background image
1879-1
Module No.1879
GENERAL GUIDE
· If the contents of the display seem to be continually changing, see "AUTO DISPLAY FUNCTION" for information on how to stop it.
· Press C
C
C
C
C to change from mode to mode.
· In any mode, press L
L
L
L
L to illuminate the display for about 1 second.
About the backlight
In any mode, press L
L
L
L
L to illuminate the display for about 1 second.
· The backlight of the watch employs an electro-luminescent (EL) light, which loses
illuminating power after very long use.
· The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
· The watch will emit an audible sound whenever the display is illuminated. This is
caused by a transistor that vibrates when the EL panel lights up. It does not indi-
cate malfunction of the watch.
· The backlight automatically turns off whenever an alarm sounds.
SETTING TIME AND DATE
1)Press B
B
B
B
B in the Timekeeping Mode to set correct time.
2)Press A
A
A
A
A with a time tone to correct seconds.
3)Press C
C
C
C
C to shift flashing digit(s).
Digit(s) to be changed will flash.
4)Each press of A
A
A
A
A increases digit by one.
Hold down for rapid advance.
5)Press B
B
B
B
B twice to complete setting.
Note: If you use any other mode within 30 seconds while the calculation is carried
out, your new entries may fail to be inputted.
(This operation, however, should never damage your watch.)
SETTING LOCATION DATA
1)Press B
B
B
B
B twice in the Timekeeping Mode to
set new location data.
Set time difference from GMT, longitude and
latitude.
2)Press A
A
A
A
A to advance hour.*
3)Press C
C
C
C
C to set longitude.
Press A
A
A
A
A or D
D
D
D
D to change the longitude digits.*
4)Press C
C
C
C
C to set latitude.
Press A
A
A
A
A or D
D
D
D
D to change the latitude digits.*
*Hold down for a few seconds for rapid ad-
vance.
5)Press B
B
B
B
B to complete.
The display automatically returns to the Timekeeping Mode, if left unused for a few
minutes.
Note: If you use any other mode within 30 seconds while the calculation is carried
out, your new entries may fail to be inputted.
Seconds
Day of week
Day
Month
Hour
Minutes
Year
Press
Press
Press
Press
MOON GRAPH DISPLAY
Moon Age
Display
Moon Age
Time elapsed in days from the new moon is called the moon age.
Moon
New Moon
First Quarter
Full Moon
Last Quarter
New Moon
Phase
(0.0)
(7.4)
(14.8)
(22.1)
(29.5)
Moon
0.0
1.9
5.6
9.3
13.0
16.7
20.3
24.0
27.7
~~
~~
~~
~~
~
age
1.8
5.5
9.2
12.9
16.6
20.2
23.9
27.6
29.5
Moon angle
The hour angle of moon tells in
what direction the moon is seen.
Example
In the example at left, the moon has passed the meridian.
If you look above the moon near the equator, the moon is
seen at west. In Northern hemisphere the moon is seen at
west from the south. In Southern hemisphere, the moon is
seen at west from the north.
12
12
18
0
6
11.5 ~ 12.5
12.5 ~ 13.5
13.5 ~ 14.5
14.5 ~ 15.5
15.5 ~ 16.5
16.5 ~ 17.5
17.5 ~ 18.5
18.5 ~ 19.5
19.5 ~ 20.5
20.5 ~ 21.5
21.5 ~ 22.5
22.5 ~ 23.5
23.5 ~ 0.5
0.5 ~ 1.5
1.5 ~ 2.5
2.5 ~ 3.5
3.5 ~ 4.5
4.5 ~ 5.5
5.5 ~ 6.5
6.5 ~ 7.5
7.5 ~ 8.5
8.5 ~ 9.5
9.5 ~ 10.5
10.5 ~ 11.5
11.5 ~ 12.5
12
12
18
0
6
USING FISHING TIME MODE
Press C
C
C
C
C to get to the Fishing Time Mode from Timekeeping Mode. Wait a few sec-
onds and the display automatically starts to show the following:
1)Time of each moon hour angle, alternatively between 0h, 6h, 12h and 18h, 2) Moon
age, 3) Moon phase.
?
?
?
?
1)Time of
each moon
hour angle
(18h)
Fishing time indicator
1)Time of
each moon
hour angle
(0h)
1) Time of
each moon
hour angle
(6h)
1)Time of
each moon
hour angle
(12h)
2) Moon age
3)Moon phase
If the fishing times on other days are required, press
A
A
A
A
A (+ one day) or D
D
D
D
D (­ one day) in the Fishing Time
Mode to set the required date. Hold down for rapid
advance. When the required date is correctly set,
wait approx. 20 seconds. The display will auto-
matically show the following data for the required
date: 1) time of each moon hour angle, alternative-
ly between 0h, 6h, 12h and 18h, 2) moon age, 3)
moon phase.
