background image
Plasma
Display
October 2002
SERVICE MANUAL
SERVICE MANUAL (Rev. B)
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury,
harmful radiation and materials, various measures are provided in this Plasma display.
Be sure to read cautionary items described in the manual to maintain safety before servicing.
1. Since Panel Module and Front Filter are made of glass, handling of the broken Module and
Filter shall be handled carefully in order not to be injured.
2. Replacment work shall be started after the Panel Module and the AC/DC Power supply become
sufficiently cool.
3. Special care shall be taken to the display area in order not to damage its surface.
4. The Panel Module shall not to be touched with bare hand to protect its surface from stains.
5. It is recommended using clean soft gloves during the replacment work in order to protect not
only the display area of the Panel Module but also the serviceman himself.
6. The Chip Tube of Panel Module (located upper left of the back) and flexible cables connecting
Panel glasses to drive circuit PWBs are very weak, so sufficient care should be taken so as
not to break them. If you break the Chip Tube, the Panel will not display any more.
1. Features
2
2. Specifications
2
3. Lead free solder
3
4. Names of each part
4
5. Trouble shooting
5
6. Block diagram
14
7. Disassembly Diagram
15
8. Re-Adjustment
18
9. Wiring Drawing
22
10. Replacement Parts list
24
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Caution
Contents
Serviceman Warning
CMP4120HDE
CMP4120HDJ
CMP4120HDU
SM0062


background image
1. Features
42 inches Hi-Vision compatible high-definition color plasma display panel
Newly developed Multi-scanning converter provides a multiscan converage of TV signals
through to PC analog signals (24 kHz to UXGA(106 kHz))
Large high-quality display images free from color misconvergence and display distortion,
as well as from geomagnetic effect and the magnetic effect of ambient power lines
2. Specifications
PDP Module
42 inch ALIS PDP panel (aspect ratio 16:9)
Description FPF42C128128UA-27
Pixel pitch
0.90 mm(H) x 0.51 mm(V)
Pixel structure RGB striped
Brightness
300cd/m
2 (typical) in dark room
Contrast
700:1 (typical) with front filter
RGB 1
(mD-15p)
RGB 2
(BNCx5)
Video
: 0.7 Vp-p
Sync.
: Separate H/V, TTL level
Composite H/V, TTL level
Sync. on Green at 0.30 Vp-p
Video 1
(BNCx1, S-
terminalx1)
Composite Video or S-video (forS1, S2)
NTSC3.58 NTSC4.43 PAL M-PAL N-PAL( SECAM)
Video : Composite 1.0 V
S-video
Y: 1.0 Vp-p, C:0.29Vp-p
Sync. : Composite sync
Input
Signal
Video 2
(BNCx3)
Component Video
Y,Pb,Pr or Y,Cb,Cr: (480I,480P,575I,720P,1080I)
Video :
Y : 1.0 Vp-p
Pb/Cb,Pr/Pr : 0.7 Vp-p
Sync. : Superimposed with Y signals
Colors
16.777 million
Synchronization
Horizontal : 24 ­106 kHz
Vertical
: 50 ­ 85 Hz
Resolution
Horizontal : 1024 dots (max.)
Vertical
: 1024 lines (max.)
Viewable Image Size 42 inches (1060 mm), diagonal (typical)
Viewable Image Area Horizontal : 922 mm (typical)
Vertical
: 522 mm (typical)
Color Temperature
1: Cool
2: Norm
3: Warm 4:User
Warm-up Time
30 minutes to reach optimum performance level.
Power Supply
AC 100 - 120 / 200 - 240 V (5.0A /2.5A)
50/60 Hz
(automatically selected)
Power Consumption :
450 W (typical)
(provided with power save circuit.)
Dimensions
1037 (W)
648 (H)
89 (D) mm
Weight
36.6 kg (approx.) with stand
Environmental
Condition
Operation
Storage
Temperature
5ºC to 35ºC
15ºC to 60ºC
Humidity
20% to 80%
20% to 90%
2


background image
3. Names of each part
Outlook
FRONT VIEW
Filter
Panel
Front
Frame
Power
Switch
STAND(Option)
Control
Switches
REAR VIEW
Rear
Cover
RGB Input Terminals
Video Input Terminals
Speaker
Terminals
AC Inlet
Input terminal(D-sub connector)
PinNo
Signal
1
Red Video
2
Green Video (Sync. optional)
3
Blue Video
4
No connection
5
No connection
6
Red Ground
7
Green Ground
8
Blue Ground
9
No connection
10
Ground
11
No connection
12
SDA
13
H.Sync. (or H/V composite)
14
V.Sync. V.CLK
15
SCL
Message table
Onscreen display
Indication
Condition
The monitor indicates the
message
"POWER SAVE".
The monitor detects no
sync signal.
The monitor indicates the
message
"OUT OF FREQUENCY".
The monitor detects a
sync signal which is out
of specification, or
unstable.
3


background image
4. Trouble shooting
Are
Voltage
applied to pins
, (PAS)
of the Signal PWB
+5.6V
+4.4V
GND
Signal PWB
Speaker
AC/DC
Power unit
No
Yes
Power can not be turned on (LED is not light)
Is the input voltage
applied to the AC/DC
Power unit ?
(J01
,
)
AC inlet
Power switch
AC Fuse
F901 12A250V
No
Yes
Picture is displayed. But no sound
Are
Voltage
applied to pins
(J104)
of the AC/DC Power
unit
No
AC/DC
Power unit
Yes
+25 30V
GND
No
Are
there
signals on
Speaker Terminals
Yes
Video PWB
4


background image
No
No
No
Is Voltage
of the pin
(PAS)
on the Signal PWB
high
Is the LED
red or green
Picture is not displayed (LED is lighting)
Do the Fans
rotate?
red
green
Yes
high (5V)
Are
Voltage
applied to pins
(PAS)
of the Signal PWB
No
AC/DC
Power unit
Signal PWB
low (0V)
Yes
AC/DC
Power unit
Is pin
of
J106 1 V more?
No
DC Fan
Yes
AC/DC
Power unit
Is Voltage
of the pin
(J104)
on the AC/DC Power
unit 5V
AC/DC
Power unit
Are Voltages
of the pin
(J103)
on the AC/DC Power
unit collect ?
+165V
+ 70V
GND
Are Voltages
of the DC/DC Power
unit collect
Is Voltage
of the pin
(J102)
on the AC/DC Power
unit collect ?
Yes
No (1.5V)
+3V
GND
Yes
Panel
Module
Panel Module
DC/DC
Power unit
See page 6
AC/DC
Power unit
+5.6V
GND
Yes