Users
Guide
CL32PD2100
CL37PD2100
CL42PD2100
SCREEN
X832136-02-02.qxd
11/19/01
10:44 AM
Page 1
Software Notice
It is prohibited for the end user of this product to copy, reverse engineer or
reverse compile the software included therein, save to the extent permitted by
law.
Caution
To prevent scratching or damaging the plasma screen face, do not knock
or rub the surface with sharp or hard objects. Clean the screen with a soft cloth
moistened with warm water and dry with a soft cloth. A mild soap may be used
if the screen is extremely dirty. Do not use harsh or abrasive cleaners!
TruBass
TruBass and the
symbol are trademarks of SRS Labs, Inc.
TruBass technology is incorporated under license from SRS Labs, Inc.
Important
Dear HITACHI customer
Congratulations on your purchase of the very latest state of the art television
from HITACHI. At Hitachi we pride ourselves on producing high quality televisions
with outstanding picture and audio capabilities. Together with our reputation for
superior reliability, you should enjoy many years of trouble free operation from
your TV.
Please read this Users Guide thoroughly, especially the Safety
Notes on Pages 4 & 5. Mis-use may cause damage to your plasma
television, which could shorten its lifespan, or cause injury to
yourself. Should you encounter any difficulty in the set-up or
operation of your television, firstly refer to the Trouble Shooting
Guide at the rear of this manual.
In the unlikely event of a problem occurring with your plasma TV, switch off at
the mains sockets, pull out the plugs, and contact your dealer immediately.
Under no circumstances remove the rear cover of your plasma
screen or the casing of your Audio VIsual Control (AVC) unit.
Never guess or take any chances with electrical equipment of
any kind - it is better to be safe than sorry!
Plasma Screen
After the plasma screen has been on for any length of time, you will notice
that the screen becomes warm. Please note that this is normal.
X832136-02-02.qxd
11/19/01
10:44 AM
Page 2
contents
contents
safety aspects
television safety ................................................................................4
battery safety and installation............................................................6
rear socket and scart details. ..............................................................7
set-up
plasma screen, AVC unit and equipment connection ......................8
front control panel details......................................................................10
handset controls
programme tuning ............................................................................11
television/VCR operation....................................................................12
Teletext functions ..............................................................................13
tuning in
TV set up and automatic tuning procedure ......................................14
manual tuning procedure ..................................................................16
programme sort ................................................................................18
programme name change and download ........................................19
viewlink ..............................................................................................20
customer I.D. ....................................................................................22
password change ..............................................................................23
programme, sound and vision adjustment
picture controls ..................................................................................24
NICAM and stereo sound controls ....................................................25
audio and TruBass controls ..............................................................26
television features
sleep timer and on screen display ....................................................28
wide screen viewing ..........................................................................29
Teletext operation ............................................................................31
other equipment
other equipment connection ............................................................32
signal source entry ............................................................................33
other features
language and installation ..................................................................35
programme download and demo mode ..........................................36
screen saver, screen wipe & no signal shutdown ............................37
PC mode ............................................................................................38
information
trouble shooting guide ......................................................................41
guarantee ..........................................................................................42
HITACHI environmental notice ..........................................................43
technical data ....................................................................................44
3
Please Note
The television illustrated throughout this manual is the CL32PD2100. Other
models differ in appearance, but controls and functions remain the same.
X832136-02-02.qxd
11/19/01
10:44 AM
Page 3
DO NOT remove any fixed cover as this
may expose dangerous voltages.
DO NOT position the plasma screen on top of
the AVC unit as it could cause damage to the
unit.
4
television
safety
safety
aspects
This plasma television has been designed and manufactured to meet international
safety standards, but like any electrical equipment, care must be taken if you are to
obtain the best results and safety is to be assured.
DO NOT continue to operate the
equipment if you are in any doubt about it
working normally or if it is damaged in
any way - switch off, withdraw the mains plug
and consult your dealer.
DO be careful with any glass panels or
doors on equipment.
DO consult your dealer if you are in any
doubt about installation, operation or safety of
your equipment.
DO place your TV on a flat surface, or if
supplied, the stand accessory.
DO ensure that all connections,
(including the mains plug, extension
leads and inter-connections between the
pieces of equipment), are properly made
and in accordance with the
manufacturers instructions. Switch off
and withdraw the mains plug before
making or changing connections.
DO NOT listen to headphones at high
volume, as such use can permanently
damage your hearing.
SHOULD you require to replace the fuse in
the moulded plug with a new fuse, then
please replace with one of the same value,
type and approval as the original. Ensure the
fuse cover is returned to its original position.
TO prevent scratching or damaging the
plasma screen face, do not knock or rub the
surface with sharp or hard objects. Clean the
screen with a soft cloth moistened with warm
water and dry with a soft cloth. A mild soap
may be used if the screen is extremely dirty. Do
not use harsh or abrasive cleaners!
IF you intend placing this TV into a cabinet or
a wall alcove, please ensure there is at least
a 100mm (10cm) gap to the sides, rear and
top of the TV. This is to allow for adequate
ventilation during your TV's operation.
DO read the operating instructions before
you attempt to use the equipment.
DO observe the manufacturers instructions
when connecting extension leads to your TV.
The fuse should be a 5 Amp fuse with the
safety symbols
and
displayed. If
you are in any doubt about the extension
installation, please consult a competent
electrician.
X832136-02-02.qxd
11/19/01
10:44 AM
Page 4
DO NOT cut off the fitted mains plug as it
may contain a special radio interference
filter, the removal of which could lead to
impaired performance. If you wish to
extend the lead, obtain an appropriate
extension lead or consult your dealer.
DO NOT leave equipment switched on
when it is unattended unless it is
specifically stated that it is designed for
unattended operation or has a stand-by
mode. Switch off using the switch on the
equipment and show your family how to do this.
Make special arrangements for infirm or
handicapped people.
NEVER guess or take
chances with electrical
equipment of any kind - it is
better to be safe than sorry!
television
safety
safety
aspects
NEVER let anyone, especially children,
push anything into holes, slots, or any
other opening in the case - this could
result in a fatal electrical shock.
Under NO circumstances remove the rear
cover of your plasma screen or the casing
of your Audio Visual Control (AVC) unit!
DO NOT place objects filled with liquids, e.g.
a vase, on, or close to the equipment, to
avoid spillages into the inside of the
apparatus.
DO NOT place hot objects such as candles or
nightlights on, or close to equipment. High
temperatures can melt plastic and lead to
fires.
DO NOT obstruct the ventilation of the
equipment, for example with curtains or soft
furnishings. Overheating will cause damage
and shorten the lifespan of your equipment.
DO NOT use makeshift stands and NEVER fix
legs with wood screws - to ensure complete
safety, always fit the manufacturers approved
stand or legs with the fixings provided
according to the instructions.
DO NOT allow electrical equipment to be
exposed to rain or moisture.
DO NOT lie the plasma screen flat.
5
X832136-02-02.qxd
11/19/01
10:44 AM
Page 5