* As the value of moon hour angle is based on the
movement of the moon and not the sun, the fourth
fishing time data (for 18h) may be missed. In such
a case, the display will appear as below:
Note: Fishing time is indicated
by 5 minutes unit.
?
?
­ one day
+ one day
It is well known from the long experience of fishermen that movement of the moon
and tides affect fish. In the United States there exist many fishing time theories
based on the movement of the moon.
Data displayed is astronomical information on the moon.
Take the challenge to fish using this data.
Relationship between hour angles of moon, moon age and fish marks
Moon phases
New moon
Full moon
First quarter
Last quarter
Others
No indication
0h or 12h
6h or 18h
Hour angles of
moon is other
than 0h, 6h, 12h
and 18h.
Hour angles
of moon
12
12
18
0
6
12
12
18
0
6
Press C
C
C
C
C
?
?
?
Timekeeping Mode
Fishing Time Mode
Sunrise & Sunset Mode
Stopwatch Mode
Alarm Mode
Press C
C
C
C
C
Press C
C
C
C
C
Press C
C
C
C
C
Press C
C
C
C
C
Hour angle of moon
Moon phase
Month ­ Day
Changes between
12-/24-hour formats.
Hour
PM
Minutes
Seconds
Pressed to view
Sunrise & Sunset
Mode.
Day of week


background image
1879-2
Hour
Minutes
USING STOPWATCH
A signal confirms each button operation.
Working range
Total elapsed time display is limited to 23 hours 59 minutes 59.99 seconds.
Thereafter it will be automatically reset and started again.
Tips...
· Various moon time information for a specification can
be calculated by inputting of longitude, latitude and time
difference from GMT. Therefore correct entries are nec-
essary.
For world time zones, see the time zone chart booklet
attached.
· When summer time adjustment is made, don't forget to
adjust time difference from GMT.
· When location is changed, new location data should be
inputted to get correct moon time information.
· When the watch shows wrong moon time information
compared with actual observed values, or estimated
values by public authorities, check entries in the follow-
ing order: year setting, time difference from GMT, LON-
GITUDE, LATITUDE, EAST OR WEST, NORTH OR
SOUTH.
Net time measurement
Start
Stop
Re-start
Stop
Reset
Start
Split
Split release
Stop
Reset
Start
Split
Stop
Split release
Reset
Split time measurement
1st-2nd place times
The first runner
finishes.
The second runner
finishes.
Record the time of
the first runner.
Record the time of
the second runner.
(Time loss)
AUTO DISPLAY FUNCTION
The Auto Display function of this watch continually changes the contents of the display.
Note that you cannot use any of the watch's other functions while the Auto Display
function is operating.
To turn the Auto Display on
Hold down C
C
C
C
C for about two or three seconds in any mode until the watch beeps.
To turn the Auto Display off
Hold down C
C
C
C
C for about two or three seconds until the watch beeps. At this time the
watch is in the Timekeeping Mode.
Note
The Auto Display function cannot be performed while you are making settings (i.e.
while digits or other setting are flashing on the display).
USING SUNRISE & SUNSET MODE
A few seconds after pressing C
C
C
C
C twice in the Time-
keeping Mode, the display will move to the Sunrise
& Sunset Mode. The display shows sunrise time,
moon age, and moon phase for the date indicated
in the time mode. When sunrise, sunset, and moon
age data for other dates is required, press A
A
A
A
A or D
D
D
D
D
in this mode to obtain the required date. Hold down
for rapid advance. When required date has been
set, the display will show sunrise, sunset, and moon
age data for this date after approx. 20 seconds.
Precaution for Sunrise & Sunset Mode
· The sunrise or sunset time is that of the surface
at 0 meter sea level. (So, it is not able that the
sunrise or sunset time displayed may include an
error depending on where you are.)
· Minimum display unit is: approx. ±5 minutes where is at less than 50° in latitude and
approx.
±10 minutes at 50° or more in latitude.
· Sunrise & sunset time is indicated by 5 minutes unit.
USING DAILY ALARM
The alarm beeper will sound for 20 seconds everyday the
preset time until cleared when daily alarm is set. Press
any button to stop beeper.
A signal will sound every hour on the hour if time signal is
set.
