background image
COLOUR
TELEVISION
LCT0909-001B-U
0106-T-CR-JMUK
AV32P10EK
/
AV32P10EI
/
AV32L5EK
/
AV32L5EI
VICTOR COMPANY OF JAPAN, LIMITED
© 2001 VICTOR COMPANY OF JAPAN, LIMITED
INSTRUCTIONS
COLOUR TELEVISION
AV32P10EK
AV32L5EK
(UK model)
AV32P10EI
AV32L5EI
(Ireland model)
Contents
Specifications
Specifications
Specifications
Specifications
* A basic model number. The actual model number may have characters added (such as "S" denoting silver) indicating the colour
of the TV set.
We may change the design and specifications without notice.
Pictures displayed on the screen using this TV's ZOOM functions should not be shown for any commercial or demonstration pur-
pose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this
would be an infringement of copyright.
Model
Item
AV32L5EK* (UK model)
AV32L5EI* (Ireland model)
Broadcasting systems
CCIR I
Colour systems
PAL
· The EXT terminals also support the NTSC 3.58/4.43 MHz system.
Channels and frequencies
E21-E69
IR A-J, E2-E12, E21-E69, S1-S41, X, Y, Z,
Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2
Sound-multiplex systems
NICAM (I) system
Teletext systems
FLOF (Fastext), WST (World Standard Text)
Power requirements
220 - 240 V AC, 50 Hz
Power consumption
Maximum: 189 W, Average: 140 W, Standby: 2.8 W
Picture tube size
Viewable area 76 cm (measured diagonally)
Audio output
Rated Power output: 7.5 W + 7.5 W
Speakers
(20 cm
× 4 cm) oval × 2
EXT-1 terminal
Euroconnector (21-pin, SCART)
· Video input, Audio L/R inputs and RGB inputs are available.
· TV broadcast outputs (Video and Audio L/R) are available.
EXT-2 terminal
Euroconnector (21-pin, SCART)
· Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are available.
· Video and Audio L/R outputs are available.
· T-V LINK functions are available.
EXT-3 terminal
Euroconnector (21-pin, SCART)
· Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
EXT-4 terminal
RCA connectors
× 3
S-VIDEO connector
× 1
· Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
AUDIO OUT terminal
RCA connectors
× 2
· Variable audio L/R outputs are available.
· Variable out 0-1 Vrms, low impedance
Headphone jack
Stereo mini-jack (3.5 mm in diameter)
Dimensions (W
× H × D)
901 mm
× 556 mm × 557mm
Weight
53.9 kg
Accessories
Remote control unit
× 1 (RM-C56)
AAA/R03 dry cell battery
× 2
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
T-V LINK functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using your TV­the basics . . . . . . . . . . . . . . . . . . . . . . 8
Remote control buttons and functions . . . . . . . . . . . . . 11
Using the TV's menus. . . . . . . . . . . . . . . . . . . . . . . . 17
Picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Picture features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sound setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DIGITAL SURROUND (Only AV32P10EK and AV32P10EI) . . 23
EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Further preparation . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TV buttons and parts . . . . . . . . . . . . . . . . . . . . . . . . 41
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
AV28X10EKS_cover.fm Page 1 Thursday, July 5, 2001 12:00 PM


background image
2
AV32L5/P10EKEI / LCT0909-001A-U / English
Thank you for buying this
colour television.
To make sure you fully understand how to use your new TV, please read this manual thoroughly before
you begin.
Safety precautions
Safety precautions
Safety precautions
Safety precautions
I
I
I
I Warning
Warning
Warning
Warning
To prevent fire or shock hazard, do not expose
this appliance to rain or moisture.
I
I
I
I
Caution
Caution
Caution
Caution
To ensure personal safety, observe the following
rules regarding the use of this unit.
1 Operate only from the power source specified
(AC 220 ­ 240 V, 50 Hz) on the unit.
2 Avoid damaging the mains plug and power
cord.
