS COVER Open/Close Ring to
open the lens cover.
2 Set the Power Switch to "AUTO" or "PRO.".
-- The power lamp will light and an image
will appear.
3 Press the Recording Start/Stop Button.
-- Recording starts.
·To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
(For more details,
pgs. 14, 15)
·The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
·The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
SUPPLY POWER
INSERTING A VIDEO CASSETTE
PLAYBACK
SHOOTING
Set to "PLAY"
Hook on.
Push in.
BATTERY RELEASE
LENS COVER
Open/Close Ring
Set to "AUTO"
or "PRO."
Recording Start/Stop Button
REW (2) Button
PLAY/PAUSE
(4/6) Button
STOP
(5) Button
2
1
3
4
1 Open the LCD monitor to an angle of over 60
degrees.
2 Slide EJECT to open the cassette holder.
3 Insert a video cassette.
4 Press PUSH to close the cassette holder.
(For more details,
pg. 11)
PUSH Button
EJECT Switch