GGT0009-001A-H
0703-NIC-JMT
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
COLOUR TELEVISION
INSTRUCTIONS
Thank you for buying this JVC
colour television.
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
AV-21W111
Contents
Safety precautions
2
Preparation
2
1 Insert the batteries into the remote control ... 2
2 Connecting the aerial and external devices ... 3
3 Connecting the power cord ........................ 4
4 SETUP TOUR .............................................. 5
Basic operation
6
Remote control buttons and functions
7
ECO SENSOR button ..................................... 7
COLOUR SYSTEM button ............................. 7
SOUND SYSTEM button ............................... 7
DISPLAY button ............................................. 8
button ....................................................... 8
CHANNEL SCAN button ................................ 8
MUTING button ............................................. 8
OFF TIMER button ......................................... 8
RETURN + button .......................................... 9
PICTURE MODE button ................................. 9
Using the TV's menus
10
Basic operation ............................................ 10
INPUT ........................................................... 11
VNR ............................................................... 11
ON TIMER ..................................................... 11
AUTO SHUTOFF .......................................... 12
CHILD LOCK ................................................. 12
BLUE BACK .................................................. 12
AI ECO DISPLAY .......................................... 12
AUTO CH PRESET ....................................... 13
SETUP TOUR ............................................... 13
LANGUAGE .................................................. 13
MANUAL CH PRESET .................................. 14
SKIP .............................................................. 15
Picture Adjustments .................................... 15
TV buttons and parts
16
Using the buttons on the TV
17
Troubleshooting
18
Specifications
19
GGT0009-21W111-E801_Cover
05/08/2003, 15:39pm
3
2
Safety precautions
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING
THE USE OF THIS TV.
· Operate only from the power source specified on the TV.
· Avoid damaging the power cord and mains plug. When you unplug the TV, pull it
out by the mains plug. Do not pull on the power cord.
· Never block or cover the cabinet openings
for ventilation. Never install the TV
where good ventilation is unattainable.
When installing this TV, leave spaces for
ventilation around the TV more than the
minimum distances shown in the
diagram.
· Do not allow objects or liquid into the cabinet openings.
· In the event of a fault, unplug the TV and bring to JVC service centre. Do not attempt
to repair it by yourself or remove the rear cover.
· The surface of the TV screen is easily damaged. Be very careful with it when
handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth.
Never rub it forcefully. Never use any cleaner or detergent on it.
·When you don't use this TV for a long period of time, be sure to disconnect the
power plug from the AC outlet.
· The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
Preparation
1 Insert the batteries into the remote control
Correctly insert two batteries, observing the , and . polarities and inserting the .
end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
· Use AA/R6/UM-3 dry cell batteries.
· If the remote control does not work properly, fit new
batteries.
The supplied batteries are for testing, not regular use.
15 cm
10 cm
15 cm
10 cm
GGT0009-21W111-E604
01/01/2032, 00:10am
2
3
Preparation
2 Connecting the aerial and external devices
·For further details, refer to the manuals provided with the devices you are connecting.
· Connecting cables are not supplied.
· The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either
jack is output through both. You cannot provide input to both the front and rear jacks at the
same time. Disconnect one input, or use one of the jacks as an output jack only (for
monitoring or recording).
Connecting the aerial and VCR
VHF/UHF outdoor aerial
VIDEO AUDIO
IN
OUT
Connecting the aerial
(1)
(2)
(3)
Matching
aerial
adapter
(supplied)
VIDEO AUDIO
IN
OUT
To RF
output
To video
output
To aerial input
To audio
output
3
2
VCR
VHF/UHF outdoor aerial
1
Connecting the aerial and VNR
GGT0009-21W111-E604
01/01/2032, 00:11am
3
4
Preparation
Connecting other external devices
· Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
VIDEO AUDIO
IN
OUT
VCR (for recording)
VCR (for playing)
To audio
output
To video
output
To audio
input
To video
input
VIDEO
AUDIO
MENU
IN
To audio
output
To video
output
Headphones
Camcorder
or
TV game
3 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
GGT0009-21W111-E604
01/01/2032, 00:11am
4
5
Preparation
4 SETUP TOUR
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo
is displayed. Follow the instructions on the on-screen display to perform the SETUP
TOUR.
· In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET
function on the "MENU 3" menu. For details, see page 13.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
TV automatically switches to the
language setting mode.
SETUP TOUR
2 Press the MENU
M buttons
to select the on-screen
language.
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
EXIT BY
OPERATE BY -+
DISPLAY
3 Press the MENU
y button.
The AUTO PROGRAMMING
function will start and the
indicator blinks.
STOP BY -+
SETUP TOUR
NOW PROGRAMMING
·To stop the AUTO PROGRAMMING
function, press the MENU
m
buttons.
When all the TV channels that can
be received on your TV have been
preset, the display goes out and the
AUTO PROGRAMMING function
operation is completed.
· If a TV channel you want to view is not
set to the channel, set it with the
MANUAL CH PRESET function. For
details, see page 14.
4 Upon the completion of AUTO
PROGRAMMING function, the
message below is displayed.
SETUP TOUR
THANK YOU!
ON TIMER
POWER
RETURN
+
0
-/--
CHANNEL
SCAN
DISPLAY
MENU
VOLUME
MUTING
DISPLAY
button
MENU
/
buttons
MENU /+
buttons
CHANNEL
POWER lamp Main power button
GGT0009-21W111-E604
01/01/2032, 00:11am
5