3 Avoid improper installation and never position
the unit where good ventilation is unattainable.
When installing this television, distance
recommendations must be maintained
between the floor and wall, as well as
installation in a tightly enclosed area or piece of
furniture.
Please adhere to the minimum distance
guidelines shown for safe operation.
4 Do not allow objects or liquid into the cabinet
openings.
5 In the event of a fault, unplug the TV and call a
service technician. Do not attempt to repair it
yourself or remove the rear cover.
6 The surface of the TV screen is easily
damaged. Be very careful with it when handling
the TV.
Should the TV screen become soiled, wipe it
with a soft dry cloth. Never rub it forcefully.
Never use any cleaner or detergent on it.
7 The main power button on the TV does not fully
isolate the TV from the mains supply. If you are
not going to use this TV for a long period of
time, be sure to disconnect the mains plug from
the mains outlet.
I
I
I
I
Warning
Warning
Warning
Warning
DO NOT cut off the mains plug from this
equipment. If the plug fitted is not suitable for the
power points in your home or the cable is too short
to reach a power point, then obtain an appropriate
safety approved extension lead or adaptor or
consult your dealer.
If nonetheless the mains plug is cut off, remove
the fuse and dispose of the plug immediately, to
avoid a possible shock hazard by inadvertent
connection to the mains supply.
If a new mains plug has to be fitted, then follow the
instruction given below:
Important
Do not make any connection to the larger terminal
which is marked with the letter E or by the safety
earth symbol
or coloured green or green-and-
yellow.
The wires in the mains lead on this product are
coloured in accordance with the following code:
Blue:
Neutral
Brown: Live
As these colours may not correspond with the
coloured marking identifying the terminals in your
plug proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
When replacing the fuse only a correctly rated
approved type should be used and be sure to
re-fit the fuse cover.
If in doubt -- consult a competent
electrician.
How to replace the fuse
Open the fuse
compartment with a blade
screwdriver, and replace
the fuse.
15 cm
10 cm
10 cm
15 cm
Fuse
English.book Page 2 Monday, June 18, 2001 4:57 PM


background image
3
AV32L5/P10EKEI / LCT0909-001A-U / English
I
I
I
I
Guidelines for safe operation
Guidelines for safe operation
Guidelines for safe operation
Guidelines for safe operation
This equipment has been designed and manufactured to comply with international safety standards.
However, as with any electrical appliance, care must be taken to ensure optimal results and operational
safety.
· Before attempting to use this equipment, read the operating instructions thoroughly.
· Ensure that all electrical connections (including the mains plug, extension leads, etc.) have been made
in accordance with the manufacturer's instructions.
· If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.
· Handle all glass panels or covers with care.
· Never operate this equipment if it appears damaged or operates abnormally. Turn the power off,
disconnect the main power plug and consult your dealer.
· Never remove any affixed panels or covers. Doing so may result in electrical shock.
· Never leave this equipment operating unattended unless otherwise specifically stated that it is designed
to do so or in standby mode. Only use the designated power switch to turn off the power and ensure
that all potential users are instructed how to do so. Make special arrangements for infirm or handicapped
persons.
· Never listen to headphones at high volume. Doing so may damage your hearing.
· Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a
malfunction or damage.
· Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer's
approved stand or legs, use only the fixtures provided and follow the installation instructions.
· Never allow this equipment to be exposed to rain or moisture.
· Never allow anyone, especially children, to insert anything into an opening in the case. Doing so may
result in a fatal electrical shock.
· Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.
English.book Page 3 Monday, June 18, 2001 4:57 PM


background image
4
AV32L5/P10EKEI / LCT0909-001A-U / English
Setting up your TV
Setting up your TV
Setting up your TV
Setting up your TV
I
I
I
I Connecting the aerial and video cassette recorder (VCR)
Connecting the aerial and video cassette recorder (VCR)
Connecting the aerial and video cassette recorder (VCR)
Connecting the aerial and video cassette recorder (VCR)
If you are connecting a VCR, follow
A B C in the diagram opposite.