Sound demonstration
Press and hold A
A
A
A
A in Alarm Mode to sound beeper.
1)Press B
B
B
B
B in the Alarm Mode to set new alarm time.
2)Each press of C
C
C
C
C shifts the flashing position.
3)Pressing A
A
A
A
A increase digit by one. Hold down for rapid
advance.
4)Press B
B
B
B
B to complete.
Display automatically returns to initial Alarm Mode dis-
play if left unused for a few minutes.
On or off setting of alarm and time signal
In the Alarm Mode, each push of D
D
D
D
D button will change alarm ON/OFF as follows.
Moon age
Moon phase
Sunrise
time
Sunset time
appears when alarm is ON.
appears when time signal is ON.
1/100 second
SPLIT/RESET
START/STOP
Mode indicator
Hour
Minutes
Seconds


background image
1879-2
Hour
Minutes
USING STOPWATCH
A signal confirms each button operation.
Working range
Total elapsed time display is limited to 23 hours 59 minutes 59.99 seconds.
Thereafter it will be automatically reset and started again.
Tips...
· Various moon time information for a specification can
be calculated by inputting of longitude, latitude and time
difference from GMT. Therefore correct entries are nec-
essary.
For world time zones, see the time zone chart booklet
attached.
· When summer time adjustment is made, don't forget to
adjust time difference from GMT.
· When location is changed, new location data should be
inputted to get correct moon time information.
· When the watch shows wrong moon time information
compared with actual observed values, or estimated
values by public authorities, check entries in the follow-
ing order: year setting, time difference from GMT, LON-
GITUDE, LATITUDE, EAST OR WEST, NORTH OR
SOUTH.
Net time measurement
Start
Stop
Re-start
Stop
Reset
Start
Split
Split release
Stop
Reset
Start
Split
Stop
Split release
Reset
Split time measurement
1st-2nd place times
The first runner
finishes.
The second runner
finishes.
Record the time of
the first runner.
Record the time of
the second runner.
(Time loss)
AUTO DISPLAY FUNCTION
The Auto Display function of this watch continually changes the contents of the display.
Note that you cannot use any of the watch's other functions while the Auto Display
function is operating.
To turn the Auto Display on
Hold down C
C
C
C
C for about two or three seconds in any mode until the watch beeps.
To turn the Auto Display off
Hold down C
C
C
C
C for about two or three seconds until the watch beeps. At this time the
watch is in the Timekeeping Mode.
Note
The Auto Display function cannot be performed while you are making settings (i.e.
while digits or other setting are flashing on the display).
USING SUNRISE & SUNSET MODE
A few seconds after pressing C
C
C
C
C twice in the Time-
keeping Mode, the display will move to the Sunrise
& Sunset Mode. The display shows sunrise time,
moon age, and moon phase for the date indicated
in the time mode. When sunrise, sunset, and moon
age data for other dates is required, press A
A
A
A
A or D
D
D
D
D
in this mode to obtain the required date. Hold down
for rapid advance. When required date has been
set, the display will show sunrise, sunset, and moon
age data for this date after approx. 20 seconds.
Precaution for Sunrise & Sunset Mode
· The sunrise or sunset time is that of the surface
at 0 meter sea level. (So, it is not able that the
sunrise or sunset time displayed may include an
error depending on where you are.)
· Minimum display unit is: approx. ±5 minutes where is at less than 50° in latitude and
approx.
±10 minutes at 50° or more in latitude.
· Sunrise & sunset time is indicated by 5 minutes unit.
USING DAILY ALARM
The alarm beeper will sound for 20 seconds everyday the
preset time until cleared when daily alarm is set. Press
any button to stop beeper.
A signal will sound every hour on the hour if time signal is
set.
Sound demonstration
Press and hold A
A
A
A
A in Alarm Mode to sound beeper.
1)Press B
B
B
B
B in the Alarm Mode to set new alarm time.
2)Each press of C
C
C
C
C shifts the flashing position.
3)Pressing A
A
A
A
A increase digit by one. Hold down for rapid
advance.
4)Press B
B
B
B
B to complete.
Display automatically returns to initial Alarm Mode dis-
play if left unused for a few minutes.
On or off setting of alarm and time signal
In the Alarm Mode, each push of D
D
D
D
D button will change alarm ON/OFF as follows.
Moon age
Moon phase
Sunrise
time
Sunset time
appears when alarm is ON.
appears when time signal is ON.
1/100 second
SPLIT/RESET
START/STOP
Mode indicator
Hour
Minutes
Seconds