background image
COLOUR MONITOR
CM715ET
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
For future reference, record the serial number of your color monitor.
SERIAL No.
The serial number is located on the rear of the monitor.
This monitor is ENERGY STAR
®
compliant when used with a
computer equipped with VESA DPMS.
The ENERGY STAR
® emblem does not represent EPA endorsement
of any product or service.
As an ENERGY STAR
® Partner, Hitachi,Ltd. has determined that this
product meets the ENERGY STAR
® guidelines for energy efficiency.
USER MANUAL
MANUEL D'UTILISATION
BEDIENUNGSANEITUNG
MANUAL DE USUARIO
MANUALE DI ISTRUZIONI


background image
1
Table of Contents
Introduction ..................................................................... 2
Features
Package Overview
Cautions........................................................................ 3
TCO'99 Statement ..........................................................6
For the Customers in the UK ...........................................8
Installation ......................................................................10
User Controls.................................................................11
Osd Function Description .............................................12
Osd Icon Summary .......................................................13
Specifications .................................................................14
Troubleshooting ..............................................................15
Monitor


background image
2
INTRODUCTION
Congratulations on your purchase of this high performance
19"moniter.
Using state-of-the-art electronics, this monitor can support up to 1600 x 1200
resolution. The on-screen display(OSD) allows you to customize the display
setting to suit your individual needs.
Features
19-inch monitor with a large, 350 x
260
mm
viewable
screen
for
comfortable viewing.
OSD controls for easy and accurate
adjustment of the screen image.
Energy Star compliant to reduce
power consumption.
Package Overview
Please make sure the following items are in the shipping packing and found in
good condition:
* 19" Monitor
* Power cord
* Tilt and swivel stand
* This manual
Please save this packing material in case the monitor needs warranty service in the
future.


background image
3
CAUTIONS
NEVER REMOVE THE REAR COVER !
The rear cover MUST be removed only by authorized service personnel. This colour monitor
contains high voltage components.
THE RECEPTACLE SHOULD BE CLOSE TO THE MONITOR AND EASILY ACCESSIBLE !
INSTALL THE UNIT IN A SUITABLE ENVIRONMENT !
DO NOT expose this monitor to rain or moisture to prevent electric shock or fire hazard. This unit
is designed to be used in an office or business environment.
DO NOT subject the unit to vibrations, dust, or corrosive gases.
KEEP IN A WELL VENTILATED PLACE !
DO NOT cover this monitor or place anything against any sides (not only the top, right and
left
side but also the rear and bottom side) of unit. Ventilation holes are provided at all sides of the
rear cover to prevent the temperature from rising.
KEEP AWAY FROM HEAT SOURCES !
AVOID placing the unit in direct sunshine or near a heating appliance.
BE CAREFUL OF MAGNETIC FIELDS !
DO NOT place a magnet, loudspeaker system, floppy disk drive, printer, or anything which will
generate magnetism near the unit. A magnetic field may cause blurred colours or distortion of the
displayed pattern.
BE CAREFUL OF GENERATED MAGNETISM !
After the power has been turned on or "DEGAUSS" button has been pressed, the CRT is
demagnetized for approximately 10 seconds. This generates a strong magnetic field around the
front cover which may affect the data stored on magnetic tape or disks near the front cover. Place
such magnetic recording equipment and tapes/disks away from this unit.
AMBIENT ILLUMINATION
Avoid direct rays of the sun or room lighting onto the CRT screen in order to prevent eye fatigue.
THE ENCLOSED POWER CORD MUST BE USED !
In Europe, a proper European standard approved power cord is to be used with this monitor.
For
a rated current up to 6 A, a type not lighter than H05VV-F 3G 0.75 mm
2 or H05VVH2-F 3G 0.75
mm
2 must be used.


background image
4
USE ONLY THE CORRECT VOLTAGE POWER OUTLET WITH SAFETY
GROUND
CONNECTION !
200 - 240 V for Europe, etc.
CAUTION for 200 - 240V operation only
This equipment relies on the protective devices in the building installation for short-circuit and
over-current protection. Refer to the following table for the suitable number and location of the
protective devices which should be provided in the building installation.
Informative examples of
protective devices in single - phase equipment or sub - assemblies
Protection
against
Minimum number of
fuses or circuit -
breaker poles
Location
Case A: Equipment to be
connected to POWER SYSTEMS
with earthed neutral reliably
identified, except for Case C below.
Earth faults
Overcurrent
1
1
Phase conductor
Either of the two
conductors
Case B: Equipment to be
connected to any supply, including
IT POWER SYSTEMS and
supplies with reversible plugs,
except for Case C below.
Earth faults
Overcurrent
2
1
Both conductors
Either of the two
conductors
Case C: Equipment to be
connected to 3-wire power
systems with earthed neutral
reliably identified.
Earth faults
Overcurrent
2
2
Each phase conductor
Each phase conductor
Verify that the protective devices in the building installation meets the conditions in the table prior
to installing the equipment.
BE CAREFUL OF POWER CORD CONNECTION !
Before inserting the plug of the power cord into a receptacle of the correct voltage, check that the
connection portion of the power cord is clean (with no dust). Then, insert the plug of power cord
to a receptacle firmly, otherwise it may cause electrical shock or fire.
REMOVE THE POWER CORD FOR COMPLETE SEPARATION !
For complete separation from the power source, remove the power cord from the monitor or from
the wall outlet.
AVOID FREQUENT POWER ON-OFF SWITCHING !
DO NOT repeat OFF and ON in a short period. It may cause blurred colours or distortion of the
displayed pattern.