If you are not connecting a VCR, follow
1.
· For more details, see the manuals that came with the
equipment you want to connect.
· The connecting cables are not provided.
· You can watch a video using the VCR without doing C.
For details, see your VCR instruction manual.
· To connect more equipment, please see "Further
preparation" on page 37.
· To connect additional audio equipment, see "Using
additional audio equipment" on page 39.
· To connect other equipment (such as a DVD player) with
a digital output terminal for Dolby Digital, see "Listening
to
Dolby
Digital
audio
(Only
AV32P10EK
and
AV32P10EI)" on page 38.
· If you connect a decoder to a T-V LINK compatible VCR,
set the DECODER (EXT-2) function to ON. For details, see
"Using the DECODER (EXT-2) function" on page 35.
Otherwise, you will not be able to watch scrambled
channels.
To use the T-V LINK functions, you must have a T-V LINK
compatible VCR connected by a SCART cable
C to the EXT-
2 terminal on the TV. For details about T-V LINK functions,
see "T-V LINK functions" on page 7.
I
I
I
I Connecting the power cord to the mains outlet
Connecting the power cord to the mains outlet
Connecting the power cord to the mains outlet
Connecting the power cord to the mains outlet
Caution:
· Use only the power source specified on the unit
(AC 220 ­ 240 V, 50 Hz).
I
I
I
I Putting batteries into the remote control
Putting batteries into the remote control
Putting batteries into the remote control
Putting batteries into the remote control
Use two AAA/R03 dry cell batteries.
Insert the batteries holding the - end, making sure the + and
- terminals are correctly lined up.
To open the battery compartment, slide the door downwards
and lift off. Replace the door by sliding it upwards until it
fastens into place.
· Follow the warnings printed on the batteries.
· Battery life is about six months to one year, depending on
how much you use the remote control.
· If the remote control does not work properly, fit new
batteries.
· The batteries we supply are only for setting up and
testing your TV. Please replace them as soon as you
need to.
· Always use good-quality batteries.
EXT-
1
EXT-
2
S
EXT-
3
S
R
AUDIO OUT
SURROUND
REAR
L
SUB
WOOFER
OPTICAL
DIGITAL
AUDIO IN
COAXIAL
Aerial
75-ohm
coaxial
cable
21-pin SCART
cable
75-ohm
coaxial
cable
AV IN/OUT
terminal
To aerial
input
Back of the TV
VCR
To aerial
output
JVC TV_MF1.fm Page 4 Friday, June 29, 2001 11:18 AM


background image
5
Setting up your TV
AV32L5/P10EKEI / LCT0909-001A-U / English
I
I
I
I Initial settings
Initial settings
Initial settings
Initial settings
When the TV is first turned on, it goes into the initial setting
mode, and you will see the JVC logo. Follow the instructions
on the screen to make the initial settings.
1 Press the main power button on the TV
The power lamp lights red (for power on), then green (for
TV on) and the JVC logo appears.
· If the power lamp stays red and does not change to
green:
your TV is in the standby mode. Press the
#
(standby) button on the remote control to turn your
TV on.
· If the JVC logo does not appear this is because your
TV has already been turned on for the first time:
use the "LANGUAGE" and "AUTO PROGRAM"
functions to make the initial settings. For details, see
"INSTALL" on page 30.
2 Press the
a button
The LANGUAGE menu appears.
3 Press the 5 and 6 buttons to
choose ENGLISH
The on-screen display will then be in English.
D0001-EK
D0002(E)-EK
BACK
LANGUAGE
TV
OK
3D
1
2
3
4
5
6
7
8
9
0
P
AV
TV
OK
MENU
P
TV
PIP
main power
button
power lamp
yellow button
blue button
<AV32P10EK and AV32P10EI>
<AV32L5EK and AV32L5EI>
main power
button
power lamp
English.book Page 5 Monday, June 18, 2001 4:57 PM