background image
Module No. 2117/2265/2275
GENERAL GUIDE
· Press B to change from mode to mode.
· After you perform an operation in any mode, pressing B returns to the Timekeeping Mode.
· Holding down C at any time illuminates the display.
· Frequent use of the backlight shortens the battery life.
· If you do not perform any operation for a few minutes in Alarm Mode and Time Setting Mode, the watch automatically reverts to the normal timekeeping screen.
Stopwatch Mode
Time Setting Mode
Timekeeping Mode
Alarm Mode
TIMEKEEPING MODE
· In the Timekeeping Mode, press A to switch between
the 12-hour and 24-hour formats.
· When using 12-hour format, a P appears on the display
for "pm" times (noon to 11:59 pm). An "am" time (mid-
night to 11:59 am) is indicated when there is no P indi-
cator on the display. 24-hour format is being used when
the 24 indicator is on the display.
· Day of the week is displayed as follows.
SU: Sunday
MO: Monday
TU: Tuesday
WE: Wednesday
TH: Thursday
FR: Friday
SA: Saturday
ALARM MODE
When the Daily Alarm is switched on, the alarm sounds
for 20 seconds at the preset time each day. When the
Hourly Time Signal is switched on, the watch beeps ev-
ery hour on the hour.
To set the alarm time
1. Press C while in the Alarm Mode. The hour digits flash
because they are
selected.
At this time the Daily Alarm is switched on automatically.
2. Press C to change the selection in the following se-
quence.
Minutes
Hour
Normal Alarm Mode
(No digit flashes)
3. Press A to increase the selected digits. Holding down A changes the number at
high speed.
· The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
· When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon (PM).
4. After you set the alarm time, use C to return to the Alarm Mode.
To stop the alarm
Press C to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press A while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm on Indicator/Hourly Time Signal on Indicator]
Both ON
Both OFF
Daily Alarm
only
Hourly Time
Signal only
To test the alarm
Hold down A while in the Alarm Mode to sound the alarm.
Hour
Seconds
Day
Day of week
PM indicator
Minutes
Hour
Alarm on indicator
Hourly time signal
on indicator
Mode indicator
Minutes
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 59
minutes, 59.99 seconds.
Start
Stop
Re-start
Stop
Clear
Start
Split
Split release
Stop
Clear
Start
Split
Stop
Split release
Clear
First runner
finishes.
Second runner
finishes.
Record time of
first runner.
Record time of
second runner.
(a) Elapsed time measurement
(b) Split time measurement
(c) Split time and 1st-2nd place times
TIME SETTING MODE
To set the time and date
1. Use B to enter the Time Setting Mode.
· The seconds digits flash because they are selected.
2. Press C to change the selection in the following se-
quence.
Minutes
Month
Seconds
Hour
Day of week
Day
3. While the seconds digits are selected (flashing), press A to reset the seconds to
"00". If you press A while the seconds count is in the range of 30 to 59, the sec-
onds are reset to "00" and 1 is added to the minutes. If the seconds count is in the
range of 00 to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press A to in-
crease the number. While the day of the week is selected, pressing A advances
to the next day. Holding down A changes the current selection at high speed.
5. After you set the time and date, press B to return to the Timekeeping Mode.
· If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
Mode indicator
1/100 second
Minutes
Seconds
Split time indicator
Hour
Seconds
Day
Day of week
PM indicator
Minutes