background image
No.86593
October 2000
GC-X3E-DS
DIGITAL STILL CAMERA
SPECIFICATIONS
STILL CAMERA
Regarding service information other than these sections, refer to the GC-X1E service manual (No.86572). Also,
be sure to note important safety precautions provided in the service manual.
Power source
Power consumption
Dimensions
Weight
Operating temperature
Relative humidity
Storage temperature
LCD screen
Storage media
CCD
Focal distance
Lens
Video
Recording format
Sensitivity
Iris value (F value)
Exposure control
Exposure compensation
Minimum subject distance
Light measurement system
Flash
Recommended distance for flash
Shutter speed
White balance
Focus
: DC 5 V
: 3.6 W (when the LCD screen is off)
4.8 W (when the LCD screen is on)
: 111 (W) mm x 67 (H) mm x 59 (D) mm
(except protruding parts)
: Approx. 290 g
(without a Memory card and battery)
:0
°C to 40°C
: 35% to 80%
: ­20
°C to 50°C
: 2.0 inch, polysilicon TFT (200,000 pixels)
: SmartMediaTM 3.3V (up to 64MB)
: 3.34 million pixels (3.24 million valid pixels),
1/1.8" square pixels, primary color filter,
interlace scan CCD
: 7.5 mm to 17.5 mm
(equivalent to 37mm to 86 mm on a 35 mm still camera)
: 2.3X optical zoom lens
: 160 pixels x 120 pixels, 20 seconds, JVC original format
: Exif Ver. 2.1 (DCF compliant), TIFF (Uncompressed),
DPOF-compatible
: 80/160/320 (ISO compliant)
: F2.8/3.8, 5.6, 8, 11
: Program AE, iris priority AE
:
±2EV (0.5EV steps)
: Approx. 2 cm to 50 cm (in Macro mode)
: Multi, spot
: Built-in,
Auto/red-eye prevention/forced/disabled
: Approx. 2.5 m
: Auto (Program AE: 1/8 seconds ­ 1/750 seconds,
Iris priority AE: 2 seconds ­ 1/750 seconds )
: Auto/Manual (
,
,
, MWB,
)
: Auto/Manual
Self timer
Photo quality
Number of storable photos
(with an 8MB Memory card,
STANDARD/FINE/NO COMP.)
Battery
Printer connector
VIDEO output connector
Digital output connector
: 1 second, 8 seconds
: 3 modes (STANDARD/FINE/NO COMP.)
: 2032 x 1536: approx. 10/8/0
1024 x 768: approx. 43/32/3
640 x 480: approx. 87/65/8
: Lithium ion battery
: Output for optional printer
: Two-pole plug, 3.5 mm diameter (PAL)
