background image
Operation Guide ANALOG (HK-O)
1
MA0402-EA
[Modules 1362, 1398, 1770, 2799, 3378]
To Set Time
Pull the crown out. Set the hands by turning
the crown in either direction. Push the crown
in on a time signal.
Crown
[Modules 705, 706, 1300, 1311, 1330, 1344, 1360,
1399, 1747, 1771]
To Set Time
1) Pull the crown out when the
second hand is at 12 o'clock
position and the second hand
stops.
2) Set the hands by turning the
crown.
3) In accordance with a time
signal, push the crown in.
[Module 1782]
Crown
First click
(Setting
date)
Second click
(Setting time)
Crown
(Normal position)
[Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787,
2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784,
3363, 3711, 3712]
To Set Time
1) Pull the crown out to the second click
when the second hand is at
12 o'clock position and the second
hand stops.
2) Set the hands by turning the crown.
3) In accordance with a time signal,
push the crown in.
To Set Date
1) Pull the crown out to the first click.
2) Set the date by turning the crown.
3) Push the crown in to the normal
position.
The configuration of your
watch may differ
somewhat from that shown
in the illustration.
[Modules 709, 1333, 1347, 3716]
To Set Time
1) Pull the crown out to the second click
when the second hand is at the
12 o'clock position and the second
hand stops.
2) Turn the hands clockwise and put
the watch four or five minutes
forward. Then back them out.
3) Push the crown in to the normal
position on a time signal.
To Set Day-date
1) Pull the crown out to the first click.
2) Set the date by turning the crown
counterclockwise.
Set the day by turning the crown
clockwise.
Check whether the day is English or
Spanish.
3) Push the crown in to the normal
position.
[Day display]
English
Spanish
SUN
DOM
MON
LUN
TUE
MAR
WED
MIER
THU
JUEV
FRI
VIER
SAT
SAB
SUN 30
Crown
(Normal position)
First click
(Setting
day-date)
Second click
(Setting time)
I Avoid setting the day-date between 8:00 p.m. and 1:00 a.m.
(the day-date display may not change in the following day).
I For watch with the elapsed time bezel
Rotate the elapsed time bezel to align the
mark with the minute hand.
After certain amount of time elapsed, read the
graduation on the elapsed time bezel which
the minute hand points to.
The elapsed time is indicated.
· Some water resistant models are equipped
with a screw lock crown.
· With such models, you must unscrew the
crown in the direction noted in the illustration
to loosen it before you can pull it out. Do not
pull too forcibly on such crowns.
· Also note that such watches are not water
resistant while their crowns are loosened.
Be sure to screw the crowns back in as far
as they will go after making any setting.
50
40
30
20
10
Elapsed time bezel