background image


background image
Usage cautions to ensure correct usage
The following symbols are used to ensure safe usage of the product, to prevent danger to yourself and other
parties and to prevent damage to property.
Symbols
This symbol indicates that incorrect handling due to ignoring this symbol
can result in the possibility of personal injury or even death.
This symbol indicates additional
cautions (including warnings).
WARNING
Caution
(general)
This symbol indicates forbidden
actions.
This symbol indicates required actions.
Safety Cautions
Contact your
local dealer.
Disconnect the
power plug from
the power outlet.
When a malfunction occurs, disconnect the power
plug from the power outlet and take measures to
prevent other people coming near the plasma
display.
In the cases such as
The plasma display is loose and vibrates to an extreme degree,
Mounting screws or parts are loose or missing,
failure to take appropriate actions can result in injury.
Perform the following actions immediately whenever a
malfunction occurs.
Turn off the plasma display power switch.
Disconnect the power plug from the power outlet.
Surround the area with rope, etc., to prevent other people
coming near.
Contact your local dealer.
Ask your dealer to install, move or adjust the wall-
mount unit.
Incorrect installation or adjustment can cause the plasma display
to fall.
Handling by other than
professional contractors
is prohibited.
This symbol indicates that incorrect handling due to ignoring this symbol
can result in the possibility of personal injury and physical damage.
CAUTION
Forbidden
(general)
Required
(general)
Disassembly
prohibited
Indicates that the power plug is to be
disconnected from the power outlet.
WARNING


background image
Pillar or
thick ply wood.
Plaster board or
thin ply wood, etc.
The wall where the wall-mount unit is to be
installed must be capable of long-term
support of the total load of the plasma display
and wall-mount unit. Measures should also be
taken to ensure sufficient strength to
withstand the force of earthquakes, vibration
and other external forces.
Incorrect installation can cause the plasma display to fall
and cause injury.
Installation on a wooden wall
Always install so that the load is supported by a piller. If the
strength of the piller is insufficient, add reinforcement. Do
not install on plasters or decorative posts.
Installation on a concrete wall
Use commercially available anchors that are capable of
fully supporting the load of the plasma display.
10cm
or more
10cm
or more
10cm
or more
Avoid installing in
locations where the
temperature and
humidity are
excessively high,
and where contact
with water is
possible.
These can result in fire
or electrical shock.
Installation Location
WARNING
CAUTION
Do not install close
to an air-
conditioner intake
or outlet.
Do not install in
locations where
there is excessive
amounts of dust,
oily smoke or
tobacco smoke.
Fire could result.
Do not block the
ventilation holes.
Also provide
sufficient clearance
in regard to the
surroundings to
avoid blocking the
ventilation.
The internal
temperature could
elevate and possibly
result in fire.
Mount only on a
vertical, rigid wall
surface.
The internal
temperature could
elevate and possibly
result in fire.
Injury or damage could
also result from falling.
Model 50 Total load of the (plasma display + wall-mount unit) = 52.7kg


background image
Installing
CAUTION
Do not install in
locations where
there is excessive
vibration or impact.
Injury and damage
could result from
falling.
WARNING
Do not install where
there is direct
sunlight and other
strong light.
Strong light could result
in eye fatigue during
usage.
Use the specified
bolts and screws in
the specified places
and tighten firmly.
Failure to do this could
cause injury if the
plasma display falls.
Make sure the
display fittings and
wall-mount fittings
are firmly engaged.
Failure to do so could
cause the plasma
display to fall.
Do not alter any of
the parts. And do
not use broken
parts.
This could result in
injury due to the
plasma display falling.
Always use at least
two people to
perform the
installation work.
Injury could result from
dropping heavy
objects.
Use care to prevent
the fingers being
caught.


background image