: Mini-USB connector
AC Power Adapter/Charger AA-V37
E. & O. E. Design and specifications subject to change without notice.
: AC 110 V ­ 240 V`, 50 Hz/60 Hz
: 14 W
: DC 3.6 V
, 0.77 A
: DC 5.0 V
, 1.5 A
:0
°C to 40°C [when charging: 10°C to 35°C]
: 68 (W) mm x 38 (H) mm x 110 (D) mm
: Approx. 230 g (without a DC cord)
Power requirement
Power consumption
Output
Charge
Camera
Operating temperature
Dimensions
Weight
SERVICE MANUAL


background image


background image
TABLE OF CONTENTS
Section
Title
Page
I
mportant Safety Precautions
DIFFERENT TABLE
1. DISASSEMBLY
1.3.2 Disassembly method ( I ) ............................................ 1-1
2. ELECTRICAL ADJUSTMENT
2.1
ELECTRICAL ADJUSTMENT .......................................... 2-1
2.1.1 Precautions ................................................................. 2-1
2.1.2 Test instruments required for electrical adjustment ............. 2-1
2.1.3 Required test equipment ............................................ 2-1
2.1.4 Setup (LCD ADJUSTMENT) ........................................ 2-1
2.1.5 Setup (CCD ADJUSTMENT) ....................................... 2-2
2.2
Setup with patch cords and jig connector cables ............ 2-3
3. CHARTS AND DIAGRAMS
NOTES OF SCHEMATIC DIAGRAM ........................................ 3-1
CIRCUIT BOARD NOTES ......................................................... 3-2
3.1
BOARD INTERCONNECTION ......................................... 3-3
3.2
MAIN (SYSCON) SCHEMATIC DIAGRAM ...................... 3-5
3.3
MAIN (DSP146) SCHEMATIC DIAGRAM ........................ 3-7
3.4
MAIN (DSP97) SCHEMATIC DIAGRAM .......................... 3-9
3.5
MAIN (CDS AGC A/D AND ARM ROM)
SCHEMATIC DIAGRAM ................... 3-11
3.6
MAIN (STROBE CONTROL AND AUDIO ) AND
STROBE FLASH SCHEMATIC DIAGRAMS ........ 3-12
3.7
MAIN (F/Z_MDA / IRIS) SCHEMATIC DIAGRAM ......... 3-13
3.8
JACK (VIDEO OUT/USB/PRINTER/DC JACK/
MONITOR BACK LIGHT) SCHEMATIC DIAGRAM .... 3-14
3.9
CCD SCHEMATIC DIAGRAM ........................................ 3-15
3.10 MONI REG (MONITOR) SCHEMATIC DIAGRAM ......... 3-16
3.11 MONITOR REG (DC/DC) SCHEMATIC DIAGRAM ........ 3-17
3.12 MAIN CIRCUIT BOARD ................................................ 3-19
3.13 MONITOR REG CIRCUIT BOARD ................................. 3-25
3.16 JACK CIRCUIT BOARD ................................................. 3-27
3.18 CCD CIRCUIT BOARD .................................................. 3-29
3.20 STOROBE FLASH CIRCUIT BOARD ................................. 3-31
3.22 OVER ALL BLOCK DIAGRAM ....................................... 3-33
4. PARTS LIST
4.1
PACKING AND ACCESSORY ASSEMBLY <M1> ........... 4-1
4.3
FINAL ASSEMBLY <M2> .............................................. 4-3
4.4
ELECTRICAL PARTS LIST ............................................... 4-6
MAlN BOARD ASSEMBLY <01> .................................... 4-6
CCD BOARD ASSEMBLY <02> .................................... 4-11
MONI REG BOARD ASSEMBLY <03> ......................... 4-12
JACK BOARD ASSEMBLY <04> .................................. 4-14
STROBE FLASH BOARD ASSEMBLY <05> ................. 4-15
The following table indicate main different features between models GC-X1E, GC-X3E and GC-QX5HDU.
MODEL
GC-X1E
GC-X3E
ITEM
Operating Environment
The host computer that runs the Macintosh®
operating environment must satisfy the following
conditions.
USB Driver
1. USB-compatible computer (iMacTM, iBookTM,
Power MacTM G3/G4, Power BookTM G3, etc.)
2. Mac OS 8.5.1/Mac OS 8.6/Mac OS 9.0
JVC Video Decoder
1. Power PC 603e/120MHz or faster
2. Mac OS 7.6.1 or later
3. QuickTime 3.0 or later
4. Minimum RAM requirement: 32MB
5. Minimum hard disk space requirement: 1MB
* Macintosh® is a registered trademark of Apple
Computer.
* Other trademarks are property of their respective
owners.
* If you use Macintosh® which does not have a USB
port, use an optional flash path, conversion card
adapter, etc. For details on the operating environ-
ment of these devices, contact the dealers or
manufacturers.
SOFTW ARE SECTION FOR Macintosh
®
Operating Environment
SOFTW ARE SECTION FOR Windows
®
The host computer that runs the Windows®
operating environment must satisfy the following
conditions.
USB Driver
1. Microsoft® Windows® 98/Windows® 98 Second
Edition, Full version (Not Upgrade)/Windows®
2000 Professional (Not Upgrade)
2. Available USB port
3. CD-ROM drive
Video Player
1. CPU: Intel® Pentium® 200MHz class or higher
2. Microsoft® Windows® 95/Windows® 98
3. Display capability of 65,536 colors or more
4. CD-ROM drive
5. Minimum RAM requirement: 32MB
6. Minimum hard disk space requirement: 1MB
* The system requirements information is not a
guarantee that provided software applications will
work on all personal computers meeting those
requirements.
* Microsoft®, Windows® are either registered
trademarks or trademarks of Microsoft corporation
in United States and/or other countries.
* Intel®, Pentium® are registered trademarks of Intel
corporation.
* Other trademarks are property of their respective
owners.
* If you use Windows® 95 or a personal computer
which does not have a USB port, use an optional
flash path, conversion card adapter, etc. For
details on the operating environment of these
devices, contact the dealers or manufacturers.
Installing the Film Copying Adapter
NO
YES
Shooting Film(Film Copy Mode)
NO
YES


background image
Note : Mark ­­ is not used.
The following table indicate different parts number between models GC-X1E, GC-X3E.
1
PACKING CASE
LY31465-003A
LY32048-003A
4
SHEET
LY42548-001A
­­­­
5
HOOD(OP)
LY31822-001A
­­­­
5A
POLY BAG
QPA01001505
­­­­
9
CD-ROM ASSEMBLY
LY31074-010A
LY31074-015A
13
FILM COPY ADAP.
­­­­
LY20687-001A
14
FILM HOLDER AS
­­­­
LY32047-001A
15
CUSHION(ACC)
­­­­
LY32050-001A
! 31
INST.BOOK(EN)
LYT0544-001C
LYT0670-001A
! 32
INST.BOOK(FR)
LYT0544-002A
LYT0670-002A
! 33
INST.BOOK(SP)
LYT0544-003A
LYT0670-003A
MODEL
GC-X1E
ITEM
PACKING ASSEMBLY <M1>
REF NO.
GC-X3E
Note : Mark ­­ is not used.
FINAL ASSEMBLY <M1>
OP BLOCK ASSEMBLY <M3>
Note : Mark ­­ is not used.
Note : Mark * reference model was also changed.
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E
203
OPTICAL BLOCK ASSEMBLY
LY31490-001B
LY31490-003A
221
TILT FRAME
*LY20716-001A
+
103
BOARD HOLDER ASSEMBLY
LY31457-002A
LY31457-007B
107C
SHEET
LY30023-016A
LY30023-016A
110
TOP COVER ASSEMBLY
LY31460-002A
LY31460-008B
111
OPERATION UNIT
LY20521-002C
LY20521-007B
113
SPACER(A)
LY30029-016A
­­­­
118
MICROPHONE
­­­­
LY31454-001A
130
SHEET
­­­­
LY42890-001A
131
SPACER(A)
­­­­
LY30029-0C2A
152
REAR COVER ASSEMBLY
LY20519-002B
LY20519-008B
153
FRONT COVER ASSEMBLY
LYH20147-003A
LYH20222-005A
153A
FRONT COVER
LY20516-002A
LY20516-010A
153B
GRIP
LY42320-001A
LY31444-002A
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E


background image
MAIN BOARD ASSEMBLY <01>
CCD BOARD ASSEMBLY <02>
MONI REG BOARD ASSEMBLY <03>
JACK BOARD ASSEMBLY <04>
STROBE BOARD ASSEMBLY <05>
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E
PW1
MAIN BOARD ASSEMBLY
YB10282P-06
YB10299E-03
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E
PW1
MAIN BOARD ASSEMBLY
YB10283P1-04
YB10300E1-02
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E
PW4
MONI REG BOARD ASSEMBLY
YB10283P4-04
YB10300E4-02
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E
PW2
JACK BOARD ASSEMBLY
YB10283P2-04
YB10300E2-02
MODEL
GC-X1E
ITEM
REF NO.
GC-X3E
PW3
STROBE BOARD ASSEMBLY
YB10283P3-04
YB10300